| dnl -*- mode: m4 -*- |
| AC_PREREQ(2.52) |
| |
| m4_define([dbus_major_version], [1]) |
| m4_define([dbus_minor_version], [4]) |
| m4_define([dbus_micro_version], [0]) |
| m4_define([dbus_version], |
| [dbus_major_version.dbus_minor_version.dbus_micro_version]) |
| AC_INIT(dbus, [dbus_version]) |
| |
| AC_CANONICAL_HOST |
| AC_LIBTOOL_WIN32_DLL |
| AC_LIBTOOL_RC |
| |
| AM_INIT_AUTOMAKE([1.9 tar-ustar]) |
| AM_CONFIG_HEADER(config.h) |
| |
| # Honor aclocal flags |
| ACLOCAL="$ACLOCAL $ACLOCAL_FLAGS" |
| |
| GETTEXT_PACKAGE=dbus-1 |
| AC_SUBST(GETTEXT_PACKAGE) |
| AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE,"$GETTEXT_PACKAGE",[The name of the gettext domain]) |
| |
| ## must come before we use the $USE_MAINTAINER_MODE variable later |
| AM_MAINTAINER_MODE |
| |
| m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])]) |
| |
| AC_DEFINE_UNQUOTED(DBUS_DAEMON_NAME,"dbus-daemon",[Name of executable]) |
| |
| # libtool versioning - this applies to libdbus |
| # |
| # See http://sources.redhat.com/autobook/autobook/autobook_91.html#SEC91 for details |
| # |
| |
| ## increment if the interface has additions, changes, removals. |
| LT_CURRENT=8 |
| |
| ## increment any time the source changes; set to |
| ## 0 if you increment CURRENT |
| LT_REVISION=2 |
| |
| ## increment if any interfaces have been added; set to 0 |
| ## if any interfaces have been changed or removed. removal has |
| ## precedence over adding, so set to 0 if both happened. |
| LT_AGE=5 |
| |
| AC_SUBST(LT_CURRENT) |
| AC_SUBST(LT_REVISION) |
| AC_SUBST(LT_AGE) |
| |
| DBUS_MAJOR_VERSION=dbus_major_version |
| DBUS_MINOR_VERSION=dbus_minor_version |
| DBUS_MICRO_VERSION=dbus_micro_version |
| DBUS_VERSION=dbus_major_version.dbus_minor_version.dbus_micro_version |
| |
| AC_SUBST(DBUS_MAJOR_VERSION) |
| AC_SUBST(DBUS_MINOR_VERSION) |
| AC_SUBST(DBUS_MICRO_VERSION) |
| AC_SUBST(DBUS_VERSION) |
| |
| AC_PROG_CC |
| AM_PROG_CC_C_O |
| AC_PROG_CXX |
| AC_USE_SYSTEM_EXTENSIONS |
| AC_ISC_POSIX |
| AC_HEADER_STDC |
| AC_C_INLINE |
| AM_PROG_LIBTOOL |
| AC_PROG_MKDIR_P |
| |
| # Set some internal variables depending on the platform for later use. |
| dbus_win=no |
| dbus_cygwin=no |
| dbus_unix=no |
| case "${host}" in |
| *-mingw32ce*) |
| dbus_win=yes |
| dbus_wince=yes |
| ;; |
| *-mingw32*) |
| dbus_win=yes |
| ;; |
| *-cygwin*) |
| dbus_cygwin=yes |
| dbus_unix=yes |
| ;; |
| *) |
| dbus_unix=yes |
| ;; |
| esac |
| |
| # Special defines for certain platforms |
| if test "$dbus_win" = yes; then |
| AC_DEFINE(DBUS_WIN,1,[Defined if we run on a W32 API based system]) |
| BUILD_TIMESTAMP=`date --iso-8601=minutes` |
| AC_SUBST(BUILD_TIMESTAMP) |
| # Assume DBUS_VERSION is always three numbers |
| BUILD_FILEVERSION=`echo "$DBUS_VERSION" | sed -e 's/\./,/g'`,0 |
| AC_SUBST(BUILD_FILEVERSION) |
| AC_CHECK_TOOL(WINDRES, windres, no) |
| if test "$WINDRES" = no; then |
| AC_MSG_ERROR([*** Could not find an implementation of windres in your PATH.]) |
| fi |
| if test "$dbus_wince" = yes; then |
| AC_DEFINE(DBUS_WINCE,1,[Defined if we run on a W32 CE API based system]) |
| AC_DEFINE(_WIN32_WCE, 0x0502, [Defined to get newer W32 CE APIs]) |
| fi |
| else |
| AC_DEFINE(DBUS_UNIX,1,[Defined if we run on a Unix-based system]) |
| fi |
| if test "$dbus_cygwin" = yes; then |
| AC_DEFINE(DBUS_CYGWIN,1,[Defined if we run on a cygwin API based system]) |
| fi |
| |
| AM_CONDITIONAL(DBUS_WIN, test "$dbus_win" = yes) |
| AM_CONDITIONAL(DBUS_WINCE, test "$dbus_wince" = yes) |
| AM_CONDITIONAL(DBUS_UNIX, test "$dbus_unix" = yes) |
| AM_CONDITIONAL(DBUS_CYGWIN, test "$dbus_cygwin" = yes) |
| |
| AC_ARG_ENABLE(tests, AS_HELP_STRING([--enable-tests],[enable unit test code]),enable_tests=$enableval,enable_tests=$USE_MAINTAINER_MODE) |
| AC_ARG_ENABLE(ansi, AS_HELP_STRING([--enable-ansi],[enable -ansi -pedantic gcc flags]),enable_ansi=$enableval,enable_ansi=no) |
| AC_ARG_ENABLE(verbose-mode, AS_HELP_STRING([--enable-verbose-mode],[support verbose debug mode]),enable_verbose_mode=$enableval,enable_verbose_mode=$USE_MAINTAINER_MODE) |
| AC_ARG_ENABLE(asserts, AS_HELP_STRING([--enable-asserts],[include assertion checks]),enable_asserts=$enableval,enable_asserts=$USE_MAINTAINER_MODE) |
| AC_ARG_ENABLE(checks, AS_HELP_STRING([--enable-checks],[include sanity checks on public API]),enable_checks=$enableval,enable_checks=yes) |
| AC_ARG_ENABLE(xml-docs, AS_HELP_STRING([--enable-xml-docs],[build XML documentation (requires xmlto)]),enable_xml_docs=$enableval,enable_xml_docs=auto) |
| AC_ARG_ENABLE(doxygen-docs, AS_HELP_STRING([--enable-doxygen-docs],[build DOXYGEN documentation (requires Doxygen)]),enable_doxygen_docs=$enableval,enable_doxygen_docs=auto) |
| AC_ARG_ENABLE(gcov, AS_HELP_STRING([--enable-gcov],[compile with coverage profiling instrumentation (gcc only)]),enable_gcov=$enableval,enable_gcov=no) |
| AC_ARG_ENABLE(abstract-sockets, AS_HELP_STRING([--enable-abstract-sockets],[use abstract socket namespace (linux only)]),enable_abstract_sockets=$enableval,enable_abstract_sockets=auto) |
| AC_ARG_ENABLE(selinux, AS_HELP_STRING([--enable-selinux],[build with SELinux support]),enable_selinux=$enableval,enable_selinux=auto) |
| AC_ARG_ENABLE(libaudit,AS_HELP_STRING([--enable-libaudit],[build audit daemon support for SELinux]),enable_libaudit=$enableval,enable_libaudit=auto) |
| AC_ARG_ENABLE(dnotify, AS_HELP_STRING([--enable-dnotify],[build with dnotify support (linux only)]),enable_dnotify=$enableval,enable_dnotify=auto) |
| AC_ARG_ENABLE(inotify, AS_HELP_STRING([--enable-inotify],[build with inotify support (linux only)]),enable_inotify=$enableval,enable_inotify=auto) |
| AC_ARG_ENABLE(kqueue, AS_HELP_STRING([--enable-kqueue],[build with kqueue support]),enable_kqueue=$enableval,enable_kqueue=auto) |
| AC_ARG_ENABLE(console-owner-file, AS_HELP_STRING([--enable-console-owner-file],[enable console owner file]),enable_console_owner_file=$enableval,enable_console_owner_file=auto) |
| AC_ARG_ENABLE(userdb-cache, AS_HELP_STRING([--enable-userdb-cache],[build with userdb-cache support]),enable_userdb_cache=$enableval,enable_userdb_cache=yes) |
| |
| AC_ARG_WITH(xml, AS_HELP_STRING([--with-xml=[libxml/expat]],[XML library to use])) |
| AC_ARG_WITH(init-scripts, AS_HELP_STRING([--with-init-scripts=[redhat]],[Style of init scripts to install])) |
| AC_ARG_WITH(session-socket-dir, AS_HELP_STRING([--with-session-socket-dir=[dirname]],[Where to put sockets for the per-login-session message bus])) |
| AC_ARG_WITH(test-socket-dir, AS_HELP_STRING([--with-test-socket-dir=[dirname]],[Where to put sockets for make check])) |
| AC_ARG_WITH(system-pid-file, AS_HELP_STRING([--with-system-pid-file=[pidfile]],[PID file for systemwide daemon])) |
| AC_ARG_WITH(system-socket, AS_HELP_STRING([--with-system-socket=[filename]],[UNIX domain socket for systemwide daemon])) |
| AC_ARG_WITH(console-auth-dir, AS_HELP_STRING([--with-console-auth-dir=[dirname]],[directory to check for console ownerhip])) |
| AC_ARG_WITH(console-owner-file, AS_HELP_STRING([--with-console-owner-file=[filename]],[file whose owner determines current console owner])) |
| AC_ARG_WITH(dbus_user, AS_HELP_STRING([--with-dbus-user=<user>],[User for running the DBUS daemon (messagebus)])) |
| AC_ARG_WITH(dbus_daemondir, AS_HELP_STRING([--with-dbus-daemondir=[dirname]],[Directory for installing the DBUS daemon])) |
| |
| dnl DBUS_BUILD_TESTS controls unit tests built in to .c files |
| dnl and also some stuff in the test/ subdir |
| AM_CONDITIONAL(DBUS_BUILD_TESTS, test x$enable_tests = xyes) |
| if test x$enable_tests = xyes; then |
| AC_DEFINE(DBUS_BUILD_TESTS,1,[Build test code]) |
| fi |
| |
| if test x$enable_verbose_mode = xyes; then |
| AC_DEFINE(DBUS_ENABLE_VERBOSE_MODE,1,[Support a verbose mode]) |
| fi |
| |
| if test x$enable_asserts = xno; then |
| AC_DEFINE(DBUS_DISABLE_ASSERT,1,[Disable assertion checking]) |
| AC_DEFINE(G_DISABLE_ASSERT,1,[Disable GLib assertion macros]) |
| R_DYNAMIC_LDFLAG="" |
| else |
| # -rdynamic is needed for glibc's backtrace_symbols to work. |
| # No clue how much overhead this adds, but it's useful |
| # to do this on any assertion failure, |
| # so for now it's enabled anytime asserts are (currently not |
| # in production builds). |
| |
| # To get -rdynamic you pass -export-dynamic to libtool. |
| AC_DEFINE(DBUS_BUILT_R_DYNAMIC,1,[whether -export-dynamic was passed to libtool]) |
| R_DYNAMIC_LDFLAG=-export-dynamic |
| fi |
| AC_SUBST(R_DYNAMIC_LDFLAG) |
| |
| if test x$enable_checks = xno; then |
| AC_DEFINE(DBUS_DISABLE_CHECKS,1,[Disable public API sanity checking]) |
| AC_DEFINE(G_DISABLE_CHECKS,1,[Disable GLib public API sanity checking]) |
| fi |
| |
| if test x$enable_userdb_cache = xyes; then |
| AC_DEFINE(DBUS_ENABLE_USERDB_CACHE,1,[Build with caching of user data]) |
| fi |
| |
| if test x$enable_gcov = xyes; then |
| ## so that config.h changes when you toggle gcov support |
| AC_DEFINE_UNQUOTED(DBUS_GCOV_ENABLED, 1, [Defined if gcov is enabled to force a rebuild due to config.h changing]) |
| |
| AC_MSG_CHECKING([for gcc 3.3 version of gcov file format]) |
| have_gcc33_gcov=no |
| AC_RUN_IFELSE( [AC_LANG_PROGRAM( , [[ if (__GNUC__ >=3 && __GNUC_MINOR__ >= 3) exit (0); else exit (1); ]])], |
| have_gcc33_gcov=yes) |
| if test x$have_gcc33_gcov = xyes ; then |
| AC_DEFINE_UNQUOTED(DBUS_HAVE_GCC33_GCOV, 1, [Defined if we have gcc 3.3 and thus the new gcov format]) |
| fi |
| AC_MSG_RESULT($have_gcc33_gcov) |
| fi |
| AM_CONDITIONAL(DBUS_GCOV_ENABLED, test x$enable_gcov = xyes) |
| |
| # glibc21.m4 serial 3 |
| dnl Copyright (C) 2000-2002, 2004 Free Software Foundation, Inc. |
| dnl This file is free software; the Free Software Foundation |
| dnl gives unlimited permission to copy and/or distribute it, |
| dnl with or without modifications, as long as this notice is preserved. |
| |
| # Test for the GNU C Library, version 2.1 or newer. |
| # From Bruno Haible. |
| |
| AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer, |
| ac_cv_gnu_library_2_1, |
| [AC_EGREP_CPP([Lucky GNU user], |
| [ |
| #include <features.h> |
| #ifdef __GNU_LIBRARY__ |
| #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2) |
| Lucky GNU user |
| #endif |
| #endif |
| ], |
| ac_cv_gnu_library_2_1=yes, |
| ac_cv_gnu_library_2_1=no) |
| ] |
| ) |
| |
| #### Integer sizes |
| |
| AC_CHECK_SIZEOF(char) |
| AC_CHECK_SIZEOF(short) |
| AC_CHECK_SIZEOF(long) |
| AC_CHECK_SIZEOF(int) |
| AC_CHECK_SIZEOF(void *) |
| AC_CHECK_SIZEOF(long long) |
| AC_CHECK_SIZEOF(__int64) |
| |
| ### See what our 64 bit type is called |
| AC_MSG_CHECKING([64-bit integer type]) |
| |
| case 8 in |
| $ac_cv_sizeof_int) |
| dbusint64=int |
| dbusint64_constant='(val)' |
| dbusuint64_constant='(val)' |
| dbusint64_printf_modifier='""' |
| ;; |
| $ac_cv_sizeof_long) |
| dbusint64=long |
| dbusint64_constant='(val##L)' |
| dbusuint64_constant='(val##UL)' |
| dbusint64_printf_modifier='"l"' |
| ;; |
| $ac_cv_sizeof_long_long) |
| dbusint64='long long' |
| dbusint64_constant='(val##LL)' |
| dbusuint64_constant='(val##ULL)' |
| # Ideally we discover what the format is, but this is |
| # only used in verbose mode, so eh... |
| if test x"$ac_cv_gnu_library_2_1" = xyes; then |
| dbusint64_printf_modifier='"ll"' |
| fi |
| ;; |
| $ac_cv_sizeof___int64) |
| dbusint64=__int64 |
| dbusint64_constant='(val##i64)' |
| dbusuint64_constant='(val##ui64)' |
| # See above case |
| if test x"$ac_cv_gnu_library_2_1" = xyes; then |
| dbusint64_printf_modifier='"ll"' |
| fi |
| ;; |
| esac |
| |
| if test -z "$dbusint64" ; then |
| DBUS_INT64_TYPE="no_int64_type_detected" |
| DBUS_HAVE_INT64=0 |
| DBUS_INT64_CONSTANT= |
| DBUS_UINT64_CONSTANT= |
| AC_MSG_RESULT([none found]) |
| else |
| DBUS_INT64_TYPE="$dbusint64" |
| DBUS_HAVE_INT64=1 |
| DBUS_INT64_CONSTANT="$dbusint64_constant" |
| DBUS_UINT64_CONSTANT="$dbusuint64_constant" |
| if test x"$dbusint64_printf_modifier" != x; then |
| AC_DEFINE_UNQUOTED(DBUS_INT64_PRINTF_MODIFIER, [$dbusint64_printf_modifier], [Define to printf modifier for 64 bit integer type]) |
| fi |
| AC_MSG_RESULT($DBUS_INT64_TYPE) |
| fi |
| |
| AC_SUBST(DBUS_INT64_TYPE) |
| AC_SUBST(DBUS_INT64_CONSTANT) |
| AC_SUBST(DBUS_UINT64_CONSTANT) |
| AC_SUBST(DBUS_HAVE_INT64) |
| |
| ### see what 32-bit int is called |
| AC_MSG_CHECKING([32-bit integer type]) |
| |
| case 4 in |
| $ac_cv_sizeof_short) |
| dbusint32=int |
| ;; |
| $ac_cv_sizeof_int) |
| dbusint32=int |
| ;; |
| $ac_cv_sizeof_long) |
| dbusint32=long |
| ;; |
| esac |
| |
| if test -z "$dbusint32" ; then |
| DBUS_INT32_TYPE="no_int32_type_detected" |
| AC_MSG_ERROR([No 32-bit integer type found]) |
| else |
| DBUS_INT32_TYPE="$dbusint32" |
| AC_MSG_RESULT($DBUS_INT32_TYPE) |
| fi |
| |
| AC_SUBST(DBUS_INT32_TYPE) |
| |
| ### see what 16-bit int is called |
| AC_MSG_CHECKING([16-bit integer type]) |
| |
| case 2 in |
| $ac_cv_sizeof_short) |
| dbusint16=short |
| ;; |
| $ac_cv_sizeof_int) |
| dbusint16=int |
| ;; |
| esac |
| |
| if test -z "$dbusint16" ; then |
| DBUS_INT16_TYPE="no_int16_type_detected" |
| AC_MSG_ERROR([No 16-bit integer type found]) |
| else |
| DBUS_INT16_TYPE="$dbusint16" |
| AC_MSG_RESULT($DBUS_INT16_TYPE) |
| fi |
| |
| AC_SUBST(DBUS_INT16_TYPE) |
| |
| ## byte order |
| case $host_os in |
| darwin*) |
| # check at compile-time, so that it is possible to build universal |
| # (with multiple architectures at once on the compile line) |
| AH_VERBATIM([WORDS_BIGENDIAN_DARWIN], [ |
| /* Use the compiler-provided endianness defines to allow universal compiling. */ |
| #if defined(__BIG_ENDIAN__) |
| #define WORDS_BIGENDIAN 1 |
| #endif |
| ]) |
| ;; |
| *) |
| AC_C_BIGENDIAN |
| ;; |
| esac |
| |
| dnl ********************************** |
| dnl *** va_copy checks (from GLib) *** |
| dnl ********************************** |
| dnl we currently check for all three va_copy possibilities, so we get |
| dnl all results in config.log for bug reports. |
| AC_CACHE_CHECK([for an implementation of va_copy()],dbus_cv_va_copy,[ |
| AC_LINK_IFELSE([#include <stdarg.h> |
| #include <stdlib.h> |
| static void f (int i, ...) { |
| va_list args1, args2; |
| va_start (args1, i); |
| va_copy (args2, args1); |
| if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42) |
| exit (1); |
| va_end (args1); va_end (args2); |
| } |
| int main() { |
| f (0, 42); |
| return 0; |
| }], |
| [dbus_cv_va_copy=yes], |
| [dbus_cv_va_copy=no]) |
| ]) |
| AC_CACHE_CHECK([for an implementation of __va_copy()],dbus_cv___va_copy,[ |
| AC_LINK_IFELSE([#include <stdarg.h> |
| #include <stdlib.h> |
| static void f (int i, ...) { |
| va_list args1, args2; |
| va_start (args1, i); |
| __va_copy (args2, args1); |
| if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42) |
| exit (1); |
| va_end (args1); va_end (args2); |
| } |
| int main() { |
| f (0, 42); |
| return 0; |
| }], |
| [dbus_cv___va_copy=yes], |
| [dbus_cv___va_copy=no]) |
| ]) |
| |
| if test "x$dbus_cv_va_copy" = "xyes"; then |
| dbus_va_copy_func=va_copy |
| else if test "x$dbus_cv___va_copy" = "xyes"; then |
| dbus_va_copy_func=__va_copy |
| fi |
| fi |
| |
| if test -n "$dbus_va_copy_func"; then |
| AC_DEFINE_UNQUOTED(DBUS_VA_COPY,$dbus_va_copy_func,[A 'va_copy' style function]) |
| fi |
| |
| AC_LANG_PUSH(C) |
| AC_CACHE_CHECK([whether va_lists can be copied by value], |
| dbus_cv_va_val_copy, |
| [AC_RUN_IFELSE([AC_LANG_PROGRAM( |
| [[ |
| #include <stdarg.h> |
| #include <stdlib.h> |
| ]], |
| [[ |
| static void f (int i, ...) { |
| va_list args1, args2; |
| va_start (args1, i); |
| args2 = args1; |
| if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42) |
| exit (1); |
| va_end (args1); va_end (args2); |
| } |
| int main() { |
| f (0, 42); |
| return 0; |
| } |
| ]])], |
| [dbus_cv_va_val_copy=yes], |
| [dbus_cv_va_val_copy=no], |
| [dbus_cv_va_val_copy=yes]) |
| ]) |
| AC_LANG_POP(C) |
| |
| if test "x$dbus_cv_va_val_copy" = "xno"; then |
| AC_DEFINE(DBUS_VA_COPY_AS_ARRAY,1, ['va_lists' cannot be copies as values]) |
| fi |
| |
| |
| #### Atomic integers |
| |
| AC_CACHE_CHECK([whether $CC knows __sync_sub_and_fetch()], |
| dbus_cv_sync_sub_and_fetch, |
| [AC_LINK_IFELSE( |
| AC_LANG_PROGRAM([], [[int a = 4; int b = __sync_sub_and_fetch(&a, 4); exit(b); ]]), |
| [dbus_cv_sync_sub_and_fetch=yes], |
| [dbus_cv_sync_sub_and_fetch=no]) |
| ]) |
| |
| if test "x$dbus_cv_sync_sub_and_fetch" = "xyes" ; then |
| have_sync=1 |
| else |
| have_sync=0 |
| fi |
| |
| AC_DEFINE_UNQUOTED([DBUS_USE_SYNC], [$have_sync], [Use the gcc __sync extension]) |
| |
| #### Various functions |
| AC_SEARCH_LIBS(socket,[socket network]) |
| AC_CHECK_FUNC(gethostbyname,,[AC_CHECK_LIB(nsl,gethostbyname)]) |
| |
| AC_CHECK_FUNCS(vsnprintf vasprintf nanosleep usleep setenv clearenv unsetenv socketpair getgrouplist fpathconf setrlimit poll setlocale localeconv strtoll strtoull) |
| |
| #### Check for broken poll; taken from Glib's configure |
| |
| AC_MSG_CHECKING([for broken poll]) |
| AC_RUN_IFELSE([AC_LANG_SOURCE([[ |
| #include <stdlib.h> |
| #include <fcntl.h> |
| #include <poll.h> |
| #ifdef HAVE_SYS_POLL_H |
| #include <sys/poll.h> |
| #endif |
| int main(void) { |
| struct pollfd fds[1]; |
| int fd; |
| fd = open("/dev/null", 1); |
| fds[0].fd = fd; |
| fds[0].events = POLLIN; |
| fds[0].revents = 0; |
| if (poll(fds, 1, 0) < 0 || (fds[0].revents & POLLNVAL) != 0) { |
| exit(1); /* Does not work for devices -- fail */ |
| } |
| exit(0); |
| }]])], |
| [broken_poll=no], |
| [broken_poll=yes |
| AC_DEFINE(BROKEN_POLL,1,[poll doesn't work on devices])], |
| [broken_poll="no (cross compiling)"]) |
| AC_MSG_RESULT($broken_poll) |
| |
| AC_MSG_CHECKING(for dirfd) |
| AC_TRY_LINK([ |
| #include <sys/types.h> |
| #include <dirent.h> |
| ],[ |
| DIR *dirp; |
| dirp = opendir("."); |
| dirfd(dirp); |
| closedir(dirp); |
| ], |
| dbus_have_dirfd=yes, dbus_have_dirfd=no) |
| AC_MSG_RESULT($dbus_have_dirfd) |
| if test "$dbus_have_dirfd" = yes; then |
| AC_DEFINE(HAVE_DIRFD,1,[Have dirfd function]) |
| else |
| AC_MSG_CHECKING(for DIR *dirp->dd_fd) |
| AC_TRY_LINK([ |
| #include <sys/types.h> |
| #include <dirent.h> |
| ],[ |
| DIR *dirp; |
| int fd; |
| dirp = opendir("."); |
| fd = dirp->dd_fd; |
| closedir(dirp); |
| ], |
| dbus_have_ddfd=yes, dbus_have_ddfd=no) |
| AC_MSG_RESULT($dbus_have_ddfd) |
| if test "$dbus_have_ddfd" = yes; then |
| AC_DEFINE(HAVE_DDFD,1,[Have the ddfd member of DIR]) |
| fi |
| fi |
| |
| AC_CHECK_HEADERS(dirent.h) |
| |
| AC_CHECK_HEADERS(execinfo.h, [AC_CHECK_FUNCS(backtrace)]) |
| |
| AC_CHECK_HEADERS(errno.h) |
| |
| AC_CHECK_HEADERS(signal.h) |
| |
| AC_CHECK_HEADERS(locale.h) |
| |
| AC_CHECK_HEADERS(byteswap.h) |
| |
| AC_CHECK_HEADERS(unistd.h) |
| |
| AC_CHECK_HEADERS(ws2tcpip.h) |
| |
| AC_CHECK_HEADERS(wspiapi.h) |
| |
| # Add -D_POSIX_PTHREAD_SEMANTICS if on Solaris |
| # |
| case $host_os in |
| solaris*) |
| CFLAGS="$CFLAGS -D_POSIX_PTHREAD_SEMANTICS" ;; |
| esac |
| |
| # checking for a posix version of getpwnam_r |
| # if we are cross compiling and can not run the test |
| # assume getpwnam_r is the posix version |
| # it is up to the person cross compiling to change |
| # this behavior if desired |
| AC_LANG_PUSH(C) |
| AC_CACHE_CHECK([for posix getpwnam_r], |
| ac_cv_func_posix_getpwnam_r, |
| [AC_RUN_IFELSE([AC_LANG_PROGRAM( |
| [[ |
| #include <errno.h> |
| #include <pwd.h> |
| ]], |
| [[ |
| char buffer[10000]; |
| struct passwd pwd, *pwptr = &pwd; |
| int error; |
| errno = 0; |
| error = getpwnam_r ("", &pwd, buffer, |
| sizeof (buffer), &pwptr); |
| return (error < 0 && errno == ENOSYS) |
| || error == ENOSYS; |
| ]])], |
| [ac_cv_func_posix_getpwnam_r=yes], |
| [ac_cv_func_posix_getpwnam_r=no], |
| [ac_cv_func_posix_getpwnam_r=yes] |
| )]) |
| AC_LANG_POP(C) |
| |
| if test "$ac_cv_func_posix_getpwnam_r" = yes; then |
| AC_DEFINE(HAVE_POSIX_GETPWNAM_R,1, |
| [Have POSIX function getpwnam_r]) |
| else |
| AC_CACHE_CHECK([for nonposix getpwnam_r], |
| ac_cv_func_nonposix_getpwnam_r, |
| [AC_TRY_LINK([#include <pwd.h>], |
| [char buffer[10000]; |
| struct passwd pwd; |
| getpwnam_r ("", &pwd, buffer, |
| sizeof (buffer));], |
| [ac_cv_func_nonposix_getpwnam_r=yes], |
| [ac_cv_func_nonposix_getpwnam_r=no])]) |
| if test "$ac_cv_func_nonposix_getpwnam_r" = yes; then |
| AC_DEFINE(HAVE_NONPOSIX_GETPWNAM_R,1, |
| [Have non-POSIX function getpwnam_r]) |
| fi |
| fi |
| |
| dnl check for socklen_t |
| AC_MSG_CHECKING(whether socklen_t is defined) |
| AC_TRY_COMPILE([ |
| #include <sys/types.h> |
| #include <sys/socket.h> |
| #include <netdb.h> |
| ],[ |
| socklen_t foo; |
| foo = 1; |
| ],dbus_have_socklen_t=yes,dbus_have_socklen_t=no) |
| AC_MSG_RESULT($dbus_have_socklen_t) |
| |
| if test "x$dbus_have_socklen_t" = "xyes"; then |
| AC_DEFINE(HAVE_SOCKLEN_T,1,[Have socklen_t type]) |
| fi |
| |
| dnl check for writev header and writev function so we're |
| dnl good to go if HAVE_WRITEV gets defined. |
| AC_CHECK_HEADERS(sys/uio.h, [AC_CHECK_FUNCS(writev)]) |
| |
| dnl needed on darwin for NAME_MAX |
| AC_CHECK_HEADERS(sys/syslimits.h) |
| |
| dnl Make it easy to check if we have MSG_NOSIGNAL without actually having to include sys/socket.h |
| AC_CHECK_DECLS([MSG_NOSIGNAL], [], [], [[ #include <sys/socket.h> ]]) |
| |
| dnl check for flavours of varargs macros (test from GLib) |
| AC_MSG_CHECKING(for ISO C99 varargs macros in C) |
| AC_TRY_COMPILE([],[ |
| int a(int p1, int p2, int p3); |
| #define call_a(...) a(1,__VA_ARGS__) |
| call_a(2,3); |
| ],dbus_have_iso_c_varargs=yes,dbus_have_iso_c_varargs=no) |
| AC_MSG_RESULT($dbus_have_iso_c_varargs) |
| |
| AC_MSG_CHECKING(for GNUC varargs macros) |
| AC_TRY_COMPILE([],[ |
| int a(int p1, int p2, int p3); |
| #define call_a(params...) a(1,params) |
| call_a(2,3); |
| ],dbus_have_gnuc_varargs=yes,dbus_have_gnuc_varargs=no) |
| AC_MSG_RESULT($dbus_have_gnuc_varargs) |
| |
| dnl Output varargs tests |
| if test x$dbus_have_iso_c_varargs = xyes; then |
| AC_DEFINE(HAVE_ISO_VARARGS,1,[Have ISO C99 varargs macros]) |
| fi |
| if test x$dbus_have_gnuc_varargs = xyes; then |
| AC_DEFINE(HAVE_GNUC_VARARGS,1,[Have GNU-style varargs macros]) |
| fi |
| |
| dnl Check for various credentials. |
| AC_MSG_CHECKING(for struct cmsgcred) |
| AC_TRY_COMPILE([ |
| #include <sys/types.h> |
| #include <sys/socket.h> |
| ],[ |
| struct cmsgcred cred; |
| |
| cred.cmcred_pid = 0; |
| ],dbus_have_struct_cmsgcred=yes,dbus_have_struct_cmsgcred=no) |
| AC_MSG_RESULT($dbus_have_struct_cmsgcred) |
| |
| if test x$dbus_have_struct_cmsgcred = xyes; then |
| AC_DEFINE(HAVE_CMSGCRED,1,[Have cmsgcred structure]) |
| fi |
| |
| AC_CHECK_FUNCS(getpeerucred getpeereid) |
| |
| AC_CHECK_FUNCS(pipe2 accept4) |
| |
| #### Abstract sockets |
| |
| if test x$enable_abstract_sockets = xauto; then |
| AC_LANG_PUSH(C) |
| warn_on_xcompile=no |
| AC_CACHE_CHECK([abstract socket namespace], |
| ac_cv_have_abstract_sockets, |
| [AC_RUN_IFELSE([AC_LANG_PROGRAM( |
| [[ |
| #include <sys/types.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <stdio.h> |
| #include <sys/socket.h> |
| #include <sys/un.h> |
| #include <errno.h> |
| ]], |
| [[ |
| int listen_fd; |
| struct sockaddr_un addr; |
| |
| listen_fd = socket (PF_UNIX, SOCK_STREAM, 0); |
| |
| if (listen_fd < 0) |
| { |
| fprintf (stderr, "socket() failed: %s\n", strerror (errno)); |
| exit (1); |
| } |
| |
| memset (&addr, '\0', sizeof (addr)); |
| addr.sun_family = AF_UNIX; |
| strcpy (addr.sun_path, "X/tmp/dbus-fake-socket-path-used-in-configure-test"); |
| addr.sun_path[0] = '\0'; /* this is what makes it abstract */ |
| |
| if (bind (listen_fd, (struct sockaddr*) &addr, SUN_LEN (&addr)) < 0) |
| { |
| fprintf (stderr, "Abstract socket namespace bind() failed: %s\n", |
| strerror (errno)); |
| exit (1); |
| } |
| else |
| exit (0); |
| ]])], |
| [ac_cv_have_abstract_sockets=yes], |
| [ac_cv_have_abstract_sockets=no], |
| [ |
| ac_cv_have_abstract_sockets=no |
| warn_on_xcompile=yes |
| ] |
| )]) |
| if test x$warn_on_xcompile = xyes ; then |
| AC_MSG_WARN([Cannot check for abstract sockets when cross-compiling, please use --enable-abstract-sockets]) |
| fi |
| AC_LANG_POP(C) |
| fi |
| |
| if test x$enable_abstract_sockets = xyes; then |
| if test x$ac_cv_have_abstract_sockets = xno; then |
| AC_MSG_ERROR([Abstract sockets explicitly required, and support not detected.]) |
| fi |
| fi |
| |
| if test x$enable_abstract_sockets = xno; then |
| ac_cv_have_abstract_sockets=no; |
| fi |
| |
| if test x$ac_cv_have_abstract_sockets = xyes ; then |
| DBUS_PATH_OR_ABSTRACT=abstract |
| AC_DEFINE(HAVE_ABSTRACT_SOCKETS,1,[Have abstract socket namespace]) |
| else |
| DBUS_PATH_OR_ABSTRACT=path |
| fi |
| |
| # this is used in addresses to prefer abstract, e.g. |
| # unix:path=/foo or unix:abstract=/foo |
| AC_SUBST(DBUS_PATH_OR_ABSTRACT) |
| |
| PKG_PROG_PKG_CONFIG |
| |
| #### Sort out XML library |
| |
| # see what we have |
| AC_CHECK_LIB(expat, XML_ParserCreate_MM, |
| [ AC_CHECK_HEADERS(expat.h, have_expat=true, have_expat=false) ], |
| have_expat=false) |
| |
| # see what we want to use |
| dbus_use_libxml=false |
| dbus_use_expat=false |
| if test x$with_xml = xexpat; then |
| if ! $have_expat ; then |
| AC_MSG_ERROR([Explicitly requested expat but expat not found]) |
| fi |
| dbus_use_expat=true |
| elif test x$with_xml = xlibxml; then |
| PKG_CHECK_MODULES(LIBXML, libxml-2.0 >= 2.6.0, have_libxml=true, have_libxml=false) |
| if ! $have_libxml ; then |
| AC_MSG_ERROR([Explicitly requested libxml but libxml not found]) |
| fi |
| dbus_use_libxml=true |
| else |
| ### expat is the default because libxml can't currently survive |
| ### our brutal OOM-handling unit test setup. |
| ### http://bugzilla.gnome.org/show_bug.cgi?id=109368 |
| if test x$have_expat = xfalse; then |
| AC_MSG_ERROR([Could not find expat.h, check config.log for failed attempts]) |
| fi |
| ### By default, only use Expat since it's tested and known to work. If you're a |
| ### general-purpose OS vendor, please don't enable libxml. For embedded use |
| ### if your OS is built around libxml, that's another case. |
| dbus_use_expat=true |
| fi |
| |
| AM_CONDITIONAL(DBUS_USE_EXPAT, $dbus_use_expat) |
| AM_CONDITIONAL(DBUS_USE_LIBXML, $dbus_use_libxml) |
| |
| if $dbus_use_expat; then |
| XML_LIBS=-lexpat |
| XML_CFLAGS= |
| fi |
| if $dbus_use_libxml; then |
| XML_LIBS=$LIBXML_LIBS |
| XML_CFLAGS=$LIBXML_CFLAGS |
| fi |
| |
| # Thread lib detection |
| AC_CHECK_FUNC(pthread_cond_timedwait,[AC_CHECK_LIB(pthread,pthread_cond_timedwait, |
| [THREAD_LIBS="-lpthread"])]) |
| save_libs="$LIBS" |
| LIBS="$LIBS $THREAD_LIBS" |
| AC_CHECK_FUNC(pthread_condattr_setclock,have_pthread_condattr_setclock=true,have_pthread_condattr_setclock=false) |
| if test x$have_pthread_condattr_setclock = xtrue; then |
| AC_SEARCH_LIBS([clock_getres],[rt],[THREAD_LIBS="$THREAD_LIBS -lrt"]) |
| AC_MSG_CHECKING([for CLOCK_MONOTONIC]) |
| AC_TRY_COMPILE([#include <time.h> |
| #include <pthread.h> |
| ], [ |
| struct timespec monotonic_timer; |
| pthread_condattr_t attr; |
| pthread_condattr_init (&attr); |
| pthread_condattr_setclock (&attr, CLOCK_MONOTONIC); |
| clock_getres (CLOCK_MONOTONIC,&monotonic_timer); |
| ], have_clock_monotonic=true, have_clock_monotonic=false) |
| if test x$have_clock_monotonic = xtrue; then |
| AC_MSG_RESULT([found]) |
| AC_DEFINE(HAVE_MONOTONIC_CLOCK, 1, [Define if we have CLOCK_MONOTONIC]) |
| else |
| AC_MSG_RESULT([not found]) |
| fi |
| fi |
| LIBS="$save_libs" |
| |
| # SELinux detection |
| if test x$enable_selinux = xno ; then |
| have_selinux=no; |
| else |
| # See if we have SELinux library |
| AC_CHECK_LIB(selinux, is_selinux_enabled, |
| have_selinux=yes, have_selinux=no) |
| |
| # see if we have the SELinux header with the new D-Bus stuff in it |
| if test x$have_selinux = xyes ; then |
| AC_MSG_CHECKING([for DBUS Flask permissions in selinux/av_permissions.h]) |
| AC_TRY_COMPILE([#include <selinux/av_permissions.h>], |
| [#ifdef DBUS__ACQUIRE_SVC return 0; |
| #else |
| #error DBUS__ACQUIRE_SVC not defined |
| #endif], |
| have_selinux=yes, have_selinux=no) |
| AC_MSG_RESULT($have_selinux) |
| fi |
| |
| if test x$enable_selinux = xauto ; then |
| if test x$have_selinux = xno ; then |
| AC_MSG_WARN([Sufficiently new SELinux library not found]) |
| fi |
| else |
| if test x$have_selinux = xno ; then |
| AC_MSG_ERROR([SElinux explicitly required, and SELinux library not found]) |
| fi |
| fi |
| fi |
| |
| AM_CONDITIONAL(HAVE_SELINUX, test x$have_selinux = xyes) |
| |
| if test x$have_selinux = xyes ; then |
| # the selinux code creates threads |
| # which requires libpthread even on linux |
| AC_CHECK_FUNC(pthread_create,,[AC_CHECK_LIB(pthread,pthread_create, |
| [SELINUX_THREAD_LIBS="-lpthread"])]) |
| |
| SELINUX_LIBS="-lselinux $SELINUX_THREAD_LIBS" |
| AC_DEFINE(HAVE_SELINUX,1,[SELinux support]) |
| else |
| SELINUX_LIBS= |
| fi |
| |
| # inotify checks |
| if test x$enable_inotify = xno ; then |
| have_inotify=no; |
| else |
| AC_CHECK_HEADERS(sys/inotify.h, have_inotify=yes, have_inotify=no) |
| fi |
| |
| dnl check if inotify backend is enabled |
| if test x$have_inotify = xyes; then |
| AC_DEFINE(DBUS_BUS_ENABLE_INOTIFY,1,[Use inotify]) |
| AC_CHECK_FUNCS(inotify_init1) |
| fi |
| |
| AM_CONDITIONAL(DBUS_BUS_ENABLE_INOTIFY, test x$have_inotify = xyes) |
| |
| # dnotify checks |
| if test x$enable_dnotify = xno ; then |
| have_dnotify=no; |
| else |
| if test x$have_inotify = xno -a x$host_os = xlinux-gnu -o x$host_os = xlinux; then |
| have_dnotify=yes; |
| else |
| have_dnotify=no; |
| fi |
| fi |
| |
| dnl check if dnotify backend is enabled |
| if test x$have_dnotify = xyes; then |
| AC_DEFINE(DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX,1,[Use dnotify on Linux]) |
| fi |
| |
| AM_CONDITIONAL(DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX, test x$have_dnotify = xyes) |
| |
| # kqueue checks |
| if test x$enable_kqueue = xno ; then |
| have_kqueue=no |
| else |
| have_kqueue=yes |
| AC_CHECK_HEADER(sys/event.h, , have_kqueue=no) |
| AC_CHECK_FUNC(kqueue, , have_kqueue=no) |
| |
| if test x$enable_kqueue = xyes -a x$have_kqueue = xno; then |
| AC_MSG_ERROR(kqueue support explicitly enabled but not available) |
| fi |
| fi |
| |
| dnl check if kqueue backend is enabled |
| if test x$have_kqueue = xyes; then |
| AC_DEFINE(DBUS_BUS_ENABLE_KQUEUE,1,[Use kqueue]) |
| fi |
| |
| AM_CONDITIONAL(DBUS_BUS_ENABLE_KQUEUE, test x$have_kqueue = xyes) |
| |
| dnl console owner file |
| if test x$enable_console_owner_file = xno ; then |
| have_console_owner_file=no; |
| else |
| case $host_os in |
| solaris*) |
| have_console_owner_file=yes; |
| AC_DEFINE(HAVE_CONSOLE_OWNER_FILE,1,[Have console owner file]) |
| ;; |
| *) |
| have_console_owner_file=no;; |
| esac |
| fi |
| |
| AM_CONDITIONAL(HAVE_CONSOLE_OWNER_FILE, test x$have_console_owner_file = xyes) |
| |
| # libaudit detection |
| if test x$enable_libaudit = xno ; then |
| have_libaudit=no; |
| else |
| # See if we have audit daemon & capabilities library |
| AC_CHECK_LIB(audit, audit_log_user_avc_message, |
| have_libaudit=yes, have_libaudit=no) |
| if test x$have_libaudit = xyes ; then |
| AC_CHECK_LIB(cap-ng, capng_clear, |
| have_libaudit=yes, have_libaudit=no) |
| fi |
| fi |
| |
| AM_CONDITIONAL(HAVE_LIBAUDIT, test x$have_libaudit = xyes) |
| |
| if test x$have_libaudit = xyes ; then |
| SELINUX_LIBS="$SELINUX_LIBS -laudit -lcap-ng" |
| AC_DEFINE(HAVE_LIBAUDIT,1,[audit daemon SELinux support]) |
| fi |
| |
| # Check for ADT API |
| AC_MSG_CHECKING(for ADT API) |
| AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ |
| #include <bsm/adt.h> |
| adt_user_context = ADT_USER; |
| ]], [[]])], [ check_adt_audit=yes ], [ check_adt_audit=no ]) |
| |
| if test ${check_adt_audit} = yes |
| then |
| AC_DEFINE([HAVE_ADT], [], [Adt audit API]) |
| ADT_LIBS="-lbsm" |
| LIBS="-lbsm $LIBS" |
| AC_MSG_RESULT(yes) |
| else |
| AC_MSG_RESULT(no) |
| fi |
| |
| # Check for SCM_RIGHTS |
| AC_MSG_CHECKING([for SCM_RIGHTS]) |
| AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ |
| #include <sys/socket.h> |
| #include <sys/un.h> |
| static int x = SCM_RIGHTS; |
| ]], [[]])], |
| [ AC_MSG_RESULT([supported]) |
| AC_DEFINE([HAVE_UNIX_FD_PASSING], [1], [Supports sending UNIX file descriptors]) ], |
| [ AC_MSG_RESULT([not supported]) ]) |
| |
| NETWORK_libs= |
| if test x$dbus_win = xyes ; then |
| if test x$dbus_wince = xyes ; then |
| NETWORK_libs="-lws2" |
| else |
| NETWORK_libs="-lws2_32" |
| fi |
| fi |
| |
| #### Set up final flags |
| DBUS_CLIENT_CFLAGS= |
| DBUS_CLIENT_LIBS="$THREAD_LIBS $NETWORK_libs" |
| AC_SUBST(DBUS_CLIENT_CFLAGS) |
| AC_SUBST(DBUS_CLIENT_LIBS) |
| |
| DBUS_BUS_CFLAGS="$XML_CFLAGS" |
| DBUS_BUS_LIBS="$XML_LIBS $SELINUX_LIBS $INTLLIBS $THREAD_LIBS $ADT_LIBS $NETWORK_libs" |
| AC_SUBST(DBUS_BUS_CFLAGS) |
| AC_SUBST(DBUS_BUS_LIBS) |
| |
| DBUS_LAUNCHER_CFLAGS="$XML_CFLAGS" |
| DBUS_LAUNCHER_LIBS="$XML_LIBS $THREAD_LIBS $NETWORK_libs" |
| AC_SUBST(DBUS_LAUNCHER_CFLAGS) |
| AC_SUBST(DBUS_LAUNCHER_LIBS) |
| |
| DBUS_TEST_CFLAGS= |
| DBUS_TEST_LIBS="$THREAD_LIBS $NETWORK_libs" |
| AC_SUBST(DBUS_TEST_CFLAGS) |
| AC_SUBST(DBUS_TEST_LIBS) |
| |
| ### X11 detection |
| if test x$dbus_win = xyes ; then |
| enable_x11=no |
| else |
| AC_PATH_XTRA |
| |
| ## for now enable_x11 just tracks have_x11, |
| ## there's no --enable-x11 |
| if test x$no_x = xyes ; then |
| have_x11=no |
| enable_x11=no |
| else |
| have_x11=yes |
| enable_x11=yes |
| fi |
| |
| if test x$enable_x11 = xyes ; then |
| AC_DEFINE(DBUS_BUILD_X11,1,[Build X11-dependent code]) |
| DBUS_X_LIBS="$X_LIBS $X_PRE_LIBS -lX11 $X_EXTRA_LIBS" |
| DBUS_X_CFLAGS="$X_CFLAGS" |
| else |
| DBUS_X_LIBS= |
| DBUS_X_CFLAGS= |
| fi |
| |
| AC_SUBST(DBUS_X_CFLAGS) |
| AC_SUBST(DBUS_X_LIBS) |
| fi |
| |
| |
| #### gcc warning flags |
| |
| cc_supports_flag() { |
| AC_MSG_CHECKING(whether $CC supports "$@") |
| Cfile=/tmp/foo${$} |
| touch ${Cfile}.c |
| $CC -c "$@" ${Cfile}.c -o ${Cfile}.o >/dev/null 2>&1 |
| rc=$? |
| rm -f ${Cfile}.c ${Cfile}.o |
| case $rc in |
| 0) AC_MSG_RESULT(yes);; |
| *) AC_MSG_RESULT(no);; |
| esac |
| return $rc |
| } |
| |
| ld_supports_flag() { |
| AC_MSG_CHECKING([whether $LD supports "$@"]) |
| AC_TRY_LINK([ |
| int one(void) { return 1; } |
| int two(void) { return 2; } |
| ], [ two(); ] , [_ac_ld_flag_supported=yes], [_ac_ld_flag_supported=no]) |
| |
| if test "$_ac_ld_flag_supported" = "yes"; then |
| rm -f conftest.c |
| touch conftest.c |
| if $CC -c conftest.c; then |
| ld_out=`$LD $@ -o conftest conftest.o 2>&1` |
| ld_ret=$? |
| if test $ld_ret -ne 0 ; then |
| _ac_ld_flag_supported=no |
| elif echo "$ld_out" | egrep 'option ignored|^usage:|unrecognized option|illegal option' >/dev/null ; then |
| _ac_ld_flag_supported=no |
| fi |
| fi |
| rm -f conftest.c conftest.o conftest |
| fi |
| |
| AC_MSG_RESULT($_ac_ld_flag_supported) |
| if test "$_ac_ld_flag_supported" = "yes" ; then |
| return 0 |
| else |
| return 1 |
| fi |
| } |
| |
| # Don't bother with -Werror on Windows for now, too many warnings |
| if test x$dbus_win != xyes -a x$dbus_cygwin != xyes -a x$USE_MAINTAINER_MODE = xyes; then |
| if cc_supports_flag "-Werror"; then |
| CFLAGS="$CFLAGS -Werror" |
| fi |
| fi |
| |
| if test "x$GCC" = "xyes"; then |
| changequote(,)dnl |
| case " $CFLAGS " in |
| *[\ \ ]-Wall[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -Wall" ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-Wchar-subscripts[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -Wchar-subscripts" ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-Wmissing-declarations[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -Wmissing-declarations" ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-Wmissing-prototypes[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -Wmissing-prototypes" ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-Wnested-externs[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -Wnested-externs" ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-Wpointer-arith[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -Wpointer-arith" ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-Wcast-align[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -Wcast-align" ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-Wfloat-equal[\ \ ]*) ;; |
| *) if cc_supports_flag -Wfloat-equals; then |
| CFLAGS="$CFLAGS -Wfloat-equal" |
| fi |
| ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-Wdeclaration-after-statement[\ \ ]*) ;; |
| *) if cc_supports_flag -Wdeclaration-after-statement; then |
| CFLAGS="$CFLAGS -Wdeclaration-after-statement" |
| fi |
| ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-fno-common[\ \ ]*) ;; |
| *) if cc_supports_flag -fno-common; then |
| CFLAGS="$CFLAGS -fno-common" |
| fi |
| ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-fPIC[\ \ ]*) ;; |
| *) if test x$dbus_win = xno && cc_supports_flag -fPIC; then |
| PIC_CFLAGS="-fPIC" |
| if ld_supports_flag -z,relro; then |
| PIC_LDFLAGS="-Wl,-z,relro" |
| fi |
| fi |
| ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-fPIE[\ \ ]*) ;; |
| *) if test x$dbus_win = xno && cc_supports_flag -fPIE; then |
| PIE_CFLAGS="-fPIE" |
| if ld_supports_flag -z,relro; then |
| PIE_LDFLAGS="-pie -Wl,-z,relro" |
| else |
| PIE_LDFLAGS="-pie" |
| fi |
| fi |
| ;; |
| esac |
| |
| ### Disabled warnings, and compiler flag overrides |
| |
| # Let's just ignore unused for now |
| case " $CFLAGS " in |
| *[\ \ ]-Wno-unused[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -Wno-unused" ;; |
| esac |
| |
| # This group is for warnings we currently don't pass. |
| # We would like to, however. Please fix. |
| |
| # http://bugs.freedesktop.org/show_bug.cgi?id=17433 |
| case " $CFLAGS " in |
| *[\ \ ]-Wno-sign-compare[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -Wno-sign-compare" ;; |
| esac |
| case " $CFLAGS " in |
| *[\ \ ]-Wno-pointer-sign[\ \ ]*) ;; |
| *) if cc_supports_flag -Wno-pointer-sign; then |
| CFLAGS="$CFLAGS -Wno-pointer-sign" |
| fi |
| ;; |
| esac |
| |
| # This one is special - it's not a warning override. |
| # http://bugs.freedesktop.org/show_bug.cgi?id=10599 |
| case " $CFLAGS " in |
| *[\ \ ]-fno-strict-aliasing[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -fno-strict-aliasing" ;; |
| esac |
| ### End disabled warnings |
| |
| if test "x$enable_ansi" = "xyes"; then |
| case " $CFLAGS " in |
| *[\ \ ]-ansi[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -ansi" ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-D_POSIX_C_SOURCE*) ;; |
| *) CFLAGS="$CFLAGS -D_POSIX_C_SOURCE=199309L" ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-D_BSD_SOURCE[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -D_BSD_SOURCE" ;; |
| esac |
| |
| case " $CFLAGS " in |
| *[\ \ ]-pedantic[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -pedantic" ;; |
| esac |
| fi |
| if test x$enable_gcov = xyes; then |
| case " $CFLAGS " in |
| *[\ \ ]-fprofile-arcs[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -fprofile-arcs" ;; |
| esac |
| case " $CFLAGS " in |
| *[\ \ ]-ftest-coverage[\ \ ]*) ;; |
| *) CFLAGS="$CFLAGS -ftest-coverage" ;; |
| esac |
| |
| ## remove optimization |
| CFLAGS=`echo "$CFLAGS" | sed -e 's/-O[0-9]*//g'` |
| fi |
| changequote([,])dnl |
| else |
| if test x$enable_gcov = xyes; then |
| AC_MSG_ERROR([--enable-gcov can only be used with gcc]) |
| fi |
| fi |
| |
| AC_SUBST(PIC_CFLAGS) |
| AC_SUBST(PIC_LDFLAGS) |
| AC_SUBST(PIE_CFLAGS) |
| AC_SUBST(PIE_LDFLAGS) |
| |
| if ld_supports_flag --gc-sections; then |
| SECTION_LDFLAGS="-Wl,--gc-sections $SECTION_LDFLAGS" |
| CFLAGS="-ffunction-sections -fdata-sections $CFLAGS" |
| fi |
| AC_SUBST(SECTION_FLAGS) |
| AC_SUBST(SECTION_LDFLAGS) |
| AC_MSG_RESULT($ac_gcsections) |
| |
| # Add -D_POSIX_PTHREAD_SEMANTICS if on Solaris |
| # |
| case $host_os in |
| solaris*) |
| CFLAGS="$CFLAGS -D_POSIX_PTHREAD_SEMANTICS" ;; |
| esac |
| |
| changequote(,)dnl |
| # compress spaces in flags |
| CFLAGS=`echo "$CFLAGS" | sed -e 's/ +/ /g'` |
| CXXFLAGS=`echo "$CXXFLAGS" | sed -e 's/ +/ /g'` |
| CPPFLAGS=`echo "$CPPFLAGS" | sed -e 's/ +/ /g'` |
| changequote([,])dnl |
| |
| ### Doxygen Documentation |
| |
| AC_PATH_PROG(DOXYGEN, doxygen, no) |
| |
| AC_MSG_CHECKING([whether to build Doxygen documentation]) |
| |
| if test x$DOXYGEN = xno ; then |
| have_doxygen=no |
| else |
| have_doxygen=yes |
| fi |
| |
| if test x$enable_doxygen_docs = xauto ; then |
| if test x$have_doxygen = xno ; then |
| enable_doxygen_docs=no |
| else |
| enable_doxygen_docs=yes |
| fi |
| fi |
| |
| if test x$enable_doxygen_docs = xyes; then |
| if test x$have_doxygen = xno; then |
| AC_MSG_ERROR([Building Doxygen docs explicitly required, but Doxygen not found]) |
| fi |
| fi |
| |
| AM_CONDITIONAL(DBUS_DOXYGEN_DOCS_ENABLED, test x$enable_doxygen_docs = xyes) |
| AC_MSG_RESULT(yes) |
| |
| ### XML Documentation |
| |
| AC_PATH_PROG(XMLTO, xmlto, no) |
| |
| AC_MSG_CHECKING([whether to build XML documentation]) |
| |
| if test x$XMLTO = xno ; then |
| have_xmlto=no |
| else |
| have_xmlto=yes |
| fi |
| |
| if test x$enable_xml_docs = xauto ; then |
| if test x$have_xmlto = xno ; then |
| enable_xml_docs=no |
| else |
| enable_xml_docs=yes |
| fi |
| fi |
| |
| if test x$enable_xml_docs = xyes; then |
| if test x$have_xmlto = xno; then |
| AC_MSG_ERROR([Building XML docs explicitly required, but xmlto not found]) |
| fi |
| fi |
| |
| AM_CONDITIONAL(DBUS_XML_DOCS_ENABLED, test x$enable_xml_docs = xyes) |
| AC_MSG_RESULT(yes) |
| |
| #### Have to go $localstatedir->$prefix/var->/usr/local/var |
| |
| #### find the actual value for $prefix that we'll end up with |
| ## (I know this is broken and should be done in the Makefile, but |
| ## that's a major pain and almost nobody actually seems to care) |
| AS_AC_EXPAND(EXPANDED_PREFIX, "$prefix") |
| AS_AC_EXPAND(EXPANDED_LOCALSTATEDIR, "$localstatedir") |
| AS_AC_EXPAND(EXPANDED_SYSCONFDIR, "$sysconfdir") |
| AS_AC_EXPAND(EXPANDED_BINDIR, "$bindir") |
| AS_AC_EXPAND(EXPANDED_LIBDIR, "$libdir") |
| AS_AC_EXPAND(EXPANDED_LIBEXECDIR, "$libexecdir") |
| AS_AC_EXPAND(EXPANDED_DATADIR, "$datadir") |
| |
| #### Check our operating system |
| operating_system=unknown |
| if test -f /etc/redhat-release || test -f $EXPANDED_SYSCONFDIR/redhat-release ; then |
| operating_system=redhat |
| fi |
| |
| if test -f /etc/slackware-version || test -f $EXPANDED_SYSCONFDIR/slackware-version ; then |
| operating_system=slackware |
| fi |
| |
| if test -f /usr/bin/cygwin1.dll || test -f $EXPANDED_BINDIR/cygwin1.dll ; then |
| operating_system=cygwin |
| fi |
| |
| #### Sort out init scripts |
| |
| if test x$with_init_scripts = x; then |
| case x$operating_system in |
| xredhat) with_init_scripts=redhat ;; |
| xslackware) with_init_scripts=slackware ;; |
| xcygwin) with_init_scripts=cygwin ;; |
| *) with_init_scripts=none ;; |
| esac |
| fi |
| |
| AM_CONDITIONAL(DBUS_INIT_SCRIPTS_RED_HAT, test x$with_init_scripts = xredhat) |
| AM_CONDITIONAL(DBUS_INIT_SCRIPTS_SLACKWARE, test x$with_init_scripts = xslackware) |
| AM_CONDITIONAL(DBUS_INIT_SCRIPTS_CYGWIN, test x$with_init_scripts = xcygwin) |
| |
| ##### systemd unit files |
| AC_ARG_WITH([systemdsystemunitdir], |
| AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files]), |
| [], [with_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)]) |
| if test "x$with_systemdsystemunitdir" != xno; then |
| AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir]) |
| fi |
| AM_CONDITIONAL(HAVE_SYSTEMD, [test -n "$with_systemdsystemunitdir" -a "x$with_systemdsystemunitdir" != xno ]) |
| |
| ##### Set up location for system bus socket |
| if ! test -z "$with_system_socket"; then |
| DBUS_SYSTEM_SOCKET=$with_system_socket |
| else |
| DBUS_SYSTEM_SOCKET=${EXPANDED_LOCALSTATEDIR}/run/dbus/system_bus_socket |
| fi |
| |
| AC_SUBST(DBUS_SYSTEM_SOCKET) |
| AC_DEFINE_UNQUOTED(DBUS_SYSTEM_SOCKET,"$DBUS_SYSTEM_SOCKET",[The name of the socket the system bus listens on by default]) |
| |
| ## system bus only listens on local domain sockets, and never |
| ## on an abstract socket (so only root can create the socket) |
| DBUS_SYSTEM_BUS_DEFAULT_ADDRESS="unix:path=$DBUS_SYSTEM_SOCKET" |
| AC_SUBST(DBUS_SYSTEM_BUS_DEFAULT_ADDRESS) |
| AC_DEFINE_UNQUOTED(DBUS_SYSTEM_BUS_DEFAULT_ADDRESS, "$DBUS_SYSTEM_BUS_DEFAULT_ADDRESS",[The default D-Bus address of the system bus]) |
| |
| #### Set up the pid file |
| if ! test -z "$with_system_pid_file"; then |
| DBUS_SYSTEM_PID_FILE=$with_system_pid_file |
| elif test x$with_init_scripts = xredhat ; then |
| DBUS_SYSTEM_PID_FILE=${EXPANDED_LOCALSTATEDIR}/run/messagebus.pid |
| else |
| DBUS_SYSTEM_PID_FILE=${EXPANDED_LOCALSTATEDIR}/run/dbus/pid |
| fi |
| |
| AC_SUBST(DBUS_SYSTEM_PID_FILE) |
| |
| #### Directory to check for console ownership |
| if ! test -z "$with_console_auth_dir"; then |
| DBUS_CONSOLE_AUTH_DIR=$with_console_auth_dir |
| else |
| DBUS_CONSOLE_AUTH_DIR=/var/run/console/ |
| fi |
| |
| AC_SUBST(DBUS_CONSOLE_AUTH_DIR) |
| AC_DEFINE_UNQUOTED(DBUS_CONSOLE_AUTH_DIR, "$DBUS_CONSOLE_AUTH_DIR", [Directory to check for console ownerhip]) |
| |
| #### File to check for console ownership |
| if test x$have_console_owner_file = xyes; then |
| if ! test -z "$with_console_owner_file"; then |
| DBUS_CONSOLE_OWNER_FILE=$with_console_owner_file |
| else |
| DBUS_CONSOLE_OWNER_FILE=/dev/console |
| fi |
| else |
| DBUS_CONSOLE_OWNER_FILE= |
| fi |
| |
| AC_SUBST(DBUS_CONSOLE_OWNER_FILE) |
| AC_DEFINE_UNQUOTED(DBUS_CONSOLE_OWNER_FILE, "$DBUS_CONSOLE_OWNER_FILE", [File to check for console ownerhip]) |
| |
| #### User to start the system bus as |
| if test -z "$with_dbus_user" ; then |
| DBUS_USER=messagebus |
| else |
| DBUS_USER=$with_dbus_user |
| fi |
| AC_SUBST(DBUS_USER) |
| AC_DEFINE_UNQUOTED(DBUS_USER,"$DBUS_USER", [User for running the system BUS daemon]) |
| |
| #### Prefix to install into |
| DBUS_PREFIX=$EXPANDED_PREFIX |
| AC_SUBST(DBUS_PREFIX) |
| AC_DEFINE_UNQUOTED(DBUS_PREFIX,"$DBUS_PREFIX", [Prefix for installing DBUS]) |
| |
| #### Direcotry to install data files into |
| DBUS_DATADIR=$EXPANDED_DATADIR |
| AC_SUBST(DBUS_DATADIR) |
| AC_DEFINE_UNQUOTED(DBUS_DATADIR,"$DBUS_DATADIR", [Directory for installing DBUS data files]) |
| |
| #### Directory to install dbus-daemon |
| if test -z "$with_dbus_daemondir" ; then |
| DBUS_DAEMONDIR=$EXPANDED_BINDIR |
| else |
| DBUS_DAEMONDIR=$with_dbus_daemondir |
| fi |
| AC_SUBST(DBUS_DAEMONDIR) |
| AC_DEFINE_UNQUOTED(DBUS_DAEMONDIR,"$DBUS_DAEMONDIR", [Directory for installing the DBUS daemon]) |
| |
| #### Directory to install the other binaries |
| DBUS_BINDIR="$EXPANDED_BINDIR" |
| AC_SUBST(DBUS_BINDIR) |
| AC_DEFINE_UNQUOTED(DBUS_BINDIR,"$DBUS_BINDIR", [Directory for installing the binaries]) |
| |
| #### Directory to install the libexec binaries |
| DBUS_LIBEXECDIR="$EXPANDED_LIBEXECDIR" |
| AC_SUBST(DBUS_LIBEXECDIR) |
| AC_DEFINE_UNQUOTED(DBUS_LIBEXECDIR,"$DBUS_LIBEXECDIR", [Directory for installing the libexec binaries]) |
| |
| #### Tell tests where to find certain stuff in builddir |
| |
| DBUS_PWD=`pwd` |
| # Useful in a cross-compilation environment, where the tests are run on the host system. |
| AC_ARG_WITH(dbus-test-dir, AS_HELP_STRING([--with-dbus-test-dir=[dirname]],[path where the tests tools are available]), |
| DBUS_PWD=$withval) |
| AC_DEFUN([TEST_PATH], [ |
| TEST_$1=${DBUS_PWD}/test/$2 |
| AC_DEFINE_UNQUOTED(TEST_$1, "$TEST_$1", |
| [Full path to test file test/$2 in builddir]) |
| AC_SUBST(TEST_$1) |
| ]) |
| AC_DEFUN([TEST_PROG], [ |
| TEST_$1=${DBUS_PWD}/test/$2 |
| AC_DEFINE_UNQUOTED(TEST_$1, "$TEST_$1$EXEEXT", |
| [Full path to test file test/$2 in builddir]) |
| AC_SUBST(TEST_$1) |
| ]) |
| |
| TEST_PATH(VALID_SERVICE_DIR, data/valid-service-files) |
| TEST_PATH(INVALID_SERVICE_DIR, data/invalid-service-files) |
| TEST_PATH(VALID_SERVICE_SYSTEM_DIR, data/valid-service-files-system) |
| TEST_PATH(INVALID_SERVICE_SYSTEM_DIR, data/invalid-service-files-system) |
| TEST_PROG(SERVICE_BINARY, test-service) |
| TEST_PROG(SHELL_SERVICE_BINARY, test-shell-service) |
| TEST_PROG(EXIT_BINARY, test-exit) |
| TEST_PROG(SEGFAULT_BINARY, test-segfault) |
| TEST_PROG(SLEEP_FOREVER_BINARY, test-sleep-forever) |
| TEST_PROG(PRIVSERVER_BINARY, name-test/test-privserver) |
| |
| AC_DEFINE_UNQUOTED(TEST_BUS_BINARY, "$DBUS_PWD/bus/dbus-daemon$EXEEXT", |
| [Full path to the daemon in the builddir]) |
| AC_SUBST(TEST_BUS_BINARY) |
| |
| ## Export the non-setuid external helper |
| TEST_LAUNCH_HELPER_BINARY="$DBUS_PWD/bus/dbus-daemon-launch-helper-test$EXEEXT" |
| AC_SUBST(TEST_LAUNCH_HELPER_BINARY) |
| AC_DEFINE_UNQUOTED(DBUS_TEST_LAUNCH_HELPER_BINARY, "$TEST_LAUNCH_HELPER_BINARY", |
| [Full path to the launch helper test program in the builddir]) |
| |
| #### Find socket directories |
| if ! test -z "$TMPDIR" ; then |
| DEFAULT_SOCKET_DIR=$TMPDIR |
| elif ! test -z "$TEMP" ; then |
| DEFAULT_SOCKET_DIR=$TEMP |
| elif ! test -z "$TMP" ; then |
| DEFAULT_SOCKET_DIR=$TMP |
| else |
| DEFAULT_SOCKET_DIR=/tmp |
| fi |
| |
| if ! test -z "$with_test_socket_dir" ; then |
| TEST_SOCKET_DIR="$with_test_socket_dir" |
| else |
| TEST_SOCKET_DIR=$DEFAULT_SOCKET_DIR |
| fi |
| AC_SUBST(TEST_SOCKET_DIR) |
| AC_DEFINE_UNQUOTED(DBUS_TEST_SOCKET_DIR, "$TEST_SOCKET_DIR", [Where to put test sockets]) |
| |
| if ! test -z "$with_session_socket_dir" ; then |
| DBUS_SESSION_SOCKET_DIR="$with_session_socket_dir" |
| else |
| DBUS_SESSION_SOCKET_DIR=$DEFAULT_SOCKET_DIR |
| fi |
| AC_DEFINE_UNQUOTED(DBUS_SESSION_SOCKET_DIR, "$DBUS_SESSION_SOCKET_DIR", [Where per-session bus puts its sockets]) |
| AC_SUBST(DBUS_SESSION_SOCKET_DIR) |
| |
| if test x$dbus_win = xyes; then |
| DBUS_SESSION_BUS_DEFAULT_ADDRESS="nonce-tcp:" |
| else |
| DBUS_SESSION_BUS_DEFAULT_ADDRESS="unix:tmpdir=$DBUS_SESSION_SOCKET_DIR" |
| fi |
| AC_SUBST(DBUS_SESSION_BUS_DEFAULT_ADDRESS) |
| |
| # darwin needs this to initialize the environment |
| AC_CHECK_HEADERS(crt_externs.h) |
| AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) |
| AH_VERBATIM(_DARWIN_ENVIRON, |
| [ |
| #if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) |
| # include <sys/time.h> |
| # include <crt_externs.h> |
| # define environ (*_NSGetEnviron()) |
| #endif |
| ]) |
| |
| AC_OUTPUT([ |
| Doxyfile |
| dbus/versioninfo.rc |
| dbus/dbus-arch-deps.h |
| bus/system.conf |
| bus/session.conf |
| bus/messagebus |
| bus/messagebus-config |
| bus/rc.messagebus |
| bus/dbus-daemon.1 |
| bus/dbus.service |
| bus/dbus.socket |
| Makefile |
| dbus/Makefile |
| bus/Makefile |
| tools/Makefile |
| test/Makefile |
| test/name-test/Makefile |
| doc/Makefile |
| dbus-1.pc |
| test/data/valid-config-files/debug-allow-all.conf |
| test/data/valid-config-files/debug-allow-all-sha1.conf |
| test/data/valid-config-files-system/debug-allow-all-pass.conf |
| test/data/valid-config-files-system/debug-allow-all-fail.conf |
| test/data/valid-service-files/org.freedesktop.DBus.TestSuite.PrivServer.service |
| test/data/valid-service-files/org.freedesktop.DBus.TestSuiteEchoService.service |
| test/data/valid-service-files/org.freedesktop.DBus.TestSuiteForkingEchoService.service |
| test/data/valid-service-files/org.freedesktop.DBus.TestSuiteSegfaultService.service |
| test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service |
| test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service |
| test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteEchoService.service |
| test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteSegfaultService.service |
| test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service |
| test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service |
| test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoExec.service |
| test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoUser.service |
| test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoService.service |
| ]) |
| |
| dnl ========================================================================== |
| echo " |
| D-Bus $VERSION |
| ============== |
| |
| prefix: ${EXPANDED_PREFIX} |
| exec_prefix: ${exec_prefix} |
| libdir: ${EXPANDED_LIBDIR} |
| libexecdir: ${EXPANDED_LIBEXECDIR} |
| bindir: ${EXPANDED_BINDIR} |
| sysconfdir: ${EXPANDED_SYSCONFDIR} |
| localstatedir: ${EXPANDED_LOCALSTATEDIR} |
| datadir: ${EXPANDED_DATADIR} |
| source code location: ${srcdir} |
| compiler: ${CC} |
| cflags: ${CFLAGS} |
| cppflags: ${CPPFLAGS} |
| cxxflags: ${CXXFLAGS} |
| 64-bit int: ${DBUS_INT64_TYPE} |
| 32-bit int: ${DBUS_INT32_TYPE} |
| 16-bit int: ${DBUS_INT16_TYPE} |
| Doxygen: ${DOXYGEN} |
| xmlto: ${XMLTO}" |
| |
| echo " |
| Maintainer mode: ${USE_MAINTAINER_MODE} |
| gcc coverage profiling: ${enable_gcov} |
| Building unit tests: ${enable_tests} |
| Building verbose mode: ${enable_verbose_mode} |
| Building assertions: ${enable_asserts} |
| Building checks: ${enable_checks} |
| Building SELinux support: ${have_selinux} |
| Building inotify support: ${have_inotify} |
| Building dnotify support: ${have_dnotify} |
| Building kqueue support: ${have_kqueue} |
| Building X11 code: ${enable_x11} |
| Building Doxygen docs: ${enable_doxygen_docs} |
| Building XML docs: ${enable_xml_docs} |
| Building cache support: ${enable_userdb_cache} |
| Gettext libs (empty OK): ${INTLLIBS} |
| Using XML parser: ${with_xml} |
| Init scripts style: ${with_init_scripts} |
| Abstract socket names: ${ac_cv_have_abstract_sockets} |
| System bus socket: ${DBUS_SYSTEM_SOCKET} |
| System bus address: ${DBUS_SYSTEM_BUS_DEFAULT_ADDRESS} |
| System bus PID file: ${DBUS_SYSTEM_PID_FILE} |
| Session bus address: ${DBUS_SESSION_BUS_DEFAULT_ADDRESS} |
| Console auth dir: ${DBUS_CONSOLE_AUTH_DIR} |
| Console owner file: ${have_console_owner_file} |
| Console owner file path: ${DBUS_CONSOLE_OWNER_FILE} |
| System bus user: ${DBUS_USER} |
| Session bus services dir: ${EXPANDED_DATADIR}/dbus-1/services |
| 'make check' socket dir: ${TEST_SOCKET_DIR} |
| " |
| |
| if test x$enable_tests = xyes; then |
| echo "NOTE: building with unit tests increases the size of the installed library and renders it insecure." |
| fi |
| if test x$enable_tests = xyes -a x$enable_asserts = xno; then |
| echo "NOTE: building with unit tests but without assertions means tests may not properly report failures (this configuration is only useful when doing something like profiling the tests)" |
| fi |
| if test x$enable_gcov = xyes; then |
| echo "NOTE: building with coverage profiling is definitely for developers only." |
| fi |
| if test x$enable_verbose_mode = xyes; then |
| echo "NOTE: building with verbose mode increases library size, may slightly increase security risk, and decreases performance." |
| fi |
| if test x$enable_asserts = xyes; then |
| echo "NOTE: building with assertions increases library size and decreases performance." |
| fi |
| if test x$enable_checks = xno; then |
| echo "NOTE: building without checks for arguments passed to public API makes it harder to debug apps using D-Bus, but will slightly decrease D-Bus library size and _very_ slightly improve performance." |
| fi |
| if test x$dbus_use_libxml = xtrue; then |
| echo |
| echo "WARNING: You have chosen to use libxml as your xml parser however this code path is not maintained by the D-Bus developers and if it breaks you get to keep the pieces. If you have selected this option in err please reconfigure with expat (e.g. --with-xml=expat)." |
| fi |