| /* config.h.in. Generated from configure.ac by autoheader. */ |
| |
| |
| /* On Unix-like systems config.h.in is converted by "configure" into config.h. |
| Some other environments also support the use of "configure". PCRE is written in |
| Standard C, but there are a few non-standard things it can cope with, allowing |
| it to run on SunOS4 and other "close to standard" systems. |
| |
| If you are going to build PCRE "by hand" on a system without "configure" you |
| should copy the distributed config.h.generic to config.h, and then set up the |
| macro definitions the way you need them. You must then add -DHAVE_CONFIG_H to |
| all of your compile commands, so that config.h is included at the start of |
| every source. |
| |
| Alternatively, you can avoid editing by using -D on the compiler command line |
| to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H. |
| |
| PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if |
| HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set |
| them both to 0; an emulation function will be used. */ |
| |
| /* By default, the \R escape sequence matches any Unicode line ending |
| character or sequence of characters. If BSR_ANYCRLF is defined, this is |
| changed so that backslash-R matches only CR, LF, or CRLF. The build- time |
| default can be overridden by the user of PCRE at runtime. On systems that |
| support it, "configure" can be used to override the default. */ |
| #undef BSR_ANYCRLF |
| |
| /* If you are compiling for a system that uses EBCDIC instead of ASCII |
| character codes, define this macro as 1. On systems that can use |
| "configure", this can be done via --enable-ebcdic. PCRE will then assume |
| that all input strings are in EBCDIC. If you do not define this macro, PCRE |
| will assume input strings are ASCII or UTF-8 Unicode. It is not possible to |
| build a version of PCRE that supports both EBCDIC and UTF-8. */ |
| #undef EBCDIC |
| |
| /* Define to 1 if you have the `bcopy' function. */ |
| #undef HAVE_BCOPY |
| |
| /* Define to 1 if you have the <bits/type_traits.h> header file. */ |
| #undef HAVE_BITS_TYPE_TRAITS_H |
| |
| /* Define to 1 if you have the <bzlib.h> header file. */ |
| #undef HAVE_BZLIB_H |
| |
| /* Define to 1 if you have the <dirent.h> header file. */ |
| #undef HAVE_DIRENT_H |
| |
| /* Define to 1 if you have the <dlfcn.h> header file. */ |
| #undef HAVE_DLFCN_H |
| |
| /* Define to 1 if you have the <inttypes.h> header file. */ |
| #undef HAVE_INTTYPES_H |
| |
| /* Define to 1 if you have the <limits.h> header file. */ |
| #undef HAVE_LIMITS_H |
| |
| /* Define to 1 if the system has the type `long long'. */ |
| #undef HAVE_LONG_LONG |
| |
| /* Define to 1 if you have the `memmove' function. */ |
| #undef HAVE_MEMMOVE |
| |
| /* Define to 1 if you have the <memory.h> header file. */ |
| #undef HAVE_MEMORY_H |
| |
| /* Define to 1 if you have the <readline/history.h> header file. */ |
| #undef HAVE_READLINE_HISTORY_H |
| |
| /* Define to 1 if you have the <readline/readline.h> header file. */ |
| #undef HAVE_READLINE_READLINE_H |
| |
| /* Define to 1 if you have the <stdint.h> header file. */ |
| #undef HAVE_STDINT_H |
| |
| /* Define to 1 if you have the <stdlib.h> header file. */ |
| #undef HAVE_STDLIB_H |
| |
| /* Define to 1 if you have the `strerror' function. */ |
| #undef HAVE_STRERROR |
| |
| /* Define to 1 if you have the <string> header file. */ |
| #undef HAVE_STRING |
| |
| /* Define to 1 if you have the <strings.h> header file. */ |
| #undef HAVE_STRINGS_H |
| |
| /* Define to 1 if you have the <string.h> header file. */ |
| #undef HAVE_STRING_H |
| |
| /* Define to 1 if you have `strtoimax'. */ |
| #undef HAVE_STRTOIMAX |
| |
| /* Define to 1 if you have `strtoll'. */ |
| #undef HAVE_STRTOLL |
| |
| /* Define to 1 if you have `strtoq'. */ |
| #undef HAVE_STRTOQ |
| |
| /* Define to 1 if you have the <sys/stat.h> header file. */ |
| #undef HAVE_SYS_STAT_H |
| |
| /* Define to 1 if you have the <sys/types.h> header file. */ |
| #undef HAVE_SYS_TYPES_H |
| |
| /* Define to 1 if you have the <type_traits.h> header file. */ |
| #undef HAVE_TYPE_TRAITS_H |
| |
| /* Define to 1 if you have the <unistd.h> header file. */ |
| #undef HAVE_UNISTD_H |
| |
| /* Define to 1 if the system has the type `unsigned long long'. */ |
| #undef HAVE_UNSIGNED_LONG_LONG |
| |
| /* Define to 1 if you have the <windows.h> header file. */ |
| #undef HAVE_WINDOWS_H |
| |
| /* Define to 1 if you have the <zlib.h> header file. */ |
| #undef HAVE_ZLIB_H |
| |
| /* Define to 1 if you have `_strtoi64'. */ |
| #undef HAVE__STRTOI64 |
| |
| /* The value of LINK_SIZE determines the number of bytes used to store links |
| as offsets within the compiled regex. The default is 2, which allows for |
| compiled patterns up to 64K long. This covers the vast majority of cases. |
| However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows |
| for longer patterns in extreme cases. On systems that support it, |
| "configure" can be used to override this default. */ |
| #undef LINK_SIZE |
| |
| /* Define to the sub-directory in which libtool stores uninstalled libraries. |
| */ |
| #undef LT_OBJDIR |
| |
| /* The value of MATCH_LIMIT determines the default number of times the |
| internal match() function can be called during a single execution of |
| pcre_exec(). There is a runtime interface for setting a different limit. |
| The limit exists in order to catch runaway regular expressions that take |
| for ever to determine that they do not match. The default is set very large |
| so that it does not accidentally catch legitimate cases. On systems that |
| support it, "configure" can be used to override this default default. */ |
| #undef MATCH_LIMIT |
| |
| /* The above limit applies to all calls of match(), whether or not they |
| increase the recursion depth. In some environments it is desirable to limit |
| the depth of recursive calls of match() more strictly, in order to restrict |
| the maximum amount of stack (or heap, if NO_RECURSE is defined) that is |
| used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of |
| match(). To have any useful effect, it must be less than the value of |
| MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is |
| a runtime method for setting a different limit. On systems that support it, |
| "configure" can be used to override the default. */ |
| #undef MATCH_LIMIT_RECURSION |
| |
| /* This limit is parameterized just in case anybody ever wants to change it. |
| Care must be taken if it is increased, because it guards against integer |
| overflow caused by enormously large patterns. */ |
| #undef MAX_NAME_COUNT |
| |
| /* This limit is parameterized just in case anybody ever wants to change it. |
| Care must be taken if it is increased, because it guards against integer |
| overflow caused by enormously large patterns. */ |
| #undef MAX_NAME_SIZE |
| |
| /* The value of NEWLINE determines the newline character sequence. On systems |
| that support it, "configure" can be used to override the default, which is |
| 10. The possible values are 10 (LF), 13 (CR), 3338 (CRLF), -1 (ANY), or -2 |
| (ANYCRLF). */ |
| #undef NEWLINE |
| |
| /* PCRE uses recursive function calls to handle backtracking while matching. |
| This can sometimes be a problem on systems that have stacks of limited |
| size. Define NO_RECURSE to get a version that doesn't use recursion in the |
| match() function; instead it creates its own stack by steam using |
| pcre_recurse_malloc() to obtain memory from the heap. For more detail, see |
| the comments and other stuff just above the match() function. On systems |
| that support it, "configure" can be used to set this in the Makefile (use |
| --disable-stack-for-recursion). */ |
| #undef NO_RECURSE |
| |
| /* Name of package */ |
| #undef PACKAGE |
| |
| /* Define to the address where bug reports for this package should be sent. */ |
| #undef PACKAGE_BUGREPORT |
| |
| /* Define to the full name of this package. */ |
| #undef PACKAGE_NAME |
| |
| /* Define to the full name and version of this package. */ |
| #undef PACKAGE_STRING |
| |
| /* Define to the one symbol short name of this package. */ |
| #undef PACKAGE_TARNAME |
| |
| /* Define to the home page for this package. */ |
| #undef PACKAGE_URL |
| |
| /* Define to the version of this package. */ |
| #undef PACKAGE_VERSION |
| |
| /* The value of PCREGREP_BUFSIZE determines the size of buffer used by |
| pcregrep to hold parts of the file it is searching. On systems that support |
| it, "configure" can be used to override the default, which is 8192. This is |
| also the minimum value. The actual amount of memory used by pcregrep is |
| three times this number, because it allows for the buffering of "before" |
| and "after" lines. */ |
| #undef PCREGREP_BUFSIZE |
| |
| |
| /* If you are compiling for a system other than a Unix-like system or |
| Win32, and it needs some magic to be inserted before the definition |
| of a function that is exported by the library, define this macro to |
| contain the relevant magic. If you do not define this macro, it |
| defaults to "extern" for a C compiler and "extern C" for a C++ |
| compiler on non-Win32 systems. This macro apears at the start of |
| every exported function that is part of the external API. It does |
| not appear on functions that are "external" in the C sense, but |
| which are internal to the library. */ |
| #undef PCRE_EXP_DEFN |
| |
| /* Define if linking statically (TODO: make nice with Libtool) */ |
| #undef PCRE_STATIC |
| |
| /* When calling PCRE via the POSIX interface, additional working storage is |
| required for holding the pointers to capturing substrings because PCRE |
| requires three integers per substring, whereas the POSIX interface provides |
| only two. If the number of expected substrings is small, the wrapper |
| function uses space on the stack, because this is faster than using |
| malloc() for each call. The threshold above which the stack is no longer |
| used is defined by POSIX_MALLOC_THRESHOLD. On systems that support it, |
| "configure" can be used to override this default. */ |
| #undef POSIX_MALLOC_THRESHOLD |
| |
| /* Define to 1 if you have the ANSI C header files. */ |
| #undef STDC_HEADERS |
| |
| /* Define to enable support for Just-In-Time compiling. */ |
| #undef SUPPORT_JIT |
| |
| /* Define to allow pcregrep to be linked with libbz2, so that it is able to |
| handle .bz2 files. */ |
| #undef SUPPORT_LIBBZ2 |
| |
| /* Define to allow pcretest to be linked with libreadline. */ |
| #undef SUPPORT_LIBREADLINE |
| |
| /* Define to allow pcregrep to be linked with libz, so that it is able to |
| handle .gz files. */ |
| #undef SUPPORT_LIBZ |
| |
| /* Define to enable JIT support in pcregrep. */ |
| #undef SUPPORT_PCREGREP_JIT |
| |
| /* Define to enable support for Unicode properties. */ |
| #undef SUPPORT_UCP |
| |
| /* Define to enable support for the UTF-8 Unicode encoding. This will work |
| even in an EBCDIC environment, but it is incompatible with the EBCDIC |
| macro. That is, PCRE can support *either* EBCDIC code *or* ASCII/UTF-8, but |
| not both at once. */ |
| #undef SUPPORT_UTF8 |
| |
| /* Version number of package */ |
| #undef VERSION |
| |
| /* Define to empty if `const' does not conform to ANSI C. */ |
| #undef const |
| |
| /* Define to the type of a signed integer type of width exactly 64 bits if |
| such a type exists and the standard includes do not define it. */ |
| #undef int64_t |
| |
| /* Define to `unsigned int' if <sys/types.h> does not define. */ |
| #undef size_t |