| |
| configdir=$(sysconfdir)/dbus-1 |
| |
| INCLUDES=-I$(top_srcdir) $(DBUS_BUS_CFLAGS) @PIE_CFLAGS@ \ |
| -DDBUS_SYSTEM_CONFIG_FILE=\""$(configdir)/system.conf"\" \ |
| -DDBUS_COMPILATION |
| |
| EFENCE= |
| |
| CONFIG_IN_FILES= \ |
| session.conf.in \ |
| system.conf.in |
| |
| config_DATA= \ |
| session.conf \ |
| system.conf |
| |
| if DBUS_USE_LIBXML |
| XML_SOURCES=config-loader-libxml.c |
| endif |
| if DBUS_USE_EXPAT |
| XML_SOURCES=config-loader-expat.c |
| endif |
| |
| if DBUS_BUS_ENABLE_KQUEUE |
| DIR_WATCH_SOURCE=dir-watch-kqueue.c |
| else |
| if DBUS_BUS_ENABLE_INOTIFY |
| DIR_WATCH_SOURCE=dir-watch-inotify.c |
| else |
| if DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX |
| DIR_WATCH_SOURCE=dir-watch-dnotify.c |
| else |
| DIR_WATCH_SOURCE=dir-watch-default.c |
| endif |
| endif |
| endif |
| |
| BUS_SOURCES= \ |
| activation.c \ |
| activation.h \ |
| activation-exit-codes.h \ |
| bus.c \ |
| bus.h \ |
| config-parser.c \ |
| config-parser.h \ |
| config-parser-common.c \ |
| config-parser-common.h \ |
| connection.c \ |
| connection.h \ |
| desktop-file.c \ |
| desktop-file.h \ |
| $(DIR_WATCH_SOURCE) \ |
| dir-watch.h \ |
| dispatch.c \ |
| dispatch.h \ |
| driver.c \ |
| driver.h \ |
| expirelist.c \ |
| expirelist.h \ |
| policy.c \ |
| policy.h \ |
| selinux.h \ |
| selinux.c \ |
| services.c \ |
| services.h \ |
| signals.c \ |
| signals.h \ |
| test.c \ |
| test.h \ |
| utils.c \ |
| utils.h \ |
| $(XML_SOURCES) |
| |
| dbus_daemon_SOURCES= \ |
| $(BUS_SOURCES) \ |
| main.c |
| |
| dbus_daemon_CPPFLAGS = -DDBUS_STATIC_BUILD |
| dbus_daemon_LDADD= \ |
| $(top_builddir)/dbus/libdbus-internal.la \ |
| $(EFENCE) \ |
| $(DBUS_BUS_LIBS) |
| |
| dbus_daemon_LDFLAGS=@R_DYNAMIC_LDFLAG@ @SECTION_LDFLAGS@ @PIE_LDFLAGS@ |
| |
| LAUNCH_HELPER_SOURCES= \ |
| $(XML_SOURCES) \ |
| config-parser-common.c \ |
| config-parser-common.h \ |
| config-parser-trivial.c \ |
| config-parser-trivial.h \ |
| desktop-file.c \ |
| desktop-file.h \ |
| utils.c \ |
| utils.h \ |
| activation-exit-codes.h \ |
| activation-helper.h \ |
| activation-helper.c |
| |
| ## This is the installed launch helper with the setuid checks |
| dbus_daemon_launch_helper_SOURCES= \ |
| activation-helper-bin.c \ |
| $(LAUNCH_HELPER_SOURCES) |
| |
| dbus_daemon_launch_helper_CPPFLAGS = -DDBUS_STATIC_BUILD |
| dbus_daemon_launch_helper_LDADD= \ |
| $(top_builddir)/dbus/libdbus-internal.la \ |
| $(DBUS_LAUNCHER_LIBS) |
| |
| dbus_daemon_launch_helper_LDFLAGS=@R_DYNAMIC_LDFLAG@ @SECTION_LDFLAGS@ |
| |
| ## we build another binary so we can do the launch testing without root privs. |
| ## DO NOT INSTALL THIS FILE |
| dbus_daemon_launch_helper_test_SOURCES= \ |
| activation-helper-bin.c \ |
| $(LAUNCH_HELPER_SOURCES) |
| |
| dbus_daemon_launch_helper_test_LDADD= \ |
| $(top_builddir)/dbus/libdbus-internal.la \ |
| $(DBUS_LAUNCHER_LIBS) |
| |
| dbus_daemon_launch_helper_test_LDFLAGS=@R_DYNAMIC_LDFLAG@ @SECTION_LDFLAGS@ |
| dbus_daemon_launch_helper_test_CPPFLAGS= -DDBUS_STATIC_BUILD \ |
| -DACTIVATION_LAUNCHER_TEST |
| |
| ## we build yet another binary so we can do the OOM tests |
| ## DO NOT INSTALL THIS FILE |
| bus_test_launch_helper_SOURCES= \ |
| test-launch-helper.c \ |
| $(LAUNCH_HELPER_SOURCES) |
| |
| bus_test_launch_helper_LDADD= \ |
| $(top_builddir)/dbus/libdbus-internal.la \ |
| $(DBUS_LAUNCHER_LIBS) |
| |
| bus_test_launch_helper_LDFLAGS=@R_DYNAMIC_LDFLAG@ @SECTION_LDFLAGS@ |
| bus_test_launch_helper_CPPFLAGS= -DDBUS_STATIC_BUILD \ |
| -DACTIVATION_LAUNCHER_TEST \ |
| -DACTIVATION_LAUNCHER_DO_OOM |
| |
| extra_tests= |
| extra_noinst_programs= |
| extra_inst_programs= |
| if DBUS_UNIX |
| extra_tests+=bus-test-launch-helper |
| extra_noinst_programs+=dbus-daemon-launch-helper dbus-daemon-launch-helper-test dbus-daemon |
| endif |
| if DBUS_WIN |
| extra_inst_programs+=dbus-daemon |
| endif |
| |
| ## note that TESTS has special meaning (stuff to use in make check) |
| ## so if adding tests not to be run in make check, don't add them to |
| ## TESTS |
| if DBUS_BUILD_TESTS |
| TESTS_ENVIRONMENT=DBUS_TEST_DATA=$(top_builddir)/test/data DBUS_TEST_HOMEDIR=$(top_builddir)/dbus DBUS_FATAL_WARNINGS=1 DBUS_BLOCK_ON_ABORT=1 |
| TESTS=bus-test bus-test-system $(extra_tests) |
| else |
| TESTS= |
| endif |
| |
| ## we use noinst_PROGRAMS not check_PROGRAMS so that we build |
| ## even when not doing "make check" |
| noinst_PROGRAMS=$(TESTS) $(extra_noinst_programs) |
| bin_PROGRAMS=$(extra_inst_programs) |
| |
| bus_test_system_SOURCES= \ |
| $(XML_SOURCES) \ |
| config-parser-common.c \ |
| config-parser-common.h \ |
| config-parser-trivial.c \ |
| config-parser-trivial.h \ |
| utils.c \ |
| utils.h \ |
| test-system.c |
| |
| bus_test_system_CPPFLAGS = -DDBUS_STATIC_BUILD |
| bus_test_system_LDADD=$(top_builddir)/dbus/libdbus-internal.la $(DBUS_BUS_LIBS) |
| bus_test_system_LDFLAGS=@R_DYNAMIC_LDFLAG@ |
| |
| bus_test_SOURCES= \ |
| $(BUS_SOURCES) \ |
| test-main.c |
| |
| bus_test_CPPFLAGS = -DDBUS_STATIC_BUILD |
| bus_test_LDADD=$(top_builddir)/dbus/libdbus-internal.la $(DBUS_BUS_LIBS) |
| bus_test_LDFLAGS=@R_DYNAMIC_LDFLAG@ |
| |
| ## mop up the gcov files |
| clean-local: |
| /bin/rm *.bb *.bbg *.da *.gcov || true |
| |
| uninstall-hook: |
| rm -f $(DESTDIR)$(DBUS_DAEMONDIR)/dbus-daemon$(EXEEXT) |
| rm -f $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT) |
| |
| install-data-hook: |
| $(mkinstalldirs) $(DESTDIR)$(localstatedir)/run/dbus |
| $(mkinstalldirs) $(DESTDIR)$(configdir)/system.d |
| $(mkinstalldirs) $(DESTDIR)$(configdir)/session.d |
| $(mkinstalldirs) $(DESTDIR)$(datadir)/dbus-1/services |
| $(mkinstalldirs) $(DESTDIR)$(datadir)/dbus-1/system-services |
| if DBUS_UNIX |
| if test '!' -d $(DESTDIR)$(DBUS_DAEMONDIR); then \ |
| $(mkinstalldirs) $(DESTDIR)$(DBUS_DAEMONDIR); \ |
| chmod 755 $(DESTDIR)$(DBUS_DAEMONDIR); \ |
| fi |
| $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) dbus-daemon$(EXEEXT) $(DESTDIR)$(DBUS_DAEMONDIR) |
| $(mkinstalldirs) $(DESTDIR)$(libexecdir)/dbus-1 |
| if test -f dbus-daemon-launch-helper$(EXEEXT) ; then \ |
| $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) dbus-daemon-launch-helper$(EXEEXT) $(DESTDIR)$(libexecdir); \ |
| if test `id -u` -eq 0; then \ |
| chown root:$(DBUS_USER) $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \ |
| chmod 4750 $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \ |
| else \ |
| echo "Not installing $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper binary setuid!"; \ |
| echo "You'll need to manually set permissions to root:$(DBUS_USER) and permissions 4750"; \ |
| fi \ |
| fi |
| endif |
| if HAVE_SYSTEMD |
| # Install dbus.socket as default implementation of a D-Bus stack |
| $(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/dbus.target.wants |
| $(LN_S) ../dbus.socket $(DESTDIR)$(systemdsystemunitdir)/dbus.target.wants/dbus.socket |
| # Unconditionally enable D-Bus on systemd installations |
| $(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants |
| $(LN_S) ../dbus.socket $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants/dbus.socket |
| $(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/multi-user.target.wants |
| $(LN_S) ../dbus.service $(DESTDIR)$(systemdsystemunitdir)/multi-user.target.wants/dbus.service |
| endif |
| |
| #### Init scripts fun |
| SCRIPT_IN_FILES=messagebus.in \ |
| messagebus-config.in \ |
| rc.messagebus.in |
| |
| ## Red Hat start |
| if DBUS_INIT_SCRIPTS_RED_HAT |
| |
| initddir=$(sysconfdir)/rc.d/init.d |
| |
| initd_SCRIPTS= \ |
| messagebus |
| |
| endif |
| ## Red Hat end |
| |
| ## Slackware start |
| if DBUS_INIT_SCRIPTS_SLACKWARE |
| |
| initddir=$(sysconfdir)/rc.d/ |
| |
| initd_SCRIPTS= \ |
| rc.messagebus |
| |
| endif |
| ## Slackware end |
| |
| ## Cygwin start |
| if DBUS_INIT_SCRIPTS_CYGWIN |
| |
| bin_SCRIPTS= \ |
| messagebus-config |
| |
| endif |
| ## Cygwin end |
| |
| if HAVE_SYSTEMD |
| SCRIPT_IN_FILES += \ |
| dbus.service.in \ |
| dbus.socket.in |
| |
| systemdsystemunit_DATA = \ |
| dbus.service \ |
| dbus.socket |
| endif |
| |
| MAN_IN_FILES=dbus-daemon.1.in |
| man_MANS = dbus-daemon.1 |
| |
| #### Extra dist |
| |
| EXTRA_DIST=$(CONFIG_IN_FILES) $(SCRIPT_IN_FILES) $(man_MANS) $(MAN_IN_FILES) |