blob: 8cd4586404da7593c85541de22f9899883d9320d [file] [log] [blame]
/* $Id$ */
/*
* Copyright (C) 2008-2011 Teluu Inc. (http://www.teluu.com)
* Copyright (C) 2003-2008 Benny Prijono <benny@prijono.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __PJNATH_ICE_SESSION_H__
#define __PJNATH_ICE_SESSION_H__
/**
* @file ice_session.h
* @brief ICE session management
*/
#include <pjnath/types.h>
#include <pjnath/stun_session.h>
#include <pjnath/errno.h>
#include <pj/sock.h>
#include <pj/timer.h>
PJ_BEGIN_DECL
/**
* @addtogroup PJNATH_ICE_SESSION
* @{
*
* This module describes #pj_ice_sess, a transport independent ICE session,
* part of PJNATH - the Open Source NAT helper library.
*
* \section pj_ice_sess_sec ICE Session
*
* An ICE session, represented by #pj_ice_sess structure, is the lowest
* abstraction of ICE in PJNATH, and it is used to perform and manage
* connectivity checks of transport address candidates <b>within a
* single media stream</b> (note: this differs from what is described
* in ICE draft, where an ICE session manages the whole media sessions
* rather than just a single stream).
*
* The ICE session described here is independent from any transports,
* meaning that the actual network I/O for this session would have to
* be performed by the application, or higher layer abstraction.
* Using this framework, application would give any incoming packets to
* the ICE session, and it would provide the ICE session with a callback
* to send outgoing message.
*
* For higher abstraction of ICE where transport is included, please
* see \ref PJNATH_ICE_STREAM_TRANSPORT.
*
* \subsection pj_ice_sess_using_sec Using The ICE Session
*
* The steps below describe how to use ICE session. Alternatively application
* can use the higher level ICE API, \ref PJNATH_ICE_STREAM_TRANSPORT,
* which has provided the integration of ICE with socket transport.
*
* The steps to use ICE session is similar for both offerer and
* answerer:
* - create ICE session with #pj_ice_sess_create(). Among other things,
* application needs to specify:
* - STUN configuration (pj_stun_config), containing STUN settings
* such as timeout values and the instances of timer heap and
* ioqueue.
* - Session name, useful for identifying this session in the log.
* - Initial ICE role (#pj_ice_sess_role). The role can be changed
* at later time with #pj_ice_sess_change_role(), and ICE session
* can also change its role automatically when it detects role
* conflict.
* - Number of components in the media session.
* - Callback to receive ICE events (#pj_ice_sess_cb)
* - Optional local ICE username and password. If these arguments
* are NULL, they will be generated randomly.
* - Add local candidates for each component, with #pj_ice_sess_add_cand().
* A candidate is represented with #pj_ice_sess_cand structure.
* Each component must be provided with at least one candidate, and
* all components must have the same number of candidates. Failing
* to comply with this will cause failure during pairing process.
* - Create offer to describe local ICE candidates. ICE session does not
* provide a function to create such offer, but application should be
* able to create one since it knows about all components and candidates.
* If application uses \ref PJNATH_ICE_STREAM_TRANSPORT, it can
* enumerate local candidates by calling #pj_ice_strans_enum_cands().
* Application may use #pj_ice_sess_find_default_cand() to let ICE
* session chooses the default transport address to be used in SDP
* c= and m= lines.
* - Send the offer to remote endpoint using signaling such as SIP.
* - Once application has received the answer, it should parse this
* answer, build array of remote candidates, and create check lists by
* calling #pj_ice_sess_create_check_list(). This process is known as
* pairing the candidates, and will result in the creation of check lists.
* - Once checklist has been created, application then can call
* #pj_ice_sess_start_check() to instruct ICE session to start
* performing connectivity checks. The ICE session performs the
* connectivity checks by processing each check in the checklists.
* - Application will be notified about the result of ICE connectivity
* checks via the callback that was given in #pj_ice_sess_create()
* above.
*
* To send data, application calls #pj_ice_sess_send_data(). If ICE
* negotiation has not completed, ICE session would simply drop the data,
* and return error to caller. If ICE negotiation has completed
* successfully, ICE session will in turn call the \a on_tx_pkt
* callback of #pj_ice_sess_cb instance that was previously registered
* in #pj_ice_sess_create() above.
*
* When application receives any packets on the underlying sockets, it
* must call #pj_ice_sess_on_rx_pkt(). The ICE session will inspect the
* packet to decide whether to process it locally (if the packet is a
* STUN message and is part of ICE session) or otherwise pass it back to
* application via \a on_rx_data callback.
*/
/**
* Forward declaration for checklist.
*/
typedef struct pj_ice_sess_checklist pj_ice_sess_checklist;
/**
* This enumeration describes the type of an ICE candidate.
*/
typedef enum pj_ice_cand_type
{
/**
* ICE host candidate. A host candidate represents the actual local
* transport address in the host.
*/
PJ_ICE_CAND_TYPE_HOST,
/**
* ICE server reflexive candidate, which represents the public mapped
* address of the local address, and is obtained by sending STUN
* Binding request from the host candidate to a STUN server.
*/
PJ_ICE_CAND_TYPE_SRFLX,
/**
* ICE peer reflexive candidate, which is the address as seen by peer
* agent during connectivity check.
*/
PJ_ICE_CAND_TYPE_PRFLX,
/**
* ICE relayed candidate, which represents the address allocated in
* TURN server.
*/
PJ_ICE_CAND_TYPE_RELAYED
} pj_ice_cand_type;
/** Forward declaration for pj_ice_sess */
typedef struct pj_ice_sess pj_ice_sess;
/** Forward declaration for pj_ice_sess_check */
typedef struct pj_ice_sess_check pj_ice_sess_check;
/**
* This structure describes ICE component.
* A media stream may require multiple components, each of which has
* to work for the media stream as a whole to work. For media streams
* based on RTP, there are two components per media stream - one for RTP,
* and one for RTCP.
*/
typedef struct pj_ice_sess_comp
{
/**
* Pointer to ICE check with highest priority which connectivity check
* has been successful. The value will be NULL if a no successful check
* has not been found for this component.
*/
pj_ice_sess_check *valid_check;
/**
* Pointer to ICE check with highest priority which connectivity check
* has been successful and it has been nominated. The value may be NULL
* if there is no such check yet.
*/
pj_ice_sess_check *nominated_check;
/**
* The STUN session to be used to send and receive STUN messages for this
* component.
*/
pj_stun_session *stun_sess;
} pj_ice_sess_comp;
/**
* Data structure to be attached to internal message processing.
*/
typedef struct pj_ice_msg_data
{
/** Transport ID for this message */
unsigned transport_id;
/** Flag to indicate whether data.req contains data */
pj_bool_t has_req_data;
/** The data */
union data {
/** Request data */
struct request_data {
pj_ice_sess *ice; /**< ICE session */
pj_ice_sess_checklist *clist; /**< Checklist */
unsigned ckid; /**< Check ID */
} req;
} data;
} pj_ice_msg_data;
/**
* This structure describes an ICE candidate.
* ICE candidate is a transport address that is to be tested by ICE
* procedures in order to determine its suitability for usage for
* receipt of media. Candidates also have properties - their type
* (server reflexive, relayed or host), priority, foundation, and
* base.
*/
typedef struct pj_ice_sess_cand
{
/**
* The candidate type, as described in #pj_ice_cand_type enumeration.
*/
pj_ice_cand_type type;
/**
* Status of this candidate. The value will be PJ_SUCCESS if candidate
* address has been resolved successfully, PJ_EPENDING when the address
* resolution process is in progress, or other value when the address
* resolution has completed with failure.
*/
pj_status_t status;
/**
* The component ID of this candidate. Note that component IDs starts
* with one for RTP and two for RTCP. In other words, it's not zero
* based.
*/
pj_uint8_t comp_id;
/**
* Transport ID to be used to send packets for this candidate.
*/
pj_uint8_t transport_id;
/**
* Local preference value, which typically is 65535.
*/
pj_uint16_t local_pref;
/**
* The foundation string, which is an identifier which value will be
* equivalent for two candidates that are of the same type, share the
* same base, and come from the same STUN server. The foundation is
* used to optimize ICE performance in the Frozen algorithm.
*/
pj_str_t foundation;
/**
* The candidate's priority, a 32-bit unsigned value which value will be
* calculated by the ICE session when a candidate is registered to the
* ICE session.
*/
pj_uint32_t prio;
/**
* IP address of this candidate. For host candidates, this represents
* the local address of the socket. For reflexive candidates, the value
* will be the public address allocated in NAT router for the host
* candidate and as reported in MAPPED-ADDRESS or XOR-MAPPED-ADDRESS
* attribute of STUN Binding request. For relayed candidate, the value
* will be the address allocated in the TURN server by STUN Allocate
* request.
*/
pj_sockaddr addr;
/**
* Base address of this candidate. "Base" refers to the address an agent
* sends from for a particular candidate. For host candidates, the base
* is the same as the host candidate itself. For reflexive candidates,
* the base is the local IP address of the socket. For relayed candidates,
* the base address is the transport address allocated in the TURN server
* for this candidate.
*/
pj_sockaddr base_addr;
/**
* Related address, which is used for informational only and is not used
* in any way by the ICE session.
*/
pj_sockaddr rel_addr;
} pj_ice_sess_cand;
/**
* This enumeration describes the state of ICE check.
*/
typedef enum pj_ice_sess_check_state
{
/**
* A check for this pair hasn't been performed, and it can't
* yet be performed until some other check succeeds, allowing this
* pair to unfreeze and move into the Waiting state.
*/
PJ_ICE_SESS_CHECK_STATE_FROZEN,
/**
* A check has not been performed for this pair, and can be
* performed as soon as it is the highest priority Waiting pair on
* the check list.
*/
PJ_ICE_SESS_CHECK_STATE_WAITING,
/**
* A check has not been performed for this pair, and can be
* performed as soon as it is the highest priority Waiting pair on
* the check list.
*/
PJ_ICE_SESS_CHECK_STATE_IN_PROGRESS,
/**
* A check has not been performed for this pair, and can be
* performed as soon as it is the highest priority Waiting pair on
* the check list.
*/
PJ_ICE_SESS_CHECK_STATE_SUCCEEDED,
/**
* A check for this pair was already done and failed, either
* never producing any response or producing an unrecoverable failure
* response.
*/
PJ_ICE_SESS_CHECK_STATE_FAILED
} pj_ice_sess_check_state;
/**
* This structure describes an ICE connectivity check. An ICE check
* contains a candidate pair, and will involve sending STUN Binding
* Request transaction for the purposes of verifying connectivity.
* A check is sent from the local candidate to the remote candidate
* of a candidate pair.
*/
struct pj_ice_sess_check
{
/**
* Pointer to local candidate entry of this check.
*/
pj_ice_sess_cand *lcand;
/**
* Pointer to remote candidate entry of this check.
*/
pj_ice_sess_cand *rcand;
/**
* Check priority.
*/
pj_timestamp prio;
/**
* Connectivity check state.
*/
pj_ice_sess_check_state state;
/**
* STUN transmit data containing STUN Binding request that was sent
* as part of this check. The value will only be set when this check
* has a pending transaction, and is used to cancel the transaction
* when other check has succeeded.
*/
pj_stun_tx_data *tdata;
/**
* Flag to indicate whether this check is nominated. A nominated check
* contains USE-CANDIDATE attribute in its STUN Binding request.
*/
pj_bool_t nominated;
/**
* When the check failed, this will contain the failure status of the
* STUN transaction.
*/
pj_status_t err_code;
};
/**
* This enumeration describes ICE checklist state.
*/
typedef enum pj_ice_sess_checklist_state
{
/**
* The checklist is not yet running.
*/
PJ_ICE_SESS_CHECKLIST_ST_IDLE,
/**
* In this state, ICE checks are still in progress for this
* media stream.
*/
PJ_ICE_SESS_CHECKLIST_ST_RUNNING,
/**
* In this state, ICE checks have completed for this media stream,
* either successfully or with failure.
*/
PJ_ICE_SESS_CHECKLIST_ST_COMPLETED
} pj_ice_sess_checklist_state;
/**
* This structure represents ICE check list, that is an ordered set of
* candidate pairs that an agent will use to generate checks.
*/
struct pj_ice_sess_checklist
{
/**
* The checklist state.
*/
pj_ice_sess_checklist_state state;
/**
* Number of candidate pairs (checks).
*/
unsigned count;
/**
* Array of candidate pairs (checks).
*/
pj_ice_sess_check checks[PJ_ICE_MAX_CHECKS];
/**
* A timer used to perform periodic check for this checklist.
*/
pj_timer_entry timer;
};
/**
* This structure contains callbacks that will be called by the ICE
* session.
*/
typedef struct pj_ice_sess_cb
{
/**
* An optional callback that will be called by the ICE session when
* ICE negotiation has completed, successfully or with failure.
*
* @param ice The ICE session.
* @param status Will contain PJ_SUCCESS if ICE negotiation is
* successful, or some error code.
*/
void (*on_ice_complete)(pj_ice_sess *ice, pj_status_t status);
/**
* A mandatory callback which will be called by the ICE session when
* it needs to send outgoing STUN packet.
*
* @param ice The ICE session.
* @param comp_id ICE component ID.
* @param transport_id Transport ID.
* @param pkt The STUN packet.
* @param size The size of the packet.
* @param dst_addr Packet destination address.
* @param dst_addr_len Length of destination address.
*/
pj_status_t (*on_tx_pkt)(pj_ice_sess *ice, unsigned comp_id,
unsigned transport_id,
const void *pkt, pj_size_t size,
const pj_sockaddr_t *dst_addr,
unsigned dst_addr_len);
/**
* A mandatory callback which will be called by the ICE session when
* it receives packet which is not part of ICE negotiation.
*
* @param ice The ICE session.
* @param comp_id ICE component ID.
* @param transport_id Transport ID.
* @param pkt The whole packet.
* @param size Size of the packet.
* @param src_addr Source address where this packet was received
* from.
* @param src_addr_len The length of source address.
*/
void (*on_rx_data)(pj_ice_sess *ice, unsigned comp_id,
unsigned transport_id,
void *pkt, pj_size_t size,
const pj_sockaddr_t *src_addr,
unsigned src_addr_len);
} pj_ice_sess_cb;
/**
* This enumeration describes the role of the ICE agent.
*/
typedef enum pj_ice_sess_role
{
/**
* The role is unknown.
*/
PJ_ICE_SESS_ROLE_UNKNOWN,
/**
* The ICE agent is in controlled role.
*/
PJ_ICE_SESS_ROLE_CONTROLLED,
/**
* The ICE agent is in controlling role.
*/
PJ_ICE_SESS_ROLE_CONTROLLING
} pj_ice_sess_role;
/**
* This structure represents an incoming check (an incoming Binding
* request message), and is mainly used to keep early checks in the
* list in the ICE session. An early check is a request received
* from remote when we haven't received SDP answer yet, therefore we
* can't perform triggered check. For such cases, keep the incoming
* request in a list, and we'll do triggered checks (simultaneously)
* as soon as we receive answer.
*/
typedef struct pj_ice_rx_check
{
PJ_DECL_LIST_MEMBER(struct pj_ice_rx_check); /**< Standard list */
unsigned comp_id; /**< Component ID. */
unsigned transport_id; /**< Transport ID. */
pj_sockaddr src_addr; /**< Source address of request */
unsigned src_addr_len; /**< Length of src address. */
pj_bool_t use_candidate; /**< USE-CANDIDATE is present? */
pj_uint32_t priority; /**< PRIORITY value in the req. */
pj_stun_uint64_attr *role_attr; /**< ICE-CONTROLLING/CONTROLLED */
} pj_ice_rx_check;
/**
* This structure describes various ICE session options. Application
* configure the ICE session with these options by calling
* #pj_ice_sess_set_options().
*/
typedef struct pj_ice_sess_options
{
/**
* Specify whether to use aggressive nomination.
*/
pj_bool_t aggressive;
/**
* For controlling agent if it uses regular nomination, specify the delay
* to perform nominated check (connectivity check with USE-CANDIDATE
* attribute) after all components have a valid pair.
*
* Default value is PJ_ICE_NOMINATED_CHECK_DELAY.
*/
unsigned nominated_check_delay;
/**
* For a controlled agent, specify how long it wants to wait (in
* milliseconds) for the controlling agent to complete sending
* connectivity check with nominated flag set to true for all components
* after the controlled agent has found that all connectivity checks in
* its checklist have been completed and there is at least one successful
* (but not nominated) check for every component.
*
* Default value for this option is
* ICE_CONTROLLED_AGENT_WAIT_NOMINATION_TIMEOUT. Specify -1 to disable
* this timer.
*/
int controlled_agent_want_nom_timeout;
} pj_ice_sess_options;
/**
* This structure describes the ICE session. For this version of PJNATH,
* an ICE session corresponds to a single media stream (unlike the ICE
* session described in the ICE standard where an ICE session covers the
* whole media and may consist of multiple media streams). The decision
* to support only a single media session was chosen for simplicity,
* while still allowing application to utilize multiple media streams by
* creating multiple ICE sessions, one for each media stream.
*/
struct pj_ice_sess
{
char obj_name[PJ_MAX_OBJ_NAME]; /**< Object name. */
pj_pool_t *pool; /**< Pool instance. */
void *user_data; /**< App. data. */
pj_grp_lock_t *grp_lock; /**< Group lock */
pj_ice_sess_role role; /**< ICE role. */
pj_ice_sess_options opt; /**< Options */
pj_timestamp tie_breaker; /**< Tie breaker value */
pj_uint8_t *prefs; /**< Type preference. */
pj_bool_t is_nominating; /**< Nominating stage */
pj_bool_t is_complete; /**< Complete? */
pj_bool_t is_destroying; /**< Destroy is called */
pj_status_t ice_status; /**< Error status. */
pj_timer_entry timer; /**< ICE timer. */
pj_ice_sess_cb cb; /**< Callback. */
pj_stun_config stun_cfg; /**< STUN settings. */
/* STUN credentials */
pj_str_t tx_ufrag; /**< Remote ufrag. */
pj_str_t tx_uname; /**< Uname for TX. */
pj_str_t tx_pass; /**< Remote password. */
pj_str_t rx_ufrag; /**< Local ufrag. */
pj_str_t rx_uname; /**< Uname for RX */
pj_str_t rx_pass; /**< Local password. */
/* Components */
unsigned comp_cnt; /**< # of components. */
pj_ice_sess_comp comp[PJ_ICE_MAX_COMP]; /**< Component array */
unsigned comp_ka; /**< Next comp for KA */
/* Local candidates */
unsigned lcand_cnt; /**< # of local cand. */
pj_ice_sess_cand lcand[PJ_ICE_MAX_CAND]; /**< Array of cand. */
/* Remote candidates */
unsigned rcand_cnt; /**< # of remote cand. */
pj_ice_sess_cand rcand[PJ_ICE_MAX_CAND]; /**< Array of cand. */
/** Array of transport datas */
pj_ice_msg_data tp_data[4];
/* List of eearly checks */
pj_ice_rx_check early_check; /**< Early checks. */
/* Checklist */
pj_ice_sess_checklist clist; /**< Active checklist */
/* Valid list */
pj_ice_sess_checklist valid_list; /**< Valid list. */
/** Temporary buffer for misc stuffs to avoid using stack too much */
union {
char txt[128];
char errmsg[PJ_ERR_MSG_SIZE];
} tmp;
};
/**
* This is a utility function to retrieve the string name for the
* particular candidate type.
*
* @param type Candidate type.
*
* @return The string representation of the candidate type.
*/
PJ_DECL(const char*) pj_ice_get_cand_type_name(pj_ice_cand_type type);
/**
* This is a utility function to retrieve the string name for the
* particular role type.
*
* @param role Role type.
*
* @return The string representation of the role.
*/
PJ_DECL(const char*) pj_ice_sess_role_name(pj_ice_sess_role role);
/**
* This is a utility function to calculate the foundation identification
* for a candidate.
*
* @param pool Pool to allocate the foundation string.
* @param foundation Pointer to receive the foundation string.
* @param type Candidate type.
* @param base_addr Base address of the candidate.
*/
PJ_DECL(void) pj_ice_calc_foundation(pj_pool_t *pool,
pj_str_t *foundation,
pj_ice_cand_type type,
const pj_sockaddr *base_addr);
/**
* Initialize ICE session options with library default values.
*
* @param opt ICE session options.
*/
PJ_DECL(void) pj_ice_sess_options_default(pj_ice_sess_options *opt);
/**
* Create ICE session with the specified role and number of components.
* Application would typically need to create an ICE session before
* sending an offer or upon receiving one. After the session is created,
* application can register candidates to the ICE session by calling
* #pj_ice_sess_add_cand() function.
*
* @param stun_cfg The STUN configuration settings, containing among
* other things the timer heap instance to be used
* by the ICE session.
* @param name Optional name to identify this ICE instance in
* the log file.
* @param role ICE role.
* @param comp_cnt Number of components.
* @param cb ICE callback.
* @param local_ufrag Optional string to be used as local username to
* authenticate incoming STUN binding request. If
* the value is NULL, a random string will be
* generated.
* @param local_passwd Optional string to be used as local password.
* @param grp_lock Optional group lock to be used by this session.
* If NULL, the session will create one itself.
* @param p_ice Pointer to receive the ICE session instance.
*
* @return PJ_SUCCESS if ICE session is created successfully.
*/
PJ_DECL(pj_status_t) pj_ice_sess_create(pj_stun_config *stun_cfg,
const char *name,
pj_ice_sess_role role,
unsigned comp_cnt,
const pj_ice_sess_cb *cb,
const pj_str_t *local_ufrag,
const pj_str_t *local_passwd,
pj_grp_lock_t *grp_lock,
pj_ice_sess **p_ice);
/**
* Get the value of various options of the ICE session.
*
* @param ice The ICE session.
* @param opt The options to be initialized with the values
* from the ICE session.
*
* @return PJ_SUCCESS on success, or the appropriate error.
*/
PJ_DECL(pj_status_t) pj_ice_sess_get_options(pj_ice_sess *ice,
pj_ice_sess_options *opt);
/**
* Specify various options for this ICE session. Application MUST only
* call this function after the ICE session has been created but before
* any connectivity check is started.
*
* Application should call #pj_ice_sess_get_options() to initialize the
* options with their default values.
*
* @param ice The ICE session.
* @param opt Options to be applied to the ICE session.
*
* @return PJ_SUCCESS on success, or the appropriate error.
*/
PJ_DECL(pj_status_t) pj_ice_sess_set_options(pj_ice_sess *ice,
const pj_ice_sess_options *opt);
/**
* Destroy ICE session. This will cancel any connectivity checks currently
* running, if any, and any other events scheduled by this session, as well
* as all memory resources.
*
* @param ice ICE session instance.
*
* @return PJ_SUCCESS on success.
*/
PJ_DECL(pj_status_t) pj_ice_sess_destroy(pj_ice_sess *ice);
/**
* Change session role. This happens for example when ICE session was
* created with controlled role when receiving an offer, but it turns out
* that the offer contains "a=ice-lite" attribute when the SDP gets
* inspected.
*
* @param ice The ICE session.
* @param new_role The new role to be set.
*
* @return PJ_SUCCESS on success, or the appropriate error.
*/
PJ_DECL(pj_status_t) pj_ice_sess_change_role(pj_ice_sess *ice,
pj_ice_sess_role new_role);
/**
* Assign a custom preference values for ICE candidate types. By assigning
* custom preference value, application can control the order of candidates
* to be checked first. The default preference settings is to use 126 for
* host candidates, 100 for server reflexive candidates, 110 for peer
* reflexive candidates, an 0 for relayed candidates.
*
* Note that this function must be called before any candidates are added
* to the ICE session.
*
* @param ice The ICE session.
* @param prefs Array of candidate preference value. The values are
* put in the array indexed by the candidate type as
* specified in pj_ice_cand_type.
*
* @return PJ_SUCCESS on success, or the appropriate error code.
*/
PJ_DECL(pj_status_t) pj_ice_sess_set_prefs(pj_ice_sess *ice,
const pj_uint8_t prefs[4]);
/**
* Add a candidate to this ICE session. Application must add candidates for
* each components ID before it can start pairing the candidates and
* performing connectivity checks.
*
* @param ice ICE session instance.
* @param comp_id Component ID of this candidate.
* @param transport_id Transport ID to be used to send packets for this
* candidate.
* @param type Candidate type.
* @param local_pref Local preference for this candidate, which
* normally should be set to 65535.
* @param foundation Foundation identification.
* @param addr The candidate address.
* @param base_addr The candidate's base address.
* @param rel_addr Optional related address.
* @param addr_len Length of addresses.
* @param p_cand_id Optional pointer to receive the candidate ID.
*
* @return PJ_SUCCESS if candidate is successfully added.
*/
PJ_DECL(pj_status_t) pj_ice_sess_add_cand(pj_ice_sess *ice,
unsigned comp_id,
unsigned transport_id,
pj_ice_cand_type type,
pj_uint16_t local_pref,
const pj_str_t *foundation,
const pj_sockaddr_t *addr,
const pj_sockaddr_t *base_addr,
const pj_sockaddr_t *rel_addr,
int addr_len,
unsigned *p_cand_id);
/**
* Find default candidate for the specified component ID, using this
* rule:
* - if the component has a successful candidate pair, then the
* local candidate of this pair will be returned.
* - otherwise a relay, reflexive, or host candidate will be selected
* on that specified order.
*
* @param ice The ICE session instance.
* @param comp_id The component ID.
* @param p_cand_id Pointer to receive the candidate ID.
*
* @return PJ_SUCCESS if a candidate has been selected.
*/
PJ_DECL(pj_status_t) pj_ice_sess_find_default_cand(pj_ice_sess *ice,
unsigned comp_id,
int *p_cand_id);
/**
* Pair the local and remote candidates to create check list. Application
* typically would call this function after receiving SDP containing ICE
* candidates from the remote host (either upon receiving the initial
* offer, for UAS, or upon receiving the answer, for UAC).
*
* Note that ICE connectivity check will not start until application calls
* #pj_ice_sess_start_check().
*
* @param ice ICE session instance.
* @param rem_ufrag Remote ufrag, as seen in the SDP received from
* the remote agent.
* @param rem_passwd Remote password, as seen in the SDP received from
* the remote agent.
* @param rem_cand_cnt Number of remote candidates.
* @param rem_cand Remote candidate array. Remote candidates are
* gathered from the SDP received from the remote
* agent.
*
* @return PJ_SUCCESS or the appropriate error code.
*/
PJ_DECL(pj_status_t)
pj_ice_sess_create_check_list(pj_ice_sess *ice,
const pj_str_t *rem_ufrag,
const pj_str_t *rem_passwd,
unsigned rem_cand_cnt,
const pj_ice_sess_cand rem_cand[]);
/**
* Start ICE periodic check. This function will return immediately, and
* application will be notified about the connectivity check status in
* #pj_ice_sess_cb callback.
*
* @param ice The ICE session instance.
*
* @return PJ_SUCCESS or the appropriate error code.
*/
PJ_DECL(pj_status_t) pj_ice_sess_start_check(pj_ice_sess *ice);
/**
* Send data using this ICE session. If ICE checks have not produced a
* valid check for the specified component ID, this function will return
* with failure. Otherwise ICE session will send the packet to remote
* destination using the nominated local candidate for the specified
* component.
*
* This function will in turn call \a on_tx_pkt function in
* #pj_ice_sess_cb callback to actually send the packet to the wire.
*
* @param ice The ICE session.
* @param comp_id Component ID.
* @param data The data or packet to be sent.
* @param data_len Size of data or packet, in bytes.
*
* @return PJ_SUCCESS if data is sent successfully.
*/
PJ_DECL(pj_status_t) pj_ice_sess_send_data(pj_ice_sess *ice,
unsigned comp_id,
const void *data,
pj_size_t data_len);
/**
* Report the arrival of packet to the ICE session. Since ICE session
* itself doesn't have any transports, it relies on application or
* higher layer component to give incoming packets to the ICE session.
* If the packet is not a STUN packet, this packet will be given back
* to application via \a on_rx_data() callback in #pj_ice_sess_cb.
*
* @param ice The ICE session.
* @param comp_id Component ID.
* @param transport_id Number to identify where this packet was received
* from. This parameter will be returned back to
* application in \a on_tx_pkt() callback.
* @param pkt Incoming packet.
* @param pkt_size Size of incoming packet.
* @param src_addr Source address of the packet.
* @param src_addr_len Length of the address.
*
* @return PJ_SUCCESS or the appropriate error code.
*/
PJ_DECL(pj_status_t) pj_ice_sess_on_rx_pkt(pj_ice_sess *ice,
unsigned comp_id,
unsigned transport_id,
void *pkt,
pj_size_t pkt_size,
const pj_sockaddr_t *src_addr,
int src_addr_len);
/**
* @}
*/
PJ_END_DECL
#endif /* __PJNATH_ICE_SESSION_H__ */