/*************************************************
*             PCRE testing program               *
*************************************************/

/* This program was hacked up as a tester for PCRE. I really should have
written it more tidily in the first place. Will I ever learn? It has grown and
been extended and consequently is now rather, er, *very* untidy in places.

-----------------------------------------------------------------------------
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

    * Redistributions of source code must retain the above copyright notice,
      this list of conditions and the following disclaimer.

    * Redistributions in binary form must reproduce the above copyright
      notice, this list of conditions and the following disclaimer in the
      documentation and/or other materials provided with the distribution.

    * Neither the name of the University of Cambridge nor the names of its
      contributors may be used to endorse or promote products derived from
      this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
-----------------------------------------------------------------------------
*/


#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <ctype.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <time.h>
#include <locale.h>
#include <errno.h>

#ifdef SUPPORT_LIBREADLINE
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include <readline/readline.h>
#include <readline/history.h>
#endif


/* A number of things vary for Windows builds. Originally, pcretest opened its
input and output without "b"; then I was told that "b" was needed in some
environments, so it was added for release 5.0 to both the input and output. (It
makes no difference on Unix-like systems.) Later I was told that it is wrong
for the input on Windows. I've now abstracted the modes into two macros that
are set here, to make it easier to fiddle with them, and removed "b" from the
input mode under Windows. */

#if defined(_WIN32) || defined(WIN32)
#include <io.h>                /* For _setmode() */
#include <fcntl.h>             /* For _O_BINARY */
#define INPUT_MODE   "r"
#define OUTPUT_MODE  "wb"

#ifndef isatty
#define isatty _isatty         /* This is what Windows calls them, I'm told, */
#endif                         /* though in some environments they seem to   */
                               /* be already defined, hence the #ifndefs.    */
#ifndef fileno
#define fileno _fileno
#endif

/* A user sent this fix for Borland Builder 5 under Windows. */

#ifdef __BORLANDC__
#define _setmode(handle, mode) setmode(handle, mode)
#endif

/* Not Windows */

#else
#include <sys/time.h>          /* These two includes are needed */
#include <sys/resource.h>      /* for setrlimit(). */
#define INPUT_MODE   "rb"
#define OUTPUT_MODE  "wb"
#endif


/* We have to include pcre_internal.h because we need the internal info for
displaying the results of pcre_study() and we also need to know about the
internal macros, structures, and other internal data values; pcretest has
"inside information" compared to a program that strictly follows the PCRE API.

Although pcre_internal.h does itself include pcre.h, we explicitly include it
here before pcre_internal.h so that the PCRE_EXP_xxx macros get set
appropriately for an application, not for building PCRE. */

#include "pcre.h"
#include "pcre_internal.h"

/* We need access to some of the data tables that PCRE uses. So as not to have
to keep two copies, we include the source file here, changing the names of the
external symbols to prevent clashes. */

#define _pcre_ucp_gentype      ucp_gentype
#define _pcre_ucp_typerange    ucp_typerange
#define _pcre_utf8_table1      utf8_table1
#define _pcre_utf8_table1_size utf8_table1_size
#define _pcre_utf8_table2      utf8_table2
#define _pcre_utf8_table3      utf8_table3
#define _pcre_utf8_table4      utf8_table4
#define _pcre_utf8_char_sizes  utf8_char_sizes
#define _pcre_utt              utt
#define _pcre_utt_size         utt_size
#define _pcre_utt_names        utt_names
#define _pcre_OP_lengths       OP_lengths

#include "pcre_tables.c"

/* We also need the pcre_printint() function for printing out compiled
patterns. This function is in a separate file so that it can be included in
pcre_compile.c when that module is compiled with debugging enabled. It needs to
know which case is being compiled. */

#define COMPILING_PCRETEST
#include "pcre_printint.src"

/* The definition of the macro PRINTABLE, which determines whether to print an
output character as-is or as a hex value when showing compiled patterns, is
contained in the printint.src file. We uses it here also, in cases when the
locale has not been explicitly changed, so as to get consistent output from
systems that differ in their output from isprint() even in the "C" locale. */

#define PRINTHEX(c) (locale_set? isprint(c) : PRINTABLE(c))

/* It is possible to compile this test program without including support for
testing the POSIX interface, though this is not available via the standard
Makefile. */

#if !defined NOPOSIX
#include "pcreposix.h"
#endif

/* It is also possible, for the benefit of the version currently imported into
Exim, to build pcretest without support for UTF8 (define NOUTF8), without the
interface to the DFA matcher (NODFA), and without the doublecheck of the old
"info" function (define NOINFOCHECK). In fact, we automatically cut out the
UTF8 support if PCRE is built without it. */

#ifndef SUPPORT_UTF8
#ifndef NOUTF8
#define NOUTF8
#endif
#endif


/* Other parameters */

#ifndef CLOCKS_PER_SEC
#ifdef CLK_TCK
#define CLOCKS_PER_SEC CLK_TCK
#else
#define CLOCKS_PER_SEC 100
#endif
#endif

/* This is the default loop count for timing. */

#define LOOPREPEAT 500000

/* Static variables */

static FILE *outfile;
static int log_store = 0;
static int callout_count;
static int callout_extra;
static int callout_fail_count;
static int callout_fail_id;
static int debug_lengths;
static int first_callout;
static int locale_set = 0;
static int show_malloc;
static int use_utf8;
static size_t gotten_store;
static size_t first_gotten_store = 0;
static const unsigned char *last_callout_mark = NULL;

/* The buffers grow automatically if very long input lines are encountered. */

static int buffer_size = 50000;
static uschar *buffer = NULL;
static uschar *dbuffer = NULL;
static uschar *pbuffer = NULL;

/* Textual explanations for runtime error codes */

static const char *errtexts[] = {
  NULL,  /* 0 is no error */
  NULL,  /* NOMATCH is handled specially */
  "NULL argument passed",
  "bad option value",
  "magic number missing",
  "unknown opcode - pattern overwritten?",
  "no more memory",
  NULL,  /* never returned by pcre_exec() or pcre_dfa_exec() */
  "match limit exceeded",
  "callout error code",
  NULL,  /* BADUTF8 is handled specially */
  "bad UTF-8 offset",
  NULL,  /* PARTIAL is handled specially */
  "not used - internal error",
  "internal error - pattern overwritten?",
  "bad count value",
  "item unsupported for DFA matching",
  "backreference condition or recursion test not supported for DFA matching",
  "match limit not supported for DFA matching",
  "workspace size exceeded in DFA matching",
  "too much recursion for DFA matching",
  "recursion limit exceeded",
  "not used - internal error",
  "invalid combination of newline options",
  "bad offset value",
  NULL,  /* SHORTUTF8 is handled specially */
  "nested recursion at the same subject position",
  "JIT stack limit reached"
};


/*************************************************
*         Alternate character tables             *
*************************************************/

/* By default, the "tables" pointer when calling PCRE is set to NULL, thereby
using the default tables of the library. However, the T option can be used to
select alternate sets of tables, for different kinds of testing. Note also that
the L (locale) option also adjusts the tables. */

/* This is the set of tables distributed as default with PCRE. It recognizes
only ASCII characters. */

static const unsigned char tables0[] = {

/* This table is a lower casing table. */

    0,  1,  2,  3,  4,  5,  6,  7,
    8,  9, 10, 11, 12, 13, 14, 15,
   16, 17, 18, 19, 20, 21, 22, 23,
   24, 25, 26, 27, 28, 29, 30, 31,
   32, 33, 34, 35, 36, 37, 38, 39,
   40, 41, 42, 43, 44, 45, 46, 47,
   48, 49, 50, 51, 52, 53, 54, 55,
   56, 57, 58, 59, 60, 61, 62, 63,
   64, 97, 98, 99,100,101,102,103,
  104,105,106,107,108,109,110,111,
  112,113,114,115,116,117,118,119,
  120,121,122, 91, 92, 93, 94, 95,
   96, 97, 98, 99,100,101,102,103,
  104,105,106,107,108,109,110,111,
  112,113,114,115,116,117,118,119,
  120,121,122,123,124,125,126,127,
  128,129,130,131,132,133,134,135,
  136,137,138,139,140,141,142,143,
  144,145,146,147,148,149,150,151,
  152,153,154,155,156,157,158,159,
  160,161,162,163,164,165,166,167,
  168,169,170,171,172,173,174,175,
  176,177,178,179,180,181,182,183,
  184,185,186,187,188,189,190,191,
  192,193,194,195,196,197,198,199,
  200,201,202,203,204,205,206,207,
  208,209,210,211,212,213,214,215,
  216,217,218,219,220,221,222,223,
  224,225,226,227,228,229,230,231,
  232,233,234,235,236,237,238,239,
  240,241,242,243,244,245,246,247,
  248,249,250,251,252,253,254,255,

/* This table is a case flipping table. */

    0,  1,  2,  3,  4,  5,  6,  7,
    8,  9, 10, 11, 12, 13, 14, 15,
   16, 17, 18, 19, 20, 21, 22, 23,
   24, 25, 26, 27, 28, 29, 30, 31,
   32, 33, 34, 35, 36, 37, 38, 39,
   40, 41, 42, 43, 44, 45, 46, 47,
   48, 49, 50, 51, 52, 53, 54, 55,
   56, 57, 58, 59, 60, 61, 62, 63,
   64, 97, 98, 99,100,101,102,103,
  104,105,106,107,108,109,110,111,
  112,113,114,115,116,117,118,119,
  120,121,122, 91, 92, 93, 94, 95,
   96, 65, 66, 67, 68, 69, 70, 71,
   72, 73, 74, 75, 76, 77, 78, 79,
   80, 81, 82, 83, 84, 85, 86, 87,
   88, 89, 90,123,124,125,126,127,
  128,129,130,131,132,133,134,135,
  136,137,138,139,140,141,142,143,
  144,145,146,147,148,149,150,151,
  152,153,154,155,156,157,158,159,
  160,161,162,163,164,165,166,167,
  168,169,170,171,172,173,174,175,
  176,177,178,179,180,181,182,183,
  184,185,186,187,188,189,190,191,
  192,193,194,195,196,197,198,199,
  200,201,202,203,204,205,206,207,
  208,209,210,211,212,213,214,215,
  216,217,218,219,220,221,222,223,
  224,225,226,227,228,229,230,231,
  232,233,234,235,236,237,238,239,
  240,241,242,243,244,245,246,247,
  248,249,250,251,252,253,254,255,

/* This table contains bit maps for various character classes. Each map is 32
bytes long and the bits run from the least significant end of each byte. The
classes that have their own maps are: space, xdigit, digit, upper, lower, word,
graph, print, punct, and cntrl. Other classes are built from combinations. */

  0x00,0x3e,0x00,0x00,0x01,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

  0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
  0x7e,0x00,0x00,0x00,0x7e,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

  0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0xfe,0xff,0xff,0x07,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0x07,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

  0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03,
  0xfe,0xff,0xff,0x87,0xfe,0xff,0xff,0x07,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

  0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0xff,
  0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

  0x00,0x00,0x00,0x00,0xff,0xff,0xff,0xff,
  0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

  0x00,0x00,0x00,0x00,0xfe,0xff,0x00,0xfc,
  0x01,0x00,0x00,0xf8,0x01,0x00,0x00,0x78,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

  0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/* This table identifies various classes of character by individual bits:
  0x01   white space character
  0x02   letter
  0x04   decimal digit
  0x08   hexadecimal digit
  0x10   alphanumeric or '_'
  0x80   regular expression metacharacter or binary zero
*/

  0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*   0-  7 */
  0x00,0x01,0x01,0x00,0x01,0x01,0x00,0x00, /*   8- 15 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  16- 23 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*  24- 31 */
  0x01,0x00,0x00,0x00,0x80,0x00,0x00,0x00, /*    - '  */
  0x80,0x80,0x80,0x80,0x00,0x00,0x80,0x00, /*  ( - /  */
  0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /*  0 - 7  */
  0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x80, /*  8 - ?  */
  0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /*  @ - G  */
  0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  H - O  */
  0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  P - W  */
  0x12,0x12,0x12,0x80,0x80,0x00,0x80,0x10, /*  X - _  */
  0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /*  ` - g  */
  0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  h - o  */
  0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /*  p - w  */
  0x12,0x12,0x12,0x80,0x80,0x00,0x00,0x00, /*  x -127 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */

/* This is a set of tables that came orginally from a Windows user. It seems to
be at least an approximation of ISO 8859. In particular, there are characters
greater than 128 that are marked as spaces, letters, etc. */

static const unsigned char tables1[] = {
0,1,2,3,4,5,6,7,
8,9,10,11,12,13,14,15,
16,17,18,19,20,21,22,23,
24,25,26,27,28,29,30,31,
32,33,34,35,36,37,38,39,
40,41,42,43,44,45,46,47,
48,49,50,51,52,53,54,55,
56,57,58,59,60,61,62,63,
64,97,98,99,100,101,102,103,
104,105,106,107,108,109,110,111,
112,113,114,115,116,117,118,119,
120,121,122,91,92,93,94,95,
96,97,98,99,100,101,102,103,
104,105,106,107,108,109,110,111,
112,113,114,115,116,117,118,119,
120,121,122,123,124,125,126,127,
128,129,130,131,132,133,134,135,
136,137,138,139,140,141,142,143,
144,145,146,147,148,149,150,151,
152,153,154,155,156,157,158,159,
160,161,162,163,164,165,166,167,
168,169,170,171,172,173,174,175,
176,177,178,179,180,181,182,183,
184,185,186,187,188,189,190,191,
224,225,226,227,228,229,230,231,
232,233,234,235,236,237,238,239,
240,241,242,243,244,245,246,215,
248,249,250,251,252,253,254,223,
224,225,226,227,228,229,230,231,
232,233,234,235,236,237,238,239,
240,241,242,243,244,245,246,247,
248,249,250,251,252,253,254,255,
0,1,2,3,4,5,6,7,
8,9,10,11,12,13,14,15,
16,17,18,19,20,21,22,23,
24,25,26,27,28,29,30,31,
32,33,34,35,36,37,38,39,
40,41,42,43,44,45,46,47,
48,49,50,51,52,53,54,55,
56,57,58,59,60,61,62,63,
64,97,98,99,100,101,102,103,
104,105,106,107,108,109,110,111,
112,113,114,115,116,117,118,119,
120,121,122,91,92,93,94,95,
96,65,66,67,68,69,70,71,
72,73,74,75,76,77,78,79,
80,81,82,83,84,85,86,87,
88,89,90,123,124,125,126,127,
128,129,130,131,132,133,134,135,
136,137,138,139,140,141,142,143,
144,145,146,147,148,149,150,151,
152,153,154,155,156,157,158,159,
160,161,162,163,164,165,166,167,
168,169,170,171,172,173,174,175,
176,177,178,179,180,181,182,183,
184,185,186,187,188,189,190,191,
224,225,226,227,228,229,230,231,
232,233,234,235,236,237,238,239,
240,241,242,243,244,245,246,215,
248,249,250,251,252,253,254,223,
192,193,194,195,196,197,198,199,
200,201,202,203,204,205,206,207,
208,209,210,211,212,213,214,247,
216,217,218,219,220,221,222,255,
0,62,0,0,1,0,0,0,
0,0,0,0,0,0,0,0,
32,0,0,0,1,0,0,0,
0,0,0,0,0,0,0,0,
0,0,0,0,0,0,255,3,
126,0,0,0,126,0,0,0,
0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,
0,0,0,0,0,0,255,3,
0,0,0,0,0,0,0,0,
0,0,0,0,0,0,12,2,
0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,
254,255,255,7,0,0,0,0,
0,0,0,0,0,0,0,0,
255,255,127,127,0,0,0,0,
0,0,0,0,0,0,0,0,
0,0,0,0,254,255,255,7,
0,0,0,0,0,4,32,4,
0,0,0,128,255,255,127,255,
0,0,0,0,0,0,255,3,
254,255,255,135,254,255,255,7,
0,0,0,0,0,4,44,6,
255,255,127,255,255,255,127,255,
0,0,0,0,254,255,255,255,
255,255,255,255,255,255,255,127,
0,0,0,0,254,255,255,255,
255,255,255,255,255,255,255,255,
0,2,0,0,255,255,255,255,
255,255,255,255,255,255,255,127,
0,0,0,0,255,255,255,255,
255,255,255,255,255,255,255,255,
0,0,0,0,254,255,0,252,
1,0,0,248,1,0,0,120,
0,0,0,0,254,255,255,255,
0,0,128,0,0,0,128,0,
255,255,255,255,0,0,0,0,
0,0,0,0,0,0,0,128,
255,255,255,255,0,0,0,0,
0,0,0,0,0,0,0,0,
128,0,0,0,0,0,0,0,
0,1,1,0,1,1,0,0,
0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,
1,0,0,0,128,0,0,0,
128,128,128,128,0,0,128,0,
28,28,28,28,28,28,28,28,
28,28,0,0,0,0,0,128,
0,26,26,26,26,26,26,18,
18,18,18,18,18,18,18,18,
18,18,18,18,18,18,18,18,
18,18,18,128,128,0,128,16,
0,26,26,26,26,26,26,18,
18,18,18,18,18,18,18,18,
18,18,18,18,18,18,18,18,
18,18,18,128,128,0,0,0,
0,0,0,0,0,1,0,0,
0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,
1,0,0,0,0,0,0,0,
0,0,18,0,0,0,0,0,
0,0,20,20,0,18,0,0,
0,20,18,0,0,0,0,0,
18,18,18,18,18,18,18,18,
18,18,18,18,18,18,18,18,
18,18,18,18,18,18,18,0,
18,18,18,18,18,18,18,18,
18,18,18,18,18,18,18,18,
18,18,18,18,18,18,18,18,
18,18,18,18,18,18,18,0,
18,18,18,18,18,18,18,18
};


#ifndef HAVE_STRERROR
/*************************************************
*     Provide strerror() for non-ANSI libraries  *
*************************************************/

/* Some old-fashioned systems still around (e.g. SunOS4) don't have strerror()
in their libraries, but can provide the same facility by this simple
alternative function. */

extern int   sys_nerr;
extern char *sys_errlist[];

char *
strerror(int n)
{
if (n < 0 || n >= sys_nerr) return "unknown error number";
return sys_errlist[n];
}
#endif /* HAVE_STRERROR */


/*************************************************
*         JIT memory callback                    *
*************************************************/

static pcre_jit_stack* jit_callback(void *arg)
{
return (pcre_jit_stack *)arg;
}


/*************************************************
*        Read or extend an input line            *
*************************************************/

/* Input lines are read into buffer, but both patterns and data lines can be
continued over multiple input lines. In addition, if the buffer fills up, we
want to automatically expand it so as to be able to handle extremely large
lines that are needed for certain stress tests. When the input buffer is
expanded, the other two buffers must also be expanded likewise, and the
contents of pbuffer, which are a copy of the input for callouts, must be
preserved (for when expansion happens for a data line). This is not the most
optimal way of handling this, but hey, this is just a test program!

Arguments:
  f            the file to read
  start        where in buffer to start (this *must* be within buffer)
  prompt       for stdin or readline()

Returns:       pointer to the start of new data
               could be a copy of start, or could be moved
               NULL if no data read and EOF reached
*/

static uschar *
extend_inputline(FILE *f, uschar *start, const char *prompt)
{
uschar *here = start;

for (;;)
  {
  int rlen = (int)(buffer_size - (here - buffer));

  if (rlen > 1000)
    {
    int dlen;

    /* If libreadline support is required, use readline() to read a line if the
    input is a terminal. Note that readline() removes the trailing newline, so
    we must put it back again, to be compatible with fgets(). */

#ifdef SUPPORT_LIBREADLINE
    if (isatty(fileno(f)))
      {
      size_t len;
      char *s = readline(prompt);
      if (s == NULL) return (here == start)? NULL : start;
      len = strlen(s);
      if (len > 0) add_history(s);
      if (len > rlen - 1) len = rlen - 1;
      memcpy(here, s, len);
      here[len] = '\n';
      here[len+1] = 0;
      free(s);
      }
    else
#endif

    /* Read the next line by normal means, prompting if the file is stdin. */

      {
      if (f == stdin) printf("%s", prompt);
      if (fgets((char *)here, rlen,  f) == NULL)
        return (here == start)? NULL : start;
      }

    dlen = (int)strlen((char *)here);
    if (dlen > 0 && here[dlen - 1] == '\n') return start;
    here += dlen;
    }

  else
    {
    int new_buffer_size = 2*buffer_size;
    uschar *new_buffer = (unsigned char *)malloc(new_buffer_size);
    uschar *new_dbuffer = (unsigned char *)malloc(new_buffer_size);
    uschar *new_pbuffer = (unsigned char *)malloc(new_buffer_size);

    if (new_buffer == NULL || new_dbuffer == NULL || new_pbuffer == NULL)
      {
      fprintf(stderr, "pcretest: malloc(%d) failed\n", new_buffer_size);
      exit(1);
      }

    memcpy(new_buffer, buffer, buffer_size);
    memcpy(new_pbuffer, pbuffer, buffer_size);

    buffer_size = new_buffer_size;

    start = new_buffer + (start - buffer);
    here = new_buffer + (here - buffer);

    free(buffer);
    free(dbuffer);
    free(pbuffer);

    buffer = new_buffer;
    dbuffer = new_dbuffer;
    pbuffer = new_pbuffer;
    }
  }

return NULL;  /* Control never gets here */
}


/*************************************************
*          Read number from string               *
*************************************************/

/* We don't use strtoul() because SunOS4 doesn't have it. Rather than mess
around with conditional compilation, just do the job by hand. It is only used
for unpicking arguments, so just keep it simple.

Arguments:
  str           string to be converted
  endptr        where to put the end pointer

Returns:        the unsigned long
*/

static int
get_value(unsigned char *str, unsigned char **endptr)
{
int result = 0;
while(*str != 0 && isspace(*str)) str++;
while (isdigit(*str)) result = result * 10 + (int)(*str++ - '0');
*endptr = str;
return(result);
}


/*************************************************
*            Convert UTF-8 string to value       *
*************************************************/

/* This function takes one or more bytes that represents a UTF-8 character,
and returns the value of the character.

Argument:
  utf8bytes   a pointer to the byte vector
  vptr        a pointer to an int to receive the value

Returns:      >  0 => the number of bytes consumed
              -6 to 0 => malformed UTF-8 character at offset = (-return)
*/

#if !defined NOUTF8

static int
utf82ord(unsigned char *utf8bytes, int *vptr)
{
int c = *utf8bytes++;
int d = c;
int i, j, s;

for (i = -1; i < 6; i++)               /* i is number of additional bytes */
  {
  if ((d & 0x80) == 0) break;
  d <<= 1;
  }

if (i == -1) { *vptr = c; return 1; }  /* ascii character */
if (i == 0 || i == 6) return 0;        /* invalid UTF-8 */

/* i now has a value in the range 1-5 */

s = 6*i;
d = (c & utf8_table3[i]) << s;

for (j = 0; j < i; j++)
  {
  c = *utf8bytes++;
  if ((c & 0xc0) != 0x80) return -(j+1);
  s -= 6;
  d |= (c & 0x3f) << s;
  }

/* Check that encoding was the correct unique one */

for (j = 0; j < utf8_table1_size; j++)
  if (d <= utf8_table1[j]) break;
if (j != i) return -(i+1);

/* Valid value */

*vptr = d;
return i+1;
}

#endif


/*************************************************
*       Convert character value to UTF-8         *
*************************************************/

/* This function takes an integer value in the range 0 - 0x7fffffff
and encodes it as a UTF-8 character in 0 to 6 bytes.

Arguments:
  cvalue     the character value
  utf8bytes  pointer to buffer for result - at least 6 bytes long

Returns:     number of characters placed in the buffer
*/

#if !defined NOUTF8

static int
ord2utf8(int cvalue, uschar *utf8bytes)
{
register int i, j;
for (i = 0; i < utf8_table1_size; i++)
  if (cvalue <= utf8_table1[i]) break;
utf8bytes += i;
for (j = i; j > 0; j--)
 {
 *utf8bytes-- = 0x80 | (cvalue & 0x3f);
 cvalue >>= 6;
 }
*utf8bytes = utf8_table2[i] | cvalue;
return i + 1;
}

#endif


/*************************************************
*             Print character string             *
*************************************************/

/* Character string printing function. Must handle UTF-8 strings in utf8
mode. Yields number of characters printed. If handed a NULL file, just counts
chars without printing. */

static int pchars(unsigned char *p, int length, FILE *f)
{
int c = 0;
int yield = 0;

while (length-- > 0)
  {
#if !defined NOUTF8
  if (use_utf8)
    {
    int rc = utf82ord(p, &c);

    if (rc > 0 && rc <= length + 1)   /* Mustn't run over the end */
      {
      length -= rc - 1;
      p += rc;
      if (PRINTHEX(c))
        {
        if (f != NULL) fprintf(f, "%c", c);
        yield++;
        }
      else
        {
        int n = 4;
        if (f != NULL) fprintf(f, "\\x{%02x}", c);
        yield += (n <= 0x000000ff)? 2 :
                 (n <= 0x00000fff)? 3 :
                 (n <= 0x0000ffff)? 4 :
                 (n <= 0x000fffff)? 5 : 6;
        }
      continue;
      }
    }
#endif

   /* Not UTF-8, or malformed UTF-8  */

  c = *p++;
  if (PRINTHEX(c))
    {
    if (f != NULL) fprintf(f, "%c", c);
    yield++;
    }
  else
    {
    if (f != NULL) fprintf(f, "\\x%02x", c);
    yield += 4;
    }
  }

return yield;
}


/*************************************************
*              Callout function                  *
*************************************************/

/* Called from PCRE as a result of the (?C) item. We print out where we are in
the match. Yield zero unless more callouts than the fail count, or the callout
data is not zero. */

static int callout(pcre_callout_block *cb)
{
FILE *f = (first_callout | callout_extra)? outfile : NULL;
int i, pre_start, post_start, subject_length;

if (callout_extra)
  {
  fprintf(f, "Callout %d: last capture = %d\n",
    cb->callout_number, cb->capture_last);

  for (i = 0; i < cb->capture_top * 2; i += 2)
    {
    if (cb->offset_vector[i] < 0)
      fprintf(f, "%2d: <unset>\n", i/2);
    else
      {
      fprintf(f, "%2d: ", i/2);
      (void)pchars((unsigned char *)cb->subject + cb->offset_vector[i],
        cb->offset_vector[i+1] - cb->offset_vector[i], f);
      fprintf(f, "\n");
      }
    }
  }

/* Re-print the subject in canonical form, the first time or if giving full
datails. On subsequent calls in the same match, we use pchars just to find the
printed lengths of the substrings. */

if (f != NULL) fprintf(f, "--->");

pre_start = pchars((unsigned char *)cb->subject, cb->start_match, f);
post_start = pchars((unsigned char *)(cb->subject + cb->start_match),
  cb->current_position - cb->start_match, f);

subject_length = pchars((unsigned char *)cb->subject, cb->subject_length, NULL);

(void)pchars((unsigned char *)(cb->subject + cb->current_position),
  cb->subject_length - cb->current_position, f);

if (f != NULL) fprintf(f, "\n");

/* Always print appropriate indicators, with callout number if not already
shown. For automatic callouts, show the pattern offset. */

if (cb->callout_number == 255)
  {
  fprintf(outfile, "%+3d ", cb->pattern_position);
  if (cb->pattern_position > 99) fprintf(outfile, "\n    ");
  }
else
  {
  if (callout_extra) fprintf(outfile, "    ");
    else fprintf(outfile, "%3d ", cb->callout_number);
  }

for (i = 0; i < pre_start; i++) fprintf(outfile, " ");
fprintf(outfile, "^");

if (post_start > 0)
  {
  for (i = 0; i < post_start - 1; i++) fprintf(outfile, " ");
  fprintf(outfile, "^");
  }

for (i = 0; i < subject_length - pre_start - post_start + 4; i++)
  fprintf(outfile, " ");

fprintf(outfile, "%.*s", (cb->next_item_length == 0)? 1 : cb->next_item_length,
  pbuffer + cb->pattern_position);

fprintf(outfile, "\n");
first_callout = 0;

if (cb->mark != last_callout_mark)
  {
  fprintf(outfile, "Latest Mark: %s\n",
    (cb->mark == NULL)? "<unset>" : (char *)(cb->mark));
  last_callout_mark = cb->mark;
  }

if (cb->callout_data != NULL)
  {
  int callout_data = *((int *)(cb->callout_data));
  if (callout_data != 0)
    {
    fprintf(outfile, "Callout data = %d\n", callout_data);
    return callout_data;
    }
  }

return (cb->callout_number != callout_fail_id)? 0 :
       (++callout_count >= callout_fail_count)? 1 : 0;
}


/*************************************************
*            Local malloc functions              *
*************************************************/

/* Alternative malloc function, to test functionality and save the size of a
compiled re, which is the first store request that pcre_compile() makes. The
show_malloc variable is set only during matching. */

static void *new_malloc(size_t size)
{
void *block = malloc(size);
gotten_store = size;
if (first_gotten_store == 0) first_gotten_store = size;
if (show_malloc)
  fprintf(outfile, "malloc       %3d %p\n", (int)size, block);
return block;
}

static void new_free(void *block)
{
if (show_malloc)
  fprintf(outfile, "free             %p\n", block);
free(block);
}

/* For recursion malloc/free, to test stacking calls */

static void *stack_malloc(size_t size)
{
void *block = malloc(size);
if (show_malloc)
  fprintf(outfile, "stack_malloc %3d %p\n", (int)size, block);
return block;
}

static void stack_free(void *block)
{
if (show_malloc)
  fprintf(outfile, "stack_free       %p\n", block);
free(block);
}


/*************************************************
*          Call pcre_fullinfo()                  *
*************************************************/

/* Get one piece of information from the pcre_fullinfo() function */

static void new_info(pcre *re, pcre_extra *study, int option, void *ptr)
{
int rc;
if ((rc = pcre_fullinfo(re, study, option, ptr)) < 0)
  fprintf(outfile, "Error %d from pcre_fullinfo(%d)\n", rc, option);
}


/*************************************************
*         Byte flipping function                 *
*************************************************/

static unsigned long int
byteflip(unsigned long int value, int n)
{
if (n == 2) return ((value & 0x00ff) << 8) | ((value & 0xff00) >> 8);
return ((value & 0x000000ff) << 24) |
       ((value & 0x0000ff00) <<  8) |
       ((value & 0x00ff0000) >>  8) |
       ((value & 0xff000000) >> 24);
}


/*************************************************
*        Check match or recursion limit          *
*************************************************/

static int
check_match_limit(pcre *re, pcre_extra *extra, uschar *bptr, int len,
  int start_offset, int options, int *use_offsets, int use_size_offsets,
  int flag, unsigned long int *limit, int errnumber, const char *msg)
{
int count;
int min = 0;
int mid = 64;
int max = -1;

extra->flags |= flag;

for (;;)
  {
  *limit = mid;

  count = pcre_exec(re, extra, (char *)bptr, len, start_offset, options,
    use_offsets, use_size_offsets);

  if (count == errnumber)
    {
    /* fprintf(outfile, "Testing %s limit = %d\n", msg, mid); */
    min = mid;
    mid = (mid == max - 1)? max : (max > 0)? (min + max)/2 : mid*2;
    }

  else if (count >= 0 || count == PCRE_ERROR_NOMATCH ||
                         count == PCRE_ERROR_PARTIAL)
    {
    if (mid == min + 1)
      {
      fprintf(outfile, "Minimum %s limit = %d\n", msg, mid);
      break;
      }
    /* fprintf(outfile, "Testing %s limit = %d\n", msg, mid); */
    max = mid;
    mid = (min + mid)/2;
    }
  else break;    /* Some other error */
  }

extra->flags &= ~flag;
return count;
}


/*************************************************
*         Case-independent strncmp() function    *
*************************************************/

/*
Arguments:
  s         first string
  t         second string
  n         number of characters to compare

Returns:    < 0, = 0, or > 0, according to the comparison
*/

static int
strncmpic(uschar *s, uschar *t, int n)
{
while (n--)
  {
  int c = tolower(*s++) - tolower(*t++);
  if (c) return c;
  }
return 0;
}


/*************************************************
*         Check newline indicator                *
*************************************************/

/* This is used both at compile and run-time to check for <xxx> escapes. Print
a message and return 0 if there is no match.

Arguments:
  p           points after the leading '<'
  f           file for error message

Returns:      appropriate PCRE_NEWLINE_xxx flags, or 0
*/

static int
check_newline(uschar *p, FILE *f)
{
if (strncmpic(p, (uschar *)"cr>", 3) == 0) return PCRE_NEWLINE_CR;
if (strncmpic(p, (uschar *)"lf>", 3) == 0) return PCRE_NEWLINE_LF;
if (strncmpic(p, (uschar *)"crlf>", 5) == 0) return PCRE_NEWLINE_CRLF;
if (strncmpic(p, (uschar *)"anycrlf>", 8) == 0) return PCRE_NEWLINE_ANYCRLF;
if (strncmpic(p, (uschar *)"any>", 4) == 0) return PCRE_NEWLINE_ANY;
if (strncmpic(p, (uschar *)"bsr_anycrlf>", 12) == 0) return PCRE_BSR_ANYCRLF;
if (strncmpic(p, (uschar *)"bsr_unicode>", 12) == 0) return PCRE_BSR_UNICODE;
fprintf(f, "Unknown newline type at: <%s\n", p);
return 0;
}


/*************************************************
*             Usage function                     *
*************************************************/

static void
usage(void)
{
printf("Usage:     pcretest [options] [<input file> [<output file>]]\n\n");
printf("Input and output default to stdin and stdout.\n");
#ifdef SUPPORT_LIBREADLINE
printf("If input is a terminal, readline() is used to read from it.\n");
#else
printf("This version of pcretest is not linked with readline().\n");
#endif
printf("\nOptions:\n");
printf("  -b       show compiled code (bytecode)\n");
printf("  -C       show PCRE compile-time options and exit\n");
printf("  -d       debug: show compiled code and information (-b and -i)\n");
#if !defined NODFA
printf("  -dfa     force DFA matching for all subjects\n");
#endif
printf("  -help    show usage information\n");
printf("  -i       show information about compiled patterns\n"
       "  -M       find MATCH_LIMIT minimum for each subject\n"
       "  -m       output memory used information\n"
       "  -o <n>   set size of offsets vector to <n>\n");
#if !defined NOPOSIX
printf("  -p       use POSIX interface\n");
#endif
printf("  -q       quiet: do not output PCRE version number at start\n");
printf("  -S <n>   set stack size to <n> megabytes\n");
printf("  -s       force each pattern to be studied at basic level\n"
       "  -s+      force each pattern to be studied, using JIT if available\n"
       "  -t       time compilation and execution\n");
printf("  -t <n>   time compilation and execution, repeating <n> times\n");
printf("  -tm      time execution (matching) only\n");
printf("  -tm <n>  time execution (matching) only, repeating <n> times\n");
}


/*************************************************
*                Main Program                    *
*************************************************/

/* Read lines from named file or stdin and write to named file or stdout; lines
consist of a regular expression, in delimiters and optionally followed by
options, followed by a set of test data, terminated by an empty line. */

int main(int argc, char **argv)
{
FILE *infile = stdin;
int options = 0;
int study_options = 0;
int default_find_match_limit = FALSE;
int op = 1;
int timeit = 0;
int timeitm = 0;
int showinfo = 0;
int showstore = 0;
int force_study = -1;
int force_study_options = 0;
int quiet = 0;
int size_offsets = 45;
int size_offsets_max;
int *offsets = NULL;
#if !defined NOPOSIX
int posix = 0;
#endif
int debug = 0;
int done = 0;
int all_use_dfa = 0;
int yield = 0;
int stack_size;

pcre_jit_stack *jit_stack = NULL;


/* These vectors store, end-to-end, a list of captured substring names. Assume
that 1024 is plenty long enough for the few names we'll be testing. */

uschar copynames[1024];
uschar getnames[1024];

uschar *copynamesptr;
uschar *getnamesptr;

/* Get buffers from malloc() so that Electric Fence will check their misuse
when I am debugging. They grow automatically when very long lines are read. */

buffer = (unsigned char *)malloc(buffer_size);
dbuffer = (unsigned char *)malloc(buffer_size);
pbuffer = (unsigned char *)malloc(buffer_size);

/* The outfile variable is static so that new_malloc can use it. */

outfile = stdout;

/* The following  _setmode() stuff is some Windows magic that tells its runtime
library to translate CRLF into a single LF character. At least, that's what
I've been told: never having used Windows I take this all on trust. Originally
it set 0x8000, but then I was advised that _O_BINARY was better. */

#if defined(_WIN32) || defined(WIN32)
_setmode( _fileno( stdout ), _O_BINARY );
#endif

/* Scan options */

while (argc > 1 && argv[op][0] == '-')
  {
  unsigned char *endptr;

  if (strcmp(argv[op], "-m") == 0) showstore = 1;
  else if (strcmp(argv[op], "-s") == 0) force_study = 0;
  else if (strcmp(argv[op], "-s+") == 0)
    {
    force_study = 1;
    force_study_options = PCRE_STUDY_JIT_COMPILE;
    }
  else if (strcmp(argv[op], "-q") == 0) quiet = 1;
  else if (strcmp(argv[op], "-b") == 0) debug = 1;
  else if (strcmp(argv[op], "-i") == 0) showinfo = 1;
  else if (strcmp(argv[op], "-d") == 0) showinfo = debug = 1;
  else if (strcmp(argv[op], "-M") == 0) default_find_match_limit = TRUE;
#if !defined NODFA
  else if (strcmp(argv[op], "-dfa") == 0) all_use_dfa = 1;
#endif
  else if (strcmp(argv[op], "-o") == 0 && argc > 2 &&
      ((size_offsets = get_value((unsigned char *)argv[op+1], &endptr)),
        *endptr == 0))
    {
    op++;
    argc--;
    }
  else if (strcmp(argv[op], "-t") == 0 || strcmp(argv[op], "-tm") == 0)
    {
    int both = argv[op][2] == 0;
    int temp;
    if (argc > 2 && (temp = get_value((unsigned char *)argv[op+1], &endptr),
                     *endptr == 0))
      {
      timeitm = temp;
      op++;
      argc--;
      }
    else timeitm = LOOPREPEAT;
    if (both) timeit = timeitm;
    }
  else if (strcmp(argv[op], "-S") == 0 && argc > 2 &&
      ((stack_size = get_value((unsigned char *)argv[op+1], &endptr)),
        *endptr == 0))
    {
#if defined(_WIN32) || defined(WIN32) || defined(__minix)
    printf("PCRE: -S not supported on this OS\n");
    exit(1);
#else
    int rc;
    struct rlimit rlim;
    getrlimit(RLIMIT_STACK, &rlim);
    rlim.rlim_cur = stack_size * 1024 * 1024;
    rc = setrlimit(RLIMIT_STACK, &rlim);
    if (rc != 0)
      {
    printf("PCRE: setrlimit() failed with error %d\n", rc);
    exit(1);
      }
    op++;
    argc--;
#endif
    }
#if !defined NOPOSIX
  else if (strcmp(argv[op], "-p") == 0) posix = 1;
#endif
  else if (strcmp(argv[op], "-C") == 0)
    {
    int rc;
    unsigned long int lrc;
    printf("PCRE version %s\n", pcre_version());
    printf("Compiled with\n");
    (void)pcre_config(PCRE_CONFIG_UTF8, &rc);
    printf("  %sUTF-8 support\n", rc? "" : "No ");
    (void)pcre_config(PCRE_CONFIG_UNICODE_PROPERTIES, &rc);
    printf("  %sUnicode properties support\n", rc? "" : "No ");
    (void)pcre_config(PCRE_CONFIG_JIT, &rc);
    if (rc)
      printf("  Just-in-time compiler support\n");
    else
      printf("  No just-in-time compiler support\n");
    (void)pcre_config(PCRE_CONFIG_NEWLINE, &rc);
    /* Note that these values are always the ASCII values, even
    in EBCDIC environments. CR is 13 and NL is 10. */
    printf("  Newline sequence is %s\n", (rc == 13)? "CR" :
      (rc == 10)? "LF" : (rc == (13<<8 | 10))? "CRLF" :
      (rc == -2)? "ANYCRLF" :
      (rc == -1)? "ANY" : "???");
    (void)pcre_config(PCRE_CONFIG_BSR, &rc);
    printf("  \\R matches %s\n", rc? "CR, LF, or CRLF only" :
                                     "all Unicode newlines");
    (void)pcre_config(PCRE_CONFIG_LINK_SIZE, &rc);
    printf("  Internal link size = %d\n", rc);
    (void)pcre_config(PCRE_CONFIG_POSIX_MALLOC_THRESHOLD, &rc);
    printf("  POSIX malloc threshold = %d\n", rc);
    (void)pcre_config(PCRE_CONFIG_MATCH_LIMIT, &lrc);
    printf("  Default match limit = %ld\n", lrc);
    (void)pcre_config(PCRE_CONFIG_MATCH_LIMIT_RECURSION, &lrc);
    printf("  Default recursion depth limit = %ld\n", lrc);
    (void)pcre_config(PCRE_CONFIG_STACKRECURSE, &rc);
    printf("  Match recursion uses %s\n", rc? "stack" : "heap");
    goto EXIT;
    }
  else if (strcmp(argv[op], "-help") == 0 ||
           strcmp(argv[op], "--help") == 0)
    {
    usage();
    goto EXIT;
    }
  else
    {
    printf("** Unknown or malformed option %s\n", argv[op]);
    usage();
    yield = 1;
    goto EXIT;
    }
  op++;
  argc--;
  }

/* Get the store for the offsets vector, and remember what it was */

size_offsets_max = size_offsets;
offsets = (int *)malloc(size_offsets_max * sizeof(int));
if (offsets == NULL)
  {
  printf("** Failed to get %d bytes of memory for offsets vector\n",
    (int)(size_offsets_max * sizeof(int)));
  yield = 1;
  goto EXIT;
  }

/* Sort out the input and output files */

if (argc > 1)
  {
  infile = fopen(argv[op], INPUT_MODE);
  if (infile == NULL)
    {
    printf("** Failed to open %s\n", argv[op]);
    yield = 1;
    goto EXIT;
    }
  }

if (argc > 2)
  {
  outfile = fopen(argv[op+1], OUTPUT_MODE);
  if (outfile == NULL)
    {
    printf("** Failed to open %s\n", argv[op+1]);
    yield = 1;
    goto EXIT;
    }
  }

/* Set alternative malloc function */

pcre_malloc = new_malloc;
pcre_free = new_free;
pcre_stack_malloc = stack_malloc;
pcre_stack_free = stack_free;

/* Heading line unless quiet, then prompt for first regex if stdin */

if (!quiet) fprintf(outfile, "PCRE version %s\n\n", pcre_version());

/* Main loop */

while (!done)
  {
  pcre *re = NULL;
  pcre_extra *extra = NULL;

#if !defined NOPOSIX  /* There are still compilers that require no indent */
  regex_t preg;
  int do_posix = 0;
#endif

  const char *error;
  unsigned char *markptr;
  unsigned char *p, *pp, *ppp;
  unsigned char *to_file = NULL;
  const unsigned char *tables = NULL;
  unsigned long int true_size, true_study_size = 0;
  size_t size, regex_gotten_store;
  int do_allcaps = 0;
  int do_mark = 0;
  int do_study = 0;
  int no_force_study = 0;
  int do_debug = debug;
  int do_G = 0;
  int do_g = 0;
  int do_showinfo = showinfo;
  int do_showrest = 0;
  int do_showcaprest = 0;
  int do_flip = 0;
  int erroroffset, len, delimiter, poffset;

  use_utf8 = 0;
  debug_lengths = 1;

  if (extend_inputline(infile, buffer, "  re> ") == NULL) break;
  if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
  fflush(outfile);

  p = buffer;
  while (isspace(*p)) p++;
  if (*p == 0) continue;

  /* See if the pattern is to be loaded pre-compiled from a file. */

  if (*p == '<' && strchr((char *)(p+1), '<') == NULL)
    {
    unsigned long int magic, get_options;
    uschar sbuf[8];
    FILE *f;

    p++;
    pp = p + (int)strlen((char *)p);
    while (isspace(pp[-1])) pp--;
    *pp = 0;

    f = fopen((char *)p, "rb");
    if (f == NULL)
      {
      fprintf(outfile, "Failed to open %s: %s\n", p, strerror(errno));
      continue;
      }

    if (fread(sbuf, 1, 8, f) != 8) goto FAIL_READ;

    true_size =
      (sbuf[0] << 24) | (sbuf[1] << 16) | (sbuf[2] << 8) | sbuf[3];
    true_study_size =
      (sbuf[4] << 24) | (sbuf[5] << 16) | (sbuf[6] << 8) | sbuf[7];

    re = (real_pcre *)new_malloc(true_size);
    regex_gotten_store = first_gotten_store;

    if (fread(re, 1, true_size, f) != true_size) goto FAIL_READ;

    magic = ((real_pcre *)re)->magic_number;
    if (magic != MAGIC_NUMBER)
      {
      if (byteflip(magic, sizeof(magic)) == MAGIC_NUMBER)
        {
        do_flip = 1;
        }
      else
        {
        fprintf(outfile, "Data in %s is not a compiled PCRE regex\n", p);
        fclose(f);
        continue;
        }
      }

    fprintf(outfile, "Compiled pattern%s loaded from %s\n",
      do_flip? " (byte-inverted)" : "", p);

    /* Need to know if UTF-8 for printing data strings */

    new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options);
    use_utf8 = (get_options & PCRE_UTF8) != 0;

    /* Now see if there is any following study data. */

    if (true_study_size != 0)
      {
      pcre_study_data *psd;

      extra = (pcre_extra *)new_malloc(sizeof(pcre_extra) + true_study_size);
      extra->flags = PCRE_EXTRA_STUDY_DATA;

      psd = (pcre_study_data *)(((char *)extra) + sizeof(pcre_extra));
      extra->study_data = psd;

      if (fread(psd, 1, true_study_size, f) != true_study_size)
        {
        FAIL_READ:
        fprintf(outfile, "Failed to read data from %s\n", p);
        if (extra != NULL) pcre_free_study(extra);
        if (re != NULL) new_free(re);
        fclose(f);
        continue;
        }
      fprintf(outfile, "Study data loaded from %s\n", p);
      do_study = 1;     /* To get the data output if requested */
      }
    else fprintf(outfile, "No study data\n");

    fclose(f);
    goto SHOW_INFO;
    }

  /* In-line pattern (the usual case). Get the delimiter and seek the end of
  the pattern; if is isn't complete, read more. */

  delimiter = *p++;

  if (isalnum(delimiter) || delimiter == '\\')
    {
    fprintf(outfile, "** Delimiter must not be alphanumeric or \\\n");
    goto SKIP_DATA;
    }

  pp = p;
  poffset = (int)(p - buffer);

  for(;;)
    {
    while (*pp != 0)
      {
      if (*pp == '\\' && pp[1] != 0) pp++;
        else if (*pp == delimiter) break;
      pp++;
      }
    if (*pp != 0) break;
    if ((pp = extend_inputline(infile, pp, "    > ")) == NULL)
      {
      fprintf(outfile, "** Unexpected EOF\n");
      done = 1;
      goto CONTINUE;
      }
    if (infile != stdin) fprintf(outfile, "%s", (char *)pp);
    }

  /* The buffer may have moved while being extended; reset the start of data
  pointer to the correct relative point in the buffer. */

  p = buffer + poffset;

  /* If the first character after the delimiter is backslash, make
  the pattern end with backslash. This is purely to provide a way
  of testing for the error message when a pattern ends with backslash. */

  if (pp[1] == '\\') *pp++ = '\\';

  /* Terminate the pattern at the delimiter, and save a copy of the pattern
  for callouts. */

  *pp++ = 0;
  strcpy((char *)pbuffer, (char *)p);

  /* Look for options after final delimiter */

  options = 0;
  study_options = 0;
  log_store = showstore;  /* default from command line */

  while (*pp != 0)
    {
    switch (*pp++)
      {
      case 'f': options |= PCRE_FIRSTLINE; break;
      case 'g': do_g = 1; break;
      case 'i': options |= PCRE_CASELESS; break;
      case 'm': options |= PCRE_MULTILINE; break;
      case 's': options |= PCRE_DOTALL; break;
      case 'x': options |= PCRE_EXTENDED; break;

      case '+':
      if (do_showrest) do_showcaprest = 1; else do_showrest = 1;
      break;

      case '=': do_allcaps = 1; break;
      case 'A': options |= PCRE_ANCHORED; break;
      case 'B': do_debug = 1; break;
      case 'C': options |= PCRE_AUTO_CALLOUT; break;
      case 'D': do_debug = do_showinfo = 1; break;
      case 'E': options |= PCRE_DOLLAR_ENDONLY; break;
      case 'F': do_flip = 1; break;
      case 'G': do_G = 1; break;
      case 'I': do_showinfo = 1; break;
      case 'J': options |= PCRE_DUPNAMES; break;
      case 'K': do_mark = 1; break;
      case 'M': log_store = 1; break;
      case 'N': options |= PCRE_NO_AUTO_CAPTURE; break;

#if !defined NOPOSIX
      case 'P': do_posix = 1; break;
#endif

      case 'S':
      if (do_study == 0)
        {
        do_study = 1;
        if (*pp == '+')
          {
          study_options |= PCRE_STUDY_JIT_COMPILE;
          pp++;
          }
        }
      else
        {
        do_study = 0;
        no_force_study = 1;
        }
      break;

      case 'U': options |= PCRE_UNGREEDY; break;
      case 'W': options |= PCRE_UCP; break;
      case 'X': options |= PCRE_EXTRA; break;
      case 'Y': options |= PCRE_NO_START_OPTIMISE; break;
      case 'Z': debug_lengths = 0; break;
      case '8': options |= PCRE_UTF8; use_utf8 = 1; break;
      case '?': options |= PCRE_NO_UTF8_CHECK; break;

      case 'T':
      switch (*pp++)
        {
        case '0': tables = tables0; break;
        case '1': tables = tables1; break;

        case '\r':
        case '\n':
        case ' ':
        case 0:
        fprintf(outfile, "** Missing table number after /T\n");
        goto SKIP_DATA;

        default:
        fprintf(outfile, "** Bad table number \"%c\" after /T\n", pp[-1]);
        goto SKIP_DATA;
        }
      break;

      case 'L':
      ppp = pp;
      /* The '\r' test here is so that it works on Windows. */
      /* The '0' test is just in case this is an unterminated line. */
      while (*ppp != 0 && *ppp != '\n' && *ppp != '\r' && *ppp != ' ') ppp++;
      *ppp = 0;
      if (setlocale(LC_CTYPE, (const char *)pp) == NULL)
        {
        fprintf(outfile, "** Failed to set locale \"%s\"\n", pp);
        goto SKIP_DATA;
        }
      locale_set = 1;
      tables = pcre_maketables();
      pp = ppp;
      break;

      case '>':
      to_file = pp;
      while (*pp != 0) pp++;
      while (isspace(pp[-1])) pp--;
      *pp = 0;
      break;

      case '<':
        {
        if (strncmpic(pp, (uschar *)"JS>", 3) == 0)
          {
          options |= PCRE_JAVASCRIPT_COMPAT;
          pp += 3;
          }
        else
          {
          int x = check_newline(pp, outfile);
          if (x == 0) goto SKIP_DATA;
          options |= x;
          while (*pp++ != '>');
          }
        }
      break;

      case '\r':                      /* So that it works in Windows */
      case '\n':
      case ' ':
      break;

      default:
      fprintf(outfile, "** Unknown option '%c'\n", pp[-1]);
      goto SKIP_DATA;
      }
    }

  /* Handle compiling via the POSIX interface, which doesn't support the
  timing, showing, or debugging options, nor the ability to pass over
  local character tables. */

#if !defined NOPOSIX
  if (posix || do_posix)
    {
    int rc;
    int cflags = 0;

    if ((options & PCRE_CASELESS) != 0) cflags |= REG_ICASE;
    if ((options & PCRE_MULTILINE) != 0) cflags |= REG_NEWLINE;
    if ((options & PCRE_DOTALL) != 0) cflags |= REG_DOTALL;
    if ((options & PCRE_NO_AUTO_CAPTURE) != 0) cflags |= REG_NOSUB;
    if ((options & PCRE_UTF8) != 0) cflags |= REG_UTF8;
    if ((options & PCRE_UCP) != 0) cflags |= REG_UCP;
    if ((options & PCRE_UNGREEDY) != 0) cflags |= REG_UNGREEDY;

    first_gotten_store = 0;
    rc = regcomp(&preg, (char *)p, cflags);

    /* Compilation failed; go back for another re, skipping to blank line
    if non-interactive. */

    if (rc != 0)
      {
      (void)regerror(rc, &preg, (char *)buffer, buffer_size);
      fprintf(outfile, "Failed: POSIX code %d: %s\n", rc, buffer);
      goto SKIP_DATA;
      }
    }

  /* Handle compiling via the native interface */

  else
#endif  /* !defined NOPOSIX */

    {
    unsigned long int get_options;

    if (timeit > 0)
      {
      register int i;
      clock_t time_taken;
      clock_t start_time = clock();
      for (i = 0; i < timeit; i++)
        {
        re = pcre_compile((char *)p, options, &error, &erroroffset, tables);
        if (re != NULL) free(re);
        }
      time_taken = clock() - start_time;
      fprintf(outfile, "Compile time %.4f milliseconds\n",
        (((double)time_taken * 1000.0) / (double)timeit) /
          (double)CLOCKS_PER_SEC);
      }

    first_gotten_store = 0;
    re = pcre_compile((char *)p, options, &error, &erroroffset, tables);

    /* Compilation failed; go back for another re, skipping to blank line
    if non-interactive. */

    if (re == NULL)
      {
      fprintf(outfile, "Failed: %s at offset %d\n", error, erroroffset);
      SKIP_DATA:
      if (infile != stdin)
        {
        for (;;)
          {
          if (extend_inputline(infile, buffer, NULL) == NULL)
            {
            done = 1;
            goto CONTINUE;
            }
          len = (int)strlen((char *)buffer);
          while (len > 0 && isspace(buffer[len-1])) len--;
          if (len == 0) break;
          }
        fprintf(outfile, "\n");
        }
      goto CONTINUE;
      }

    /* Compilation succeeded. It is now possible to set the UTF-8 option from
    within the regex; check for this so that we know how to process the data
    lines. */

    new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options);
    if ((get_options & PCRE_UTF8) != 0) use_utf8 = 1;

    /* Extract the size for possible writing before possibly flipping it,
    and remember the store that was got. */

    true_size = ((real_pcre *)re)->size;
    regex_gotten_store = first_gotten_store;

    /* Output code size information if requested */

    if (log_store)
      fprintf(outfile, "Memory allocation (code space): %d\n",
        (int)(first_gotten_store -
              sizeof(real_pcre) -
              ((real_pcre *)re)->name_count * ((real_pcre *)re)->name_entry_size));

    /* If -s or /S was present, study the regex to generate additional info to
    help with the matching, unless the pattern has the SS option, which
    suppresses the effect of /S (used for a few test patterns where studying is
    never sensible). */

    if (do_study || (force_study >= 0 && !no_force_study))
      {
      if (timeit > 0)
        {
        register int i;
        clock_t time_taken;
        clock_t start_time = clock();
        for (i = 0; i < timeit; i++)
          extra = pcre_study(re, study_options | force_study_options, &error);
        time_taken = clock() - start_time;
        if (extra != NULL) pcre_free_study(extra);
        fprintf(outfile, "  Study time %.4f milliseconds\n",
          (((double)time_taken * 1000.0) / (double)timeit) /
            (double)CLOCKS_PER_SEC);
        }
      extra = pcre_study(re, study_options | force_study_options, &error);
      if (error != NULL)
        fprintf(outfile, "Failed to study: %s\n", error);
      else if (extra != NULL)
        {
        true_study_size = ((pcre_study_data *)(extra->study_data))->size;
        if (log_store)
          {
          size_t jitsize;
          new_info(re, extra, PCRE_INFO_JITSIZE, &jitsize);
          if (jitsize != 0)
            fprintf(outfile, "Memory allocation (JIT code): %d\n", jitsize);
          }
        }
      }

    /* If /K was present, we set up for handling MARK data. */

    if (do_mark)
      {
      if (extra == NULL)
        {
        extra = (pcre_extra *)malloc(sizeof(pcre_extra));
        extra->flags = 0;
        }
      extra->mark = &markptr;
      extra->flags |= PCRE_EXTRA_MARK;
      }

    /* If the 'F' option was present, we flip the bytes of all the integer
    fields in the regex data block and the study block. This is to make it
    possible to test PCRE's handling of byte-flipped patterns, e.g. those
    compiled on a different architecture. */

    if (do_flip)
      {
      real_pcre *rre = (real_pcre *)re;
      rre->magic_number =
        byteflip(rre->magic_number, sizeof(rre->magic_number));
      rre->size = byteflip(rre->size, sizeof(rre->size));
      rre->options = byteflip(rre->options, sizeof(rre->options));
      rre->flags = (pcre_uint16)byteflip(rre->flags, sizeof(rre->flags));
      rre->top_bracket =
        (pcre_uint16)byteflip(rre->top_bracket, sizeof(rre->top_bracket));
      rre->top_backref =
        (pcre_uint16)byteflip(rre->top_backref, sizeof(rre->top_backref));
      rre->first_byte =
        (pcre_uint16)byteflip(rre->first_byte, sizeof(rre->first_byte));
      rre->req_byte =
        (pcre_uint16)byteflip(rre->req_byte, sizeof(rre->req_byte));
      rre->name_table_offset = (pcre_uint16)byteflip(rre->name_table_offset,
        sizeof(rre->name_table_offset));
      rre->name_entry_size = (pcre_uint16)byteflip(rre->name_entry_size,
        sizeof(rre->name_entry_size));
      rre->name_count = (pcre_uint16)byteflip(rre->name_count,
        sizeof(rre->name_count));

      if (extra != NULL)
        {
        pcre_study_data *rsd = (pcre_study_data *)(extra->study_data);
        rsd->size = byteflip(rsd->size, sizeof(rsd->size));
        rsd->flags = byteflip(rsd->flags, sizeof(rsd->flags));
        rsd->minlength = byteflip(rsd->minlength, sizeof(rsd->minlength));
        }
      }

    /* Extract information from the compiled data if required. There are now
    two info-returning functions. The old one has a limited interface and
    returns only limited data. Check that it agrees with the newer one. */

    SHOW_INFO:

    if (do_debug)
      {
      fprintf(outfile, "------------------------------------------------------------------\n");
      pcre_printint(re, outfile, debug_lengths);
      }

    /* We already have the options in get_options (see above) */

    if (do_showinfo)
      {
      unsigned long int all_options;
#if !defined NOINFOCHECK
      int old_first_char, old_options, old_count;
#endif
      int count, backrefmax, first_char, need_char, okpartial, jchanged,
        hascrorlf;
      int nameentrysize, namecount;
      const uschar *nametable;

      new_info(re, NULL, PCRE_INFO_SIZE, &size);
      new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count);
      new_info(re, NULL, PCRE_INFO_BACKREFMAX, &backrefmax);
      new_info(re, NULL, PCRE_INFO_FIRSTBYTE, &first_char);
      new_info(re, NULL, PCRE_INFO_LASTLITERAL, &need_char);
      new_info(re, NULL, PCRE_INFO_NAMEENTRYSIZE, &nameentrysize);
      new_info(re, NULL, PCRE_INFO_NAMECOUNT, &namecount);
      new_info(re, NULL, PCRE_INFO_NAMETABLE, (void *)&nametable);
      new_info(re, NULL, PCRE_INFO_OKPARTIAL, &okpartial);
      new_info(re, NULL, PCRE_INFO_JCHANGED, &jchanged);
      new_info(re, NULL, PCRE_INFO_HASCRORLF, &hascrorlf);

#if !defined NOINFOCHECK
      old_count = pcre_info(re, &old_options, &old_first_char);
      if (count < 0) fprintf(outfile,
        "Error %d from pcre_info()\n", count);
      else
        {
        if (old_count != count) fprintf(outfile,
          "Count disagreement: pcre_fullinfo=%d pcre_info=%d\n", count,
            old_count);

        if (old_first_char != first_char) fprintf(outfile,
          "First char disagreement: pcre_fullinfo=%d pcre_info=%d\n",
            first_char, old_first_char);

        if (old_options != (int)get_options) fprintf(outfile,
          "Options disagreement: pcre_fullinfo=%ld pcre_info=%d\n",
            get_options, old_options);
        }
#endif

      if (size != regex_gotten_store) fprintf(outfile,
        "Size disagreement: pcre_fullinfo=%d call to malloc for %d\n",
        (int)size, (int)regex_gotten_store);

      fprintf(outfile, "Capturing subpattern count = %d\n", count);
      if (backrefmax > 0)
        fprintf(outfile, "Max back reference = %d\n", backrefmax);

      if (namecount > 0)
        {
        fprintf(outfile, "Named capturing subpatterns:\n");
        while (namecount-- > 0)
          {
          fprintf(outfile, "  %s %*s%3d\n", nametable + 2,
            nameentrysize - 3 - (int)strlen((char *)nametable + 2), "",
            GET2(nametable, 0));
          nametable += nameentrysize;
          }
        }

      if (!okpartial) fprintf(outfile, "Partial matching not supported\n");
      if (hascrorlf) fprintf(outfile, "Contains explicit CR or LF match\n");

      all_options = ((real_pcre *)re)->options;
      if (do_flip) all_options = byteflip(all_options, sizeof(all_options));

      if (get_options == 0) fprintf(outfile, "No options\n");
        else fprintf(outfile, "Options:%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
          ((get_options & PCRE_ANCHORED) != 0)? " anchored" : "",
          ((get_options & PCRE_CASELESS) != 0)? " caseless" : "",
          ((get_options & PCRE_EXTENDED) != 0)? " extended" : "",
          ((get_options & PCRE_MULTILINE) != 0)? " multiline" : "",
          ((get_options & PCRE_FIRSTLINE) != 0)? " firstline" : "",
          ((get_options & PCRE_DOTALL) != 0)? " dotall" : "",
          ((get_options & PCRE_BSR_ANYCRLF) != 0)? " bsr_anycrlf" : "",
          ((get_options & PCRE_BSR_UNICODE) != 0)? " bsr_unicode" : "",
          ((get_options & PCRE_DOLLAR_ENDONLY) != 0)? " dollar_endonly" : "",
          ((get_options & PCRE_EXTRA) != 0)? " extra" : "",
          ((get_options & PCRE_UNGREEDY) != 0)? " ungreedy" : "",
          ((get_options & PCRE_NO_AUTO_CAPTURE) != 0)? " no_auto_capture" : "",
          ((get_options & PCRE_UTF8) != 0)? " utf8" : "",
          ((get_options & PCRE_UCP) != 0)? " ucp" : "",
          ((get_options & PCRE_NO_UTF8_CHECK) != 0)? " no_utf8_check" : "",
          ((get_options & PCRE_NO_START_OPTIMIZE) != 0)? " no_start_optimize" : "",
          ((get_options & PCRE_DUPNAMES) != 0)? " dupnames" : "");

      if (jchanged) fprintf(outfile, "Duplicate name status changes\n");

      switch (get_options & PCRE_NEWLINE_BITS)
        {
        case PCRE_NEWLINE_CR:
        fprintf(outfile, "Forced newline sequence: CR\n");
        break;

        case PCRE_NEWLINE_LF:
        fprintf(outfile, "Forced newline sequence: LF\n");
        break;

        case PCRE_NEWLINE_CRLF:
        fprintf(outfile, "Forced newline sequence: CRLF\n");
        break;

        case PCRE_NEWLINE_ANYCRLF:
        fprintf(outfile, "Forced newline sequence: ANYCRLF\n");
        break;

        case PCRE_NEWLINE_ANY:
        fprintf(outfile, "Forced newline sequence: ANY\n");
        break;

        default:
        break;
        }

      if (first_char == -1)
        {
        fprintf(outfile, "First char at start or follows newline\n");
        }
      else if (first_char < 0)
        {
        fprintf(outfile, "No first char\n");
        }
      else
        {
        int ch = first_char & 255;
        const char *caseless = ((first_char & REQ_CASELESS) == 0)?
          "" : " (caseless)";
        if (PRINTHEX(ch))
          fprintf(outfile, "First char = \'%c\'%s\n", ch, caseless);
        else
          fprintf(outfile, "First char = %d%s\n", ch, caseless);
        }

      if (need_char < 0)
        {
        fprintf(outfile, "No need char\n");
        }
      else
        {
        int ch = need_char & 255;
        const char *caseless = ((need_char & REQ_CASELESS) == 0)?
          "" : " (caseless)";
        if (PRINTHEX(ch))
          fprintf(outfile, "Need char = \'%c\'%s\n", ch, caseless);
        else
          fprintf(outfile, "Need char = %d%s\n", ch, caseless);
        }

      /* Don't output study size; at present it is in any case a fixed
      value, but it varies, depending on the computer architecture, and
      so messes up the test suite. (And with the /F option, it might be
      flipped.) If study was forced by an external -s, don't show this
      information unless -i or -d was also present. This means that, except
      when auto-callouts are involved, the output from runs with and without
      -s should be identical. */

      if (do_study || (force_study >= 0 && showinfo && !no_force_study))
        {
        if (extra == NULL)
          fprintf(outfile, "Study returned NULL\n");
        else
          {
          uschar *start_bits = NULL;
          int minlength;

          new_info(re, extra, PCRE_INFO_MINLENGTH, &minlength);
          fprintf(outfile, "Subject length lower bound = %d\n", minlength);

          new_info(re, extra, PCRE_INFO_FIRSTTABLE, &start_bits);
          if (start_bits == NULL)
            fprintf(outfile, "No set of starting bytes\n");
          else
            {
            int i;
            int c = 24;
            fprintf(outfile, "Starting byte set: ");
            for (i = 0; i < 256; i++)
              {
              if ((start_bits[i/8] & (1<<(i&7))) != 0)
                {
                if (c > 75)
                  {
                  fprintf(outfile, "\n  ");
                  c = 2;
                  }
                if (PRINTHEX(i) && i != ' ')
                  {
                  fprintf(outfile, "%c ", i);
                  c += 2;
                  }
                else
                  {
                  fprintf(outfile, "\\x%02x ", i);
                  c += 5;
                  }
                }
              }
            fprintf(outfile, "\n");
            }
          }

        /* Show this only if the JIT was set by /S, not by -s. */

        if ((study_options & PCRE_STUDY_JIT_COMPILE) != 0)
          {
          int jit;
          new_info(re, extra, PCRE_INFO_JIT, &jit);
          if (jit)
            fprintf(outfile, "JIT study was successful\n");
          else
#ifdef SUPPORT_JIT
            fprintf(outfile, "JIT study was not successful\n");
#else
            fprintf(outfile, "JIT support is not available in this version of PCRE\n");
#endif
          }
        }
      }

    /* If the '>' option was present, we write out the regex to a file, and
    that is all. The first 8 bytes of the file are the regex length and then
    the study length, in big-endian order. */

    if (to_file != NULL)
      {
      FILE *f = fopen((char *)to_file, "wb");
      if (f == NULL)
        {
        fprintf(outfile, "Unable to open %s: %s\n", to_file, strerror(errno));
        }
      else
        {
        uschar sbuf[8];
        sbuf[0] = (uschar)((true_size >> 24) & 255);
        sbuf[1] = (uschar)((true_size >> 16) & 255);
        sbuf[2] = (uschar)((true_size >>  8) & 255);
        sbuf[3] = (uschar)((true_size) & 255);

        sbuf[4] = (uschar)((true_study_size >> 24) & 255);
        sbuf[5] = (uschar)((true_study_size >> 16) & 255);
        sbuf[6] = (uschar)((true_study_size >>  8) & 255);
        sbuf[7] = (uschar)((true_study_size) & 255);

        if (fwrite(sbuf, 1, 8, f) < 8 ||
            fwrite(re, 1, true_size, f) < true_size)
          {
          fprintf(outfile, "Write error on %s: %s\n", to_file, strerror(errno));
          }
        else
          {
          fprintf(outfile, "Compiled pattern written to %s\n", to_file);

          /* If there is study data, write it. */

          if (extra != NULL)
            {
            if (fwrite(extra->study_data, 1, true_study_size, f) <
                true_study_size)
              {
              fprintf(outfile, "Write error on %s: %s\n", to_file,
                strerror(errno));
              }
            else fprintf(outfile, "Study data written to %s\n", to_file);
            }
          }
        fclose(f);
        }

      new_free(re);
      if (extra != NULL) pcre_free_study(extra);
      if (locale_set)
        {
        new_free((void *)tables);
        setlocale(LC_CTYPE, "C");
        locale_set = 0;
        }
      continue;  /* With next regex */
      }
    }        /* End of non-POSIX compile */

  /* Read data lines and test them */

  for (;;)
    {
    uschar *q;
    uschar *bptr;
    int *use_offsets = offsets;
    int use_size_offsets = size_offsets;
    int callout_data = 0;
    int callout_data_set = 0;
    int count, c;
    int copystrings = 0;
    int find_match_limit = default_find_match_limit;
    int getstrings = 0;
    int getlist = 0;
    int gmatched = 0;
    int start_offset = 0;
    int start_offset_sign = 1;
    int g_notempty = 0;
    int use_dfa = 0;

    options = 0;

    *copynames = 0;
    *getnames = 0;

    copynamesptr = copynames;
    getnamesptr = getnames;

    pcre_callout = callout;
    first_callout = 1;
    last_callout_mark = NULL;
    callout_extra = 0;
    callout_count = 0;
    callout_fail_count = 999999;
    callout_fail_id = -1;
    show_malloc = 0;

    if (extra != NULL) extra->flags &=
      ~(PCRE_EXTRA_MATCH_LIMIT|PCRE_EXTRA_MATCH_LIMIT_RECURSION);

    len = 0;
    for (;;)
      {
      if (extend_inputline(infile, buffer + len, "data> ") == NULL)
        {
        if (len > 0)    /* Reached EOF without hitting a newline */
          {
          fprintf(outfile, "\n");
          break;
          }
        done = 1;
        goto CONTINUE;
        }
      if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
      len = (int)strlen((char *)buffer);
      if (buffer[len-1] == '\n') break;
      }

    while (len > 0 && isspace(buffer[len-1])) len--;
    buffer[len] = 0;
    if (len == 0) break;

    p = buffer;
    while (isspace(*p)) p++;

    bptr = q = dbuffer;
    while ((c = *p++) != 0)
      {
      int i = 0;
      int n = 0;

      if (c == '\\') switch ((c = *p++))
        {
        case 'a': c =    7; break;
        case 'b': c = '\b'; break;
        case 'e': c =   27; break;
        case 'f': c = '\f'; break;
        case 'n': c = '\n'; break;
        case 'r': c = '\r'; break;
        case 't': c = '\t'; break;
        case 'v': c = '\v'; break;

        case '0': case '1': case '2': case '3':
        case '4': case '5': case '6': case '7':
        c -= '0';
        while (i++ < 2 && isdigit(*p) && *p != '8' && *p != '9')
          c = c * 8 + *p++ - '0';

#if !defined NOUTF8
        if (use_utf8 && c > 255)
          {
          unsigned char buff8[8];
          int ii, utn;
          utn = ord2utf8(c, buff8);
          for (ii = 0; ii < utn - 1; ii++) *q++ = buff8[ii];
          c = buff8[ii];   /* Last byte */
          }
#endif
        break;

        case 'x':

        /* Handle \x{..} specially - new Perl thing for utf8 */

#if !defined NOUTF8
        if (*p == '{')
          {
          unsigned char *pt = p;
          c = 0;

          /* We used to have "while (isxdigit(*(++pt)))" here, but it fails
          when isxdigit() is a macro that refers to its argument more than
          once. This is banned by the C Standard, but apparently happens in at
          least one MacOS environment. */

          for (pt++; isxdigit(*pt); pt++)
            c = c * 16 + tolower(*pt) - ((isdigit(*pt))? '0' : 'a' - 10);
          if (*pt == '}')
            {
            unsigned char buff8[8];
            int ii, utn;
            if (use_utf8)
              {
              utn = ord2utf8(c, buff8);
              for (ii = 0; ii < utn - 1; ii++) *q++ = buff8[ii];
              c = buff8[ii];   /* Last byte */
              }
            else
             {
             if (c > 255)
               fprintf(outfile, "** Character \\x{%x} is greater than 255 and "
                 "UTF-8 mode is not enabled.\n"
                 "** Truncation will probably give the wrong result.\n", c);
             }
            p = pt + 1;
            break;
            }
          /* Not correct form; fall through */
          }
#endif

        /* Ordinary \x */

        c = 0;
        while (i++ < 2 && isxdigit(*p))
          {
          c = c * 16 + tolower(*p) - ((isdigit(*p))? '0' : 'a' - 10);
          p++;
          }
        break;

        case 0:   /* \ followed by EOF allows for an empty line */
        p--;
        continue;

        case '>':
        if (*p == '-')
          {
          start_offset_sign = -1;
          p++;
          }
        while(isdigit(*p)) start_offset = start_offset * 10 + *p++ - '0';
        start_offset *= start_offset_sign;
        continue;

        case 'A':  /* Option setting */
        options |= PCRE_ANCHORED;
        continue;

        case 'B':
        options |= PCRE_NOTBOL;
        continue;

        case 'C':
        if (isdigit(*p))    /* Set copy string */
          {
          while(isdigit(*p)) n = n * 10 + *p++ - '0';
          copystrings |= 1 << n;
          }
        else if (isalnum(*p))
          {
          uschar *npp = copynamesptr;
          while (isalnum(*p)) *npp++ = *p++;
          *npp++ = 0;
          *npp = 0;
          n = pcre_get_stringnumber(re, (char *)copynamesptr);
          if (n < 0)
            fprintf(outfile, "no parentheses with name \"%s\"\n", copynamesptr);
          copynamesptr = npp;
          }
        else if (*p == '+')
          {
          callout_extra = 1;
          p++;
          }
        else if (*p == '-')
          {
          pcre_callout = NULL;
          p++;
          }
        else if (*p == '!')
          {
          callout_fail_id = 0;
          p++;
          while(isdigit(*p))
            callout_fail_id = callout_fail_id * 10 + *p++ - '0';
          callout_fail_count = 0;
          if (*p == '!')
            {
            p++;
            while(isdigit(*p))
              callout_fail_count = callout_fail_count * 10 + *p++ - '0';
            }
          }
        else if (*p == '*')
          {
          int sign = 1;
          callout_data = 0;
          if (*(++p) == '-') { sign = -1; p++; }
          while(isdigit(*p))
            callout_data = callout_data * 10 + *p++ - '0';
          callout_data *= sign;
          callout_data_set = 1;
          }
        continue;

#if !defined NODFA
        case 'D':
#if !defined NOPOSIX
        if (posix || do_posix)
          printf("** Can't use dfa matching in POSIX mode: \\D ignored\n");
        else
#endif
          use_dfa = 1;
        continue;
#endif

#if !defined NODFA
        case 'F':
        options |= PCRE_DFA_SHORTEST;
        continue;
#endif

        case 'G':
        if (isdigit(*p))
          {
          while(isdigit(*p)) n = n * 10 + *p++ - '0';
          getstrings |= 1 << n;
          }
        else if (isalnum(*p))
          {
          uschar *npp = getnamesptr;
          while (isalnum(*p)) *npp++ = *p++;
          *npp++ = 0;
          *npp = 0;
          n = pcre_get_stringnumber(re, (char *)getnamesptr);
          if (n < 0)
            fprintf(outfile, "no parentheses with name \"%s\"\n", getnamesptr);
          getnamesptr = npp;
          }
        continue;

        case 'J':
        while(isdigit(*p)) n = n * 10 + *p++ - '0';
        if (extra != NULL
            && (extra->flags & PCRE_EXTRA_EXECUTABLE_JIT) != 0
            && extra->executable_jit != NULL)
          {
	  if (jit_stack != NULL) pcre_jit_stack_free(jit_stack);
	  jit_stack = pcre_jit_stack_alloc(1, n * 1024);
	  pcre_assign_jit_stack(extra, jit_callback, jit_stack);
          }
        continue;

        case 'L':
        getlist = 1;
        continue;

        case 'M':
        find_match_limit = 1;
        continue;

        case 'N':
        if ((options & PCRE_NOTEMPTY) != 0)
          options = (options & ~PCRE_NOTEMPTY) | PCRE_NOTEMPTY_ATSTART;
        else
          options |= PCRE_NOTEMPTY;
        continue;

        case 'O':
        while(isdigit(*p)) n = n * 10 + *p++ - '0';
        if (n > size_offsets_max)
          {
          size_offsets_max = n;
          free(offsets);
          use_offsets = offsets = (int *)malloc(size_offsets_max * sizeof(int));
          if (offsets == NULL)
            {
            printf("** Failed to get %d bytes of memory for offsets vector\n",
              (int)(size_offsets_max * sizeof(int)));
            yield = 1;
            goto EXIT;
            }
          }
        use_size_offsets = n;
        if (n == 0) use_offsets = NULL;   /* Ensures it can't write to it */
        continue;

        case 'P':
        options |= ((options & PCRE_PARTIAL_SOFT) == 0)?
          PCRE_PARTIAL_SOFT : PCRE_PARTIAL_HARD;
        continue;

        case 'Q':
        while(isdigit(*p)) n = n * 10 + *p++ - '0';
        if (extra == NULL)
          {
          extra = (pcre_extra *)malloc(sizeof(pcre_extra));
          extra->flags = 0;
          }
        extra->flags |= PCRE_EXTRA_MATCH_LIMIT_RECURSION;
        extra->match_limit_recursion = n;
        continue;

        case 'q':
        while(isdigit(*p)) n = n * 10 + *p++ - '0';
        if (extra == NULL)
          {
          extra = (pcre_extra *)malloc(sizeof(pcre_extra));
          extra->flags = 0;
          }
        extra->flags |= PCRE_EXTRA_MATCH_LIMIT;
        extra->match_limit = n;
        continue;

#if !defined NODFA
        case 'R':
        options |= PCRE_DFA_RESTART;
        continue;
#endif

        case 'S':
        show_malloc = 1;
        continue;

        case 'Y':
        options |= PCRE_NO_START_OPTIMIZE;
        continue;

        case 'Z':
        options |= PCRE_NOTEOL;
        continue;

        case '?':
        options |= PCRE_NO_UTF8_CHECK;
        continue;

        case '<':
          {
          int x = check_newline(p, outfile);
          if (x == 0) goto NEXT_DATA;
          options |= x;
          while (*p++ != '>');
          }
        continue;
        }
      *q++ = c;
      }
    *q = 0;
    len = (int)(q - dbuffer);

    /* Move the data to the end of the buffer so that a read over the end of
    the buffer will be seen by valgrind, even if it doesn't cause a crash. If
    we are using the POSIX interface, we must include the terminating zero. */

#if !defined NOPOSIX
    if (posix || do_posix)
      {
      memmove(bptr + buffer_size - len - 1, bptr, len + 1);
      bptr += buffer_size - len - 1;
      }
    else
#endif
      {
      memmove(bptr + buffer_size - len, bptr, len);
      bptr += buffer_size - len;
      }

    if ((all_use_dfa || use_dfa) && find_match_limit)
      {
      printf("**Match limit not relevant for DFA matching: ignored\n");
      find_match_limit = 0;
      }

    /* Handle matching via the POSIX interface, which does not
    support timing or playing with the match limit or callout data. */

#if !defined NOPOSIX
    if (posix || do_posix)
      {
      int rc;
      int eflags = 0;
      regmatch_t *pmatch = NULL;
      if (use_size_offsets > 0)
        pmatch = (regmatch_t *)malloc(sizeof(regmatch_t) * use_size_offsets);
      if ((options & PCRE_NOTBOL) != 0) eflags |= REG_NOTBOL;
      if ((options & PCRE_NOTEOL) != 0) eflags |= REG_NOTEOL;
      if ((options & PCRE_NOTEMPTY) != 0) eflags |= REG_NOTEMPTY;

      rc = regexec(&preg, (const char *)bptr, use_size_offsets, pmatch, eflags);

      if (rc != 0)
        {
        (void)regerror(rc, &preg, (char *)buffer, buffer_size);
        fprintf(outfile, "No match: POSIX code %d: %s\n", rc, buffer);
        }
      else if ((((const pcre *)preg.re_pcre)->options & PCRE_NO_AUTO_CAPTURE)
              != 0)
        {
        fprintf(outfile, "Matched with REG_NOSUB\n");
        }
      else
        {
        size_t i;
        for (i = 0; i < (size_t)use_size_offsets; i++)
          {
          if (pmatch[i].rm_so >= 0)
            {
            fprintf(outfile, "%2d: ", (int)i);
            (void)pchars(dbuffer + pmatch[i].rm_so,
              pmatch[i].rm_eo - pmatch[i].rm_so, outfile);
            fprintf(outfile, "\n");
            if (do_showcaprest || (i == 0 && do_showrest))
              {
              fprintf(outfile, "%2d+ ", (int)i);
              (void)pchars(dbuffer + pmatch[i].rm_eo, len - pmatch[i].rm_eo,
                outfile);
              fprintf(outfile, "\n");
              }
            }
          }
        }
      free(pmatch);
      }

    /* Handle matching via the native interface - repeats for /g and /G */

    else
#endif  /* !defined NOPOSIX */

    for (;; gmatched++)    /* Loop for /g or /G */
      {
      markptr = NULL;

      if (timeitm > 0)
        {
        register int i;
        clock_t time_taken;
        clock_t start_time = clock();

#if !defined NODFA
        if (all_use_dfa || use_dfa)
          {
          int workspace[1000];
          for (i = 0; i < timeitm; i++)
            count = pcre_dfa_exec(re, extra, (char *)bptr, len, start_offset,
              options | g_notempty, use_offsets, use_size_offsets, workspace,
              sizeof(workspace)/sizeof(int));
          }
        else
#endif

        for (i = 0; i < timeitm; i++)
          count = pcre_exec(re, extra, (char *)bptr, len,
            start_offset, options | g_notempty, use_offsets, use_size_offsets);

        time_taken = clock() - start_time;
        fprintf(outfile, "Execute time %.4f milliseconds\n",
          (((double)time_taken * 1000.0) / (double)timeitm) /
            (double)CLOCKS_PER_SEC);
        }

      /* If find_match_limit is set, we want to do repeated matches with
      varying limits in order to find the minimum value for the match limit and
      for the recursion limit. The match limits are relevant only to the normal
      running of pcre_exec(), so disable the JIT optimization. This makes it
      possible to run the same set of tests with and without JIT externally
      requested. */

      if (find_match_limit)
        {
        if (extra == NULL)
          {
          extra = (pcre_extra *)malloc(sizeof(pcre_extra));
          extra->flags = 0;
          }
        else extra->flags &= ~PCRE_EXTRA_EXECUTABLE_JIT;

        (void)check_match_limit(re, extra, bptr, len, start_offset,
          options|g_notempty, use_offsets, use_size_offsets,
          PCRE_EXTRA_MATCH_LIMIT, &(extra->match_limit),
          PCRE_ERROR_MATCHLIMIT, "match()");

        count = check_match_limit(re, extra, bptr, len, start_offset,
          options|g_notempty, use_offsets, use_size_offsets,
          PCRE_EXTRA_MATCH_LIMIT_RECURSION, &(extra->match_limit_recursion),
          PCRE_ERROR_RECURSIONLIMIT, "match() recursion");
        }

      /* If callout_data is set, use the interface with additional data */

      else if (callout_data_set)
        {
        if (extra == NULL)
          {
          extra = (pcre_extra *)malloc(sizeof(pcre_extra));
          extra->flags = 0;
          }
        extra->flags |= PCRE_EXTRA_CALLOUT_DATA;
        extra->callout_data = &callout_data;
        count = pcre_exec(re, extra, (char *)bptr, len, start_offset,
          options | g_notempty, use_offsets, use_size_offsets);
        extra->flags &= ~PCRE_EXTRA_CALLOUT_DATA;
        }

      /* The normal case is just to do the match once, with the default
      value of match_limit. */

#if !defined NODFA
      else if (all_use_dfa || use_dfa)
        {
        int workspace[1000];
        count = pcre_dfa_exec(re, extra, (char *)bptr, len, start_offset,
          options | g_notempty, use_offsets, use_size_offsets, workspace,
          sizeof(workspace)/sizeof(int));
        if (count == 0)
          {
          fprintf(outfile, "Matched, but too many subsidiary matches\n");
          count = use_size_offsets/2;
          }
        }
#endif

      else
        {
        count = pcre_exec(re, extra, (char *)bptr, len,
          start_offset, options | g_notempty, use_offsets, use_size_offsets);
        if (count == 0)
          {
          fprintf(outfile, "Matched, but too many substrings\n");
          count = use_size_offsets/3;
          }
        }

      /* Matched */

      if (count >= 0)
        {
        int i, maxcount;

#if !defined NODFA
        if (all_use_dfa || use_dfa) maxcount = use_size_offsets/2; else
#endif
          maxcount = use_size_offsets/3;

        /* This is a check against a lunatic return value. */

        if (count > maxcount)
          {
          fprintf(outfile,
            "** PCRE error: returned count %d is too big for offset size %d\n",
            count, use_size_offsets);
          count = use_size_offsets/3;
          if (do_g || do_G)
            {
            fprintf(outfile, "** /%c loop abandoned\n", do_g? 'g' : 'G');
            do_g = do_G = FALSE;        /* Break g/G loop */
            }
          }

        /* do_allcaps requests showing of all captures in the pattern, to check
        unset ones at the end. */

        if (do_allcaps)
          {
          new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count);
          count++;   /* Allow for full match */
          if (count * 2 > use_size_offsets) count = use_size_offsets/2;
          }

        /* Output the captured substrings */

        for (i = 0; i < count * 2; i += 2)
          {
          if (use_offsets[i] < 0)
            {
            if (use_offsets[i] != -1)
              fprintf(outfile, "ERROR: bad negative value %d for offset %d\n",
                use_offsets[i], i);
            if (use_offsets[i+1] != -1)
              fprintf(outfile, "ERROR: bad negative value %d for offset %d\n",
                use_offsets[i+1], i+1);
            fprintf(outfile, "%2d: <unset>\n", i/2);
            }
          else
            {
            fprintf(outfile, "%2d: ", i/2);
            (void)pchars(bptr + use_offsets[i],
              use_offsets[i+1] - use_offsets[i], outfile);
            fprintf(outfile, "\n");
            if (do_showcaprest || (i == 0 && do_showrest))
              {
              fprintf(outfile, "%2d+ ", i/2);
              (void)pchars(bptr + use_offsets[i+1], len - use_offsets[i+1],
                outfile);
              fprintf(outfile, "\n");
              }
            }
          }

        if (markptr != NULL) fprintf(outfile, "MK: %s\n", markptr);

        for (i = 0; i < 32; i++)
          {
          if ((copystrings & (1 << i)) != 0)
            {
            char copybuffer[256];
            int rc = pcre_copy_substring((char *)bptr, use_offsets, count,
              i, copybuffer, sizeof(copybuffer));
            if (rc < 0)
              fprintf(outfile, "copy substring %d failed %d\n", i, rc);
            else
              fprintf(outfile, "%2dC %s (%d)\n", i, copybuffer, rc);
            }
          }

        for (copynamesptr = copynames;
             *copynamesptr != 0;
             copynamesptr += (int)strlen((char*)copynamesptr) + 1)
          {
          char copybuffer[256];
          int rc = pcre_copy_named_substring(re, (char *)bptr, use_offsets,
            count, (char *)copynamesptr, copybuffer, sizeof(copybuffer));
          if (rc < 0)
            fprintf(outfile, "copy substring %s failed %d\n", copynamesptr, rc);
          else
            fprintf(outfile, "  C %s (%d) %s\n", copybuffer, rc, copynamesptr);
          }

        for (i = 0; i < 32; i++)
          {
          if ((getstrings & (1 << i)) != 0)
            {
            const char *substring;
            int rc = pcre_get_substring((char *)bptr, use_offsets, count,
              i, &substring);
            if (rc < 0)
              fprintf(outfile, "get substring %d failed %d\n", i, rc);
            else
              {
              fprintf(outfile, "%2dG %s (%d)\n", i, substring, rc);
              pcre_free_substring(substring);
              }
            }
          }

        for (getnamesptr = getnames;
             *getnamesptr != 0;
             getnamesptr += (int)strlen((char*)getnamesptr) + 1)
          {
          const char *substring;
          int rc = pcre_get_named_substring(re, (char *)bptr, use_offsets,
            count, (char *)getnamesptr, &substring);
          if (rc < 0)
            fprintf(outfile, "copy substring %s failed %d\n", getnamesptr, rc);
          else
            {
            fprintf(outfile, "  G %s (%d) %s\n", substring, rc, getnamesptr);
            pcre_free_substring(substring);
            }
          }

        if (getlist)
          {
          const char **stringlist;
          int rc = pcre_get_substring_list((char *)bptr, use_offsets, count,
            &stringlist);
          if (rc < 0)
            fprintf(outfile, "get substring list failed %d\n", rc);
          else
            {
            for (i = 0; i < count; i++)
              fprintf(outfile, "%2dL %s\n", i, stringlist[i]);
            if (stringlist[i] != NULL)
              fprintf(outfile, "string list not terminated by NULL\n");
            pcre_free_substring_list(stringlist);
            }
          }
        }

      /* There was a partial match */

      else if (count == PCRE_ERROR_PARTIAL)
        {
        if (markptr == NULL) fprintf(outfile, "Partial match");
          else fprintf(outfile, "Partial match, mark=%s", markptr);
        if (use_size_offsets > 1)
          {
          fprintf(outfile, ": ");
          pchars(bptr + use_offsets[0], use_offsets[1] - use_offsets[0],
            outfile);
          }
        fprintf(outfile, "\n");
        break;  /* Out of the /g loop */
        }

      /* Failed to match. If this is a /g or /G loop and we previously set
      g_notempty after a null match, this is not necessarily the end. We want
      to advance the start offset, and continue. We won't be at the end of the
      string - that was checked before setting g_notempty.

      Complication arises in the case when the newline convention is "any",
      "crlf", or "anycrlf". If the previous match was at the end of a line
      terminated by CRLF, an advance of one character just passes the \r,
      whereas we should prefer the longer newline sequence, as does the code in
      pcre_exec(). Fudge the offset value to achieve this. We check for a
      newline setting in the pattern; if none was set, use pcre_config() to
      find the default.

      Otherwise, in the case of UTF-8 matching, the advance must be one
      character, not one byte. */

      else
        {
        if (g_notempty != 0)
          {
          int onechar = 1;
          unsigned int obits = ((real_pcre *)re)->options;
          use_offsets[0] = start_offset;
          if ((obits & PCRE_NEWLINE_BITS) == 0)
            {
            int d;
            (void)pcre_config(PCRE_CONFIG_NEWLINE, &d);
            /* Note that these values are always the ASCII ones, even in
            EBCDIC environments. CR = 13, NL = 10. */
            obits = (d == 13)? PCRE_NEWLINE_CR :
                    (d == 10)? PCRE_NEWLINE_LF :
                    (d == (13<<8 | 10))? PCRE_NEWLINE_CRLF :
                    (d == -2)? PCRE_NEWLINE_ANYCRLF :
                    (d == -1)? PCRE_NEWLINE_ANY : 0;
            }
          if (((obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_ANY ||
               (obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_CRLF ||
               (obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_ANYCRLF)
              &&
              start_offset < len - 1 &&
              bptr[start_offset] == '\r' &&
              bptr[start_offset+1] == '\n')
            onechar++;
          else if (use_utf8)
            {
            while (start_offset + onechar < len)
              {
              if ((bptr[start_offset+onechar] & 0xc0) != 0x80) break;
              onechar++;
              }
            }
          use_offsets[1] = start_offset + onechar;
          }
        else
          {
          switch(count)
            {
            case PCRE_ERROR_NOMATCH:
            if (gmatched == 0)
              {
              if (markptr == NULL) fprintf(outfile, "No match\n");
                else fprintf(outfile, "No match, mark = %s\n", markptr);
              }
            break;

            case PCRE_ERROR_BADUTF8:
            case PCRE_ERROR_SHORTUTF8:
            fprintf(outfile, "Error %d (%s UTF-8 string)", count,
              (count == PCRE_ERROR_BADUTF8)? "bad" : "short");
            if (use_size_offsets >= 2)
              fprintf(outfile, " offset=%d reason=%d", use_offsets[0],
                use_offsets[1]);
            fprintf(outfile, "\n");
            break;

            default:
            if (count < 0 && (-count) < sizeof(errtexts)/sizeof(const char *))
              fprintf(outfile, "Error %d (%s)\n", count, errtexts[-count]);
            else
              fprintf(outfile, "Error %d (Unexpected value)\n", count);
            break;
            }

          break;  /* Out of the /g loop */
          }
        }

      /* If not /g or /G we are done */

      if (!do_g && !do_G) break;

      /* If we have matched an empty string, first check to see if we are at
      the end of the subject. If so, the /g loop is over. Otherwise, mimic what
      Perl's /g options does. This turns out to be rather cunning. First we set
      PCRE_NOTEMPTY_ATSTART and PCRE_ANCHORED and try the match again at the
      same point. If this fails (picked up above) we advance to the next
      character. */

      g_notempty = 0;

      if (use_offsets[0] == use_offsets[1])
        {
        if (use_offsets[0] == len) break;
        g_notempty = PCRE_NOTEMPTY_ATSTART | PCRE_ANCHORED;
        }

      /* For /g, update the start offset, leaving the rest alone */

      if (do_g) start_offset = use_offsets[1];

      /* For /G, update the pointer and length */

      else
        {
        bptr += use_offsets[1];
        len -= use_offsets[1];
        }
      }  /* End of loop for /g and /G */

    NEXT_DATA: continue;
    }    /* End of loop for data lines */

  CONTINUE:

#if !defined NOPOSIX
  if (posix || do_posix) regfree(&preg);
#endif

  if (re != NULL) new_free(re);
  if (extra != NULL) pcre_free_study(extra);
  if (locale_set)
    {
    new_free((void *)tables);
    setlocale(LC_CTYPE, "C");
    locale_set = 0;
    }
  if (jit_stack != NULL)
    {
    pcre_jit_stack_free(jit_stack);
    jit_stack = NULL;
    }
  }

if (infile == stdin) fprintf(outfile, "\n");

EXIT:

if (infile != NULL && infile != stdin) fclose(infile);
if (outfile != NULL && outfile != stdout) fclose(outfile);

free(buffer);
free(dbuffer);
free(pbuffer);
free(offsets);

return yield;
}

/* End of pcretest.c */