diff --git a/jni/libccrtp/sources/autoconf/config.guess b/jni/libccrtp/sources/autoconf/config.guess
index 40eaed4..1804e9f 100755
--- a/jni/libccrtp/sources/autoconf/config.guess
+++ b/jni/libccrtp/sources/autoconf/config.guess
@@ -2,13 +2,13 @@
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011 Free Software Foundation, Inc.
+#   2011, 2012, 2013 Free Software Foundation, Inc.
 
-timestamp='2011-05-11'
+timestamp='2012-12-29'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -17,26 +17,22 @@
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner.  Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 #
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
+# Originally written by Per Bothner. 
 #
 # You can get the latest version of this script from:
 # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+
 
 me=`echo "$0" | sed -e 's,.*/,,'`
 
@@ -57,8 +53,8 @@
 
 Originally written by Per Bothner.
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
-Software Foundation, Inc.
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
+2012, 2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -145,7 +141,7 @@
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:NetBSD:*:*)
 	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
 	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
 	# switched to ELF, *-*-netbsd* would select the old
 	# object file format.  This provides both forward
@@ -202,6 +198,10 @@
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
 	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
     *:OpenBSD:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
 	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
@@ -304,7 +304,7 @@
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
 	echo arm-unknown-riscos
 	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
@@ -792,21 +792,26 @@
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit ;;
     *:FreeBSD:*:*)
-	case ${UNAME_MACHINE} in
-	    pc98)
-		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
 	    amd64)
 		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	    *)
-		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	esac
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
+    i*:MSYS*:*)
+	echo ${UNAME_MACHINE}-pc-msys
+	exit ;;
     i*:windows32*:*)
 	# uname -m includes "-pc" on this system.
 	echo ${UNAME_MACHINE}-mingw32
@@ -861,6 +866,13 @@
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
+    aarch64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
 	  EV5)   UNAME_MACHINE=alphaev5 ;;
@@ -895,13 +907,16 @@
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     cris:Linux:*:*)
-	echo cris-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-gnu
 	exit ;;
     crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-gnu
 	exit ;;
     frv:Linux:*:*)
-	echo frv-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    hexagon:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     i*86:Linux:*:*)
 	LIBC=gnu
@@ -943,7 +958,7 @@
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     padre:Linux:*:*)
 	echo sparc-unknown-linux-gnu
@@ -978,13 +993,13 @@
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     tile*:Linux:*:*)
-	echo ${UNAME_MACHINE}-tilera-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     vax:Linux:*:*)
 	echo ${UNAME_MACHINE}-dec-linux-gnu
 	exit ;;
     x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     xtensa*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
@@ -1191,6 +1206,9 @@
     BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
 	echo i586-pc-haiku
 	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1246,7 +1264,7 @@
     NEO-?:NONSTOP_KERNEL:*:*)
 	echo neo-tandem-nsk${UNAME_RELEASE}
 	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
+    NSE-*:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
     NSR-?:NONSTOP_KERNEL:*:*)
@@ -1315,11 +1333,11 @@
     i*86:AROS:*:*)
 	echo ${UNAME_MACHINE}-pc-aros
 	exit ;;
+    x86_64:VMkernel:*:*)
+	echo ${UNAME_MACHINE}-unknown-esx
+	exit ;;
 esac
 
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
 eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
diff --git a/jni/libccrtp/sources/autoconf/config.sub b/jni/libccrtp/sources/autoconf/config.sub
index 30fdca8..52f04bc 100755
--- a/jni/libccrtp/sources/autoconf/config.sub
+++ b/jni/libccrtp/sources/autoconf/config.sub
@@ -2,37 +2,32 @@
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011 Free Software Foundation, Inc.
+#   2011, 2012, 2013 Free Software Foundation, Inc.
 
-timestamp='2011-03-23'
+timestamp='2012-12-29'
 
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 
 
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -76,8 +71,8 @@
 GNU config.sub ($timestamp)
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
-Software Foundation, Inc.
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
+2012, 2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -125,13 +120,17 @@
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
   nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
-  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
   knetbsd*-gnu* | netbsd*-gnu* | \
   kopensolaris*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
   *)
     basic_machine=`echo $1 | sed 's/-[^-]*$//'`
     if [ $basic_machine != $1 ]
@@ -154,7 +153,7 @@
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze)
+	-apple | -axis | -knuth | -cray | -microblaze*)
 		os=
 		basic_machine=$1
 		;;
@@ -223,6 +222,12 @@
 	-isc*)
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-lynx*178)
+		os=-lynxos178
+		;;
+	-lynx*5)
+		os=-lynxos5
+		;;
 	-lynx*)
 		os=-lynxos
 		;;
@@ -247,20 +252,27 @@
 	# Some are omitted here because they have special meanings below.
 	1750a | 580 \
 	| a29k \
+	| aarch64 | aarch64_be \
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| arc \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
+	| be32 | be64 \
 	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
+	| epiphany \
 	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
+	| le32 | le64 \
 	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep | metag \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -291,7 +303,7 @@
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle \
 	| pyramid \
-	| rx \
+	| rl78 | rx \
 	| score \
 	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
@@ -300,7 +312,7 @@
 	| spu \
 	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
 	| ubicom32 \
-	| v850 | v850e \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
 	| we32k \
 	| x86 | xc16x | xstormy16 | xtensa \
 	| z8k | z80)
@@ -315,8 +327,7 @@
 	c6x)
 		basic_machine=tic6x-unknown
 		;;
-	m6811 | m68hc11 | m6812 | m68hc12 | picochip)
-		# Motorola 68HC11/12.
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
 		basic_machine=$basic_machine-unknown
 		os=-none
 		;;
@@ -329,7 +340,10 @@
 	strongarm | thumb | xscale)
 		basic_machine=arm-unknown
 		;;
-
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
 	xscaleeb)
 		basic_machine=armeb-unknown
 		;;
@@ -352,11 +366,13 @@
 	# Recognize the basic CPU types with company name.
 	580-* \
 	| a29k-* \
+	| aarch64-* | aarch64_be-* \
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* | avr32-* \
+	| be32-* | be64-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* \
 	| clipper-* | craynv-* | cydra-* \
@@ -365,12 +381,15 @@
 	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
+	| le32-* | le64-* \
 	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -400,7 +419,7 @@
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
 	| pyramid-* \
-	| romp-* | rs6000-* | rx-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
 	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
@@ -408,10 +427,11 @@
 	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
 	| tahoe-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-	| tile-* | tilegx-* \
+	| tile*-* \
 	| tron-* \
 	| ubicom32-* \
-	| v850-* | v850e-* | vax-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
 	| we32k-* \
 	| x86-* | x86_64-* | xc16x-* | xps100-* \
 	| xstormy16-* | xtensa*-* \
@@ -711,7 +731,6 @@
 	i370-ibm* | ibm*)
 		basic_machine=i370-ibm
 		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
 	i*86v32)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
@@ -769,9 +788,13 @@
 		basic_machine=ns32k-utek
 		os=-sysv
 		;;
-	microblaze)
+	microblaze*)
 		basic_machine=microblaze-xilinx
 		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
 	mingw32)
 		basic_machine=i386-pc
 		os=-mingw32
@@ -808,10 +831,18 @@
 	ms1-*)
 		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
 		;;
+	msys)
+		basic_machine=i386-pc
+		os=-msys
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
 		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
 	ncr3000)
 		basic_machine=i486-ncr
 		os=-sysv4
@@ -977,7 +1008,7 @@
 		;;
 	ppc64)	basic_machine=powerpc64-unknown
 		;;
-	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+	ppc64-* | ppc64p7-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
 		basic_machine=powerpc64le-unknown
@@ -992,7 +1023,11 @@
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
-	rdos)
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
 		basic_machine=i386-pc
 		os=-rdos
 		;;
@@ -1120,13 +1155,8 @@
 		basic_machine=t90-cray
 		os=-unicos
 		;;
-	# This must be matched before tile*.
-	tilegx*)
-		basic_machine=tilegx-unknown
-		os=-linux-gnu
-		;;
 	tile*)
-		basic_machine=tile-unknown
+		basic_machine=$basic_machine-unknown
 		os=-linux-gnu
 		;;
 	tx39)
@@ -1330,15 +1360,15 @@
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* | -cegcc* \
-	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-android* \
-	      | -linux-newlib* | -linux-uclibc* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
@@ -1521,6 +1551,9 @@
 	c4x-* | tic4x-*)
 		os=-coff
 		;;
+	hexagon-*)
+		os=-elf
+		;;
 	tic54x-*)
 		os=-coff
 		;;
@@ -1548,9 +1581,6 @@
 		;;
 	m68000-sun)
 		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
 		;;
 	m68*-cisco)
 		os=-aout
diff --git a/jni/libccrtp/sources/autoconf/install-sh b/jni/libccrtp/sources/autoconf/install-sh
index 6781b98..377bb86 100755
--- a/jni/libccrtp/sources/autoconf/install-sh
+++ b/jni/libccrtp/sources/autoconf/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2011-11-20.07; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,7 +35,7 @@
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
@@ -156,6 +156,10 @@
     -s) stripcmd=$stripprog;;
 
     -t) dst_arg=$2
+	# Protect names problematic for 'test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
 	shift;;
 
     -T) no_target_directory=true;;
@@ -186,6 +190,10 @@
     fi
     shift # arg
     dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
   done
 fi
 
@@ -194,13 +202,17 @@
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
 
 if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
 
   # Set umask so as not to create temps with too-generous modes.
   # However, 'strip' requires both read and write access to temps.
@@ -228,9 +240,9 @@
 
 for src
 do
-  # Protect names starting with `-'.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
-    -*) src=./$src;;
+    -* | [=\(\)!]) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
@@ -252,12 +264,7 @@
       echo "$0: no destination specified." >&2
       exit 1
     fi
-
     dst=$dst_arg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst;;
-    esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
@@ -347,7 +354,7 @@
 	      if test -z "$dir_arg" || {
 		   # Check for POSIX incompatibilities with -m.
 		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
+		   # other-writable bit of parent directory when it shouldn't.
 		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
 		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
 		   case $ls_ld_tmpdir in
@@ -385,7 +392,7 @@
 
       case $dstdir in
 	/*) prefix='/';;
-	-*) prefix='./';;
+	[-=\(\)!]*) prefix='./';;
 	*)  prefix='';;
       esac
 
@@ -403,7 +410,7 @@
 
       for d
       do
-	test -z "$d" && continue
+	test X"$d" = X && continue
 
 	prefix=$prefix$d
 	if test -d "$prefix"; then
diff --git a/jni/libccrtp/sources/autoconf/ltmain.sh b/jni/libccrtp/sources/autoconf/ltmain.sh
old mode 100755
new mode 100644
index b4a3231..63ae69d
--- a/jni/libccrtp/sources/autoconf/ltmain.sh
+++ b/jni/libccrtp/sources/autoconf/ltmain.sh
@@ -1,9 +1,9 @@
 
-# libtool (GNU libtool) 2.4
+# libtool (GNU libtool) 2.4.2
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -41,6 +41,7 @@
 #       --quiet, --silent    don't print informational messages
 #       --no-quiet, --no-silent
 #                            print informational messages (default)
+#       --no-warn            don't display warning messages
 #       --tag=TAG            use configuration variables from tag TAG
 #   -v, --verbose            print more informational messages than default
 #       --no-verbose         don't print the extra informational messages
@@ -69,7 +70,7 @@
 #         compiler:		$LTCC
 #         compiler flags:		$LTCFLAGS
 #         linker:		$LD (gnu? $with_gnu_ld)
-#         $progname:	(GNU libtool) 2.4 Debian-2.4-2ubuntu1
+#         $progname:	(GNU libtool) 2.4.2
 #         automake:	$automake_version
 #         autoconf:	$autoconf_version
 #
@@ -79,9 +80,9 @@
 
 PROGRAM=libtool
 PACKAGE=libtool
-VERSION="2.4 Debian-2.4-2ubuntu1"
+VERSION=2.4.2
 TIMESTAMP=""
-package_revision=1.3293
+package_revision=1.3337
 
 # Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -136,15 +137,10 @@
 
 : ${CP="cp -f"}
 test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
-: ${EGREP="/bin/grep -E"}
-: ${FGREP="/bin/grep -F"}
-: ${GREP="/bin/grep"}
-: ${LN_S="ln -s"}
 : ${MAKE="make"}
 : ${MKDIR="mkdir"}
 : ${MV="mv -f"}
 : ${RM="rm -f"}
-: ${SED="/bin/sed"}
 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
 : ${Xsed="$SED -e 1s/^X//"}
 
@@ -387,7 +383,7 @@
      ;;
   *)
      save_IFS="$IFS"
-     IFS=:
+     IFS=${PATH_SEPARATOR-:}
      for progdir in $PATH; do
        IFS="$save_IFS"
        test -x "$progdir/$progname" && break
@@ -771,8 +767,8 @@
 	s*\$LTCFLAGS*'"$LTCFLAGS"'*
 	s*\$LD*'"$LD"'*
 	s/\$with_gnu_ld/'"$with_gnu_ld"'/
-	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
-	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
 	p
 	d
      }
@@ -1052,6 +1048,7 @@
 opt_help=false
 opt_help_all=false
 opt_silent=:
+opt_warning=:
 opt_verbose=:
 opt_silent=false
 opt_verbose=false
@@ -1120,6 +1117,10 @@
 			opt_silent=false
 func_append preserve_args " $opt"
 			;;
+      --no-warning|--no-warn)
+			opt_warning=false
+func_append preserve_args " $opt"
+			;;
       --no-verbose)
 			opt_verbose=false
 func_append preserve_args " $opt"
@@ -2059,7 +2060,7 @@
     *.[cCFSifmso] | \
     *.ada | *.adb | *.ads | *.asm | \
     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
       func_xform "$libobj"
       libobj=$func_xform_result
       ;;
@@ -3201,11 +3202,13 @@
 
       # Set up the ranlib parameters.
       oldlib="$destdir/$name"
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
 
       func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
 
       if test -n "$stripme" && test -n "$old_striplib"; then
-	func_show_eval "$old_striplib $oldlib" 'exit $?'
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
       fi
 
       # Do each command in the postinstall commands.
@@ -3470,7 +3473,7 @@
 	  # linked before any other PIC object.  But we must not use
 	  # pic_flag when linking with -static.  The problem exists in
 	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
 	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
 	  *-*-hpux*)
 	    pic_flag_for_symtable=" $pic_flag"  ;;
@@ -3982,14 +3985,17 @@
 # launches target application with the remaining arguments.
 func_exec_program ()
 {
-  for lt_wr_arg
-  do
-    case \$lt_wr_arg in
-    --lt-*) ;;
-    *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
-    esac
-    shift
-  done
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
   func_exec_program_core \${1+\"\$@\"}
 }
 
@@ -5057,9 +5063,15 @@
 {
 EOF
 	    func_emit_wrapper yes |
-              $SED -e 's/\([\\"]\)/\\\1/g' \
-	           -e 's/^/  fputs ("/' -e 's/$/\\n", f);/'
-
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
             cat <<"EOF"
 }
 EOF
@@ -5643,7 +5655,8 @@
 	continue
 	;;
 
-      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
 	func_append compiler_flags " $arg"
 	func_append compile_command " $arg"
 	func_append finalize_command " $arg"
@@ -6111,10 +6124,7 @@
 	case $pass in
 	dlopen) libs="$dlfiles" ;;
 	dlpreopen) libs="$dlprefiles" ;;
-	link)
-	  libs="$deplibs %DEPLIBS%"
-	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
-	  ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
 	esac
       fi
       if test "$linkmode,$pass" = "lib,dlpreopen"; then
@@ -6150,7 +6160,8 @@
 	lib=
 	found=no
 	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
 	  if test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
@@ -6433,19 +6444,19 @@
 	    # It is a libtool convenience library, so add in its objects.
 	    func_append convenience " $ladir/$objdir/$old_library"
 	    func_append old_convenience " $ladir/$objdir/$old_library"
-	    tmp_libs=
-	    for deplib in $dependency_libs; do
-	      deplibs="$deplib $deplibs"
-	      if $opt_preserve_dup_deps ; then
-		case "$tmp_libs " in
-		*" $deplib "*) func_append specialdeplibs " $deplib" ;;
-		esac
-	      fi
-	      func_append tmp_libs " $deplib"
-	    done
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
 	    func_fatal_error "\`$lib' is not a convenience library"
 	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done
 	  continue
 	fi # $pass = conv
 
@@ -6834,7 +6845,7 @@
 	         test "$hardcode_direct_absolute" = no; then
 		add="$dir/$linklib"
 	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$dir"
+		add_dir="-L$absdir"
 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
 		  case $libdir in
@@ -7319,6 +7330,7 @@
 	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
 	  darwin|linux|osf|windows|none)
 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result
@@ -7337,9 +7349,6 @@
 	    revision="$number_minor"
 	    lt_irix_increment=no
 	    ;;
-	  *)
-	    func_fatal_configuration "$modename: unknown library version type \`$version_type'"
-	    ;;
 	  esac
 	  ;;
 	no)
@@ -7438,7 +7447,7 @@
 	  versuffix="$major.$revision"
 	  ;;
 
-	linux)
+	linux) # correct to gnu/linux during the next big refactor
 	  func_arith $current - $age
 	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
@@ -8026,6 +8035,11 @@
 
       # Test again, we may have decided not to build it any more
       if test "$build_libtool_libs" = yes; then
+	# Remove ${wl} instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
 	if test "$hardcode_into_libs" = yes; then
 	  # Hardcode the library paths
 	  hardcode_libdirs=
@@ -8056,7 +8070,7 @@
 	    elif test -n "$runpath_var"; then
 	      case "$perm_rpath " in
 	      *" $libdir "*) ;;
-	      *) func_apped perm_rpath " $libdir" ;;
+	      *) func_append perm_rpath " $libdir" ;;
 	      esac
 	    fi
 	  done
@@ -8064,11 +8078,7 @@
 	  if test -n "$hardcode_libdir_separator" &&
 	     test -n "$hardcode_libdirs"; then
 	    libdir="$hardcode_libdirs"
-	    if test -n "$hardcode_libdir_flag_spec_ld"; then
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
-	    else
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-	    fi
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
 	  fi
 	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
 	    # We should set the runpath_var.
@@ -9158,6 +9168,8 @@
 	    esac
 	  done
 	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
 	eval cmds=\"$old_archive_cmds\"
 
 	func_len " $cmds"
@@ -9267,7 +9279,8 @@
 	      *.la)
 		func_basename "$deplib"
 		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		func_resolve_sysroot "$deplib"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
 		test -z "$libdir" && \
 		  func_fatal_error "\`$deplib' is not a valid libtool archive"
 		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
diff --git a/jni/libccrtp/sources/autoconf/missing b/jni/libccrtp/sources/autoconf/missing
index 28055d2..cdea514 100755
--- a/jni/libccrtp/sources/autoconf/missing
+++ b/jni/libccrtp/sources/autoconf/missing
@@ -1,11 +1,10 @@
 #! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
 
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2012-06-26.16; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -26,69 +25,40 @@
 # the same distribution terms that you use for the rest of that program.
 
 if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
+  echo 1>&2 "Try '$0 --help' for more information"
   exit 1
 fi
 
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
 case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...
 
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
 
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
 
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
 
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
@@ -100,272 +70,141 @@
     ;;
 
   -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
     exit 1
     ;;
 
 esac
 
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
+# Run the given program, remember its exit status.
+"$@"; st=$?
 
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'automa4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
     ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
 
-  tar*)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
 
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te*)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison*|yacc*)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex*|flex*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar*)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case $firstarg in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case $firstarg in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
diff --git a/jni/libccrtp/sources/autoconf/texinfo.tex b/jni/libccrtp/sources/autoconf/texinfo.tex
index 9140826..85f184c 100644
--- a/jni/libccrtp/sources/autoconf/texinfo.tex
+++ b/jni/libccrtp/sources/autoconf/texinfo.tex
@@ -3,11 +3,11 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2009-08-14.15}
+\def\texinfoversion{2013-02-01.11}
 %
 % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-% 2007, 2008, 2009 Free Software Foundation, Inc.
+% 2007, 2008, 2009, 2010, 2011, 2012, 2013 Free Software Foundation, Inc.
 %
 % This texinfo.tex file is free software: you can redistribute it and/or
 % modify it under the terms of the GNU General Public License as
@@ -24,13 +24,14 @@
 %
 % As a special exception, when this file is read by TeX when processing
 % a Texinfo source document, you may use the result without
-% restriction.  (This has been our intent since Texinfo was invented.)
+% restriction. This Exception is an additional permission under section 7
+% of the GNU General Public License, version 3 ("GPLv3").
 %
 % Please try the latest version of texinfo.tex before submitting bug
 % reports; you can get the latest version from:
-%   http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
-%   ftp://tug.org/tex/texinfo.tex
-%     (and all CTAN mirrors, see http://www.ctan.org).
+%   http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or
+%   http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or
+%   http://www.gnu.org/software/texinfo/ (the Texinfo home page)
 % The texinfo.tex in any given distribution could well be out
 % of date, so if that's what you're using, please check.
 %
@@ -65,7 +66,6 @@
 \everyjob{\message{[Texinfo version \texinfoversion]}%
   \catcode`+=\active \catcode`\_=\active}
 
-
 \chardef\other=12
 
 % We never want plain's \outer definition of \+ in Texinfo.
@@ -93,14 +93,13 @@
 \let\ptexnewwrite\newwrite
 \let\ptexnoindent=\noindent
 \let\ptexplus=+
+\let\ptexraggedright=\raggedright
 \let\ptexrbrace=\}
 \let\ptexslash=\/
 \let\ptexstar=\*
 \let\ptext=\t
 \let\ptextop=\top
-{\catcode`\'=\active
-\global\let\ptexquoteright'}% Math-mode def from plain.tex.
-\let\ptexraggedright=\raggedright
+{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode
 
 % If this character appears in an error message or help string, it
 % starts a new line in the output.
@@ -118,10 +117,11 @@
 % Set up fixed words for English if not already set.
 \ifx\putwordAppendix\undefined  \gdef\putwordAppendix{Appendix}\fi
 \ifx\putwordChapter\undefined   \gdef\putwordChapter{Chapter}\fi
+\ifx\putworderror\undefined     \gdef\putworderror{error}\fi
 \ifx\putwordfile\undefined      \gdef\putwordfile{file}\fi
 \ifx\putwordin\undefined        \gdef\putwordin{in}\fi
-\ifx\putwordIndexIsEmpty\undefined     \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
-\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
+\ifx\putwordIndexIsEmpty\undefined       \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
+\ifx\putwordIndexNonexistent\undefined   \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
 \ifx\putwordInfo\undefined      \gdef\putwordInfo{Info}\fi
 \ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
 \ifx\putwordMethodon\undefined  \gdef\putwordMethodon{Method on}\fi
@@ -160,15 +160,18 @@
 \def\spaceisspace{\catcode`\ =\spacecat}
 
 % sometimes characters are active, so we need control sequences.
+\chardef\ampChar   = `\&
 \chardef\colonChar = `\:
 \chardef\commaChar = `\,
 \chardef\dashChar  = `\-
 \chardef\dotChar   = `\.
 \chardef\exclamChar= `\!
+\chardef\hashChar  = `\#
 \chardef\lquoteChar= `\`
 \chardef\questChar = `\?
 \chardef\rquoteChar= `\'
 \chardef\semiChar  = `\;
+\chardef\slashChar = `\/
 \chardef\underChar = `\_
 
 % Ignore a token.
@@ -199,36 +202,7 @@
 % that mark overfull boxes (in case you have decided
 % that the text looks ok even though it passes the margin).
 %
-\def\finalout{\overfullrule=0pt}
-
-% @| inserts a changebar to the left of the current line.  It should
-% surround any changed text.  This approach does *not* work if the
-% change spans more than two lines of output.  To handle that, we would
-% have adopt a much more difficult approach (putting marks into the main
-% vertical list for the beginning and end of each change).
-%
-\def\|{%
-  % \vadjust can only be used in horizontal mode.
-  \leavevmode
-  %
-  % Append this vertical mode material after the current line in the output.
-  \vadjust{%
-    % We want to insert a rule with the height and depth of the current
-    % leading; that is exactly what \strutbox is supposed to record.
-    \vskip-\baselineskip
-    %
-    % \vadjust-items are inserted at the left edge of the type.  So
-    % the \llap here moves out into the left-hand margin.
-    \llap{%
-      %
-      % For a thicker or thinner bar, change the `1pt'.
-      \vrule height\baselineskip width1pt
-      %
-      % This is the space between the bar and the text.
-      \hskip 12pt
-    }%
-  }%
-}
+\def\finalout{\overfullrule=0pt }
 
 % Sometimes it is convenient to have everything in the transcript file
 % and nothing on the terminal.  We don't just call \tracingall here,
@@ -246,7 +220,7 @@
   \tracingmacros2
   \tracingrestores1
   \showboxbreadth\maxdimen \showboxdepth\maxdimen
-  \ifx\eTeXversion\undefined\else % etex gives us more logging
+  \ifx\eTeXversion\thisisundefined\else % etex gives us more logging
     \tracingscantokens1
     \tracingifs1
     \tracinggroups1
@@ -257,6 +231,13 @@
   \errorcontextlines16
 }%
 
+% @errormsg{MSG}.  Do the index-like expansions on MSG, but if things
+% aren't perfect, it's not the end of the world, being an error message,
+% after all.
+% 
+\def\errormsg{\begingroup \indexnofonts \doerrormsg}
+\def\doerrormsg#1{\errmessage{#1}}
+
 % add check for \lastpenalty to plain's definitions.  If the last thing
 % we did was a \nobreak, we don't want to insert more space.
 %
@@ -267,7 +248,6 @@
 \def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
   \removelastskip\penalty-200\bigskip\fi\fi}
 
-% For @cropmarks command.
 % Do @cropmarks to get crop marks.
 %
 \newif\ifcropmarks
@@ -577,7 +557,7 @@
 }
 \def\inenvironment#1{%
   \ifx#1\empty
-    out of any environment%
+    outside of any environment%
   \else
     in environment \expandafter\string#1%
   \fi
@@ -589,7 +569,7 @@
 \parseargdef\end{%
   \if 1\csname iscond.#1\endcsname
   \else
-    % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03
+    % The general wording of \badenverr may not be ideal.
     \expandafter\checkenv\csname#1\endcsname
     \csname E#1\endcsname
     \endgroup
@@ -599,85 +579,6 @@
 \newhelp\EMsimple{Press RETURN to continue.}
 
 
-%% Simple single-character @ commands
-
-% @@ prints an @
-% Kludge this until the fonts are right (grr).
-\def\@{{\tt\char64}}
-
-% This is turned off because it was never documented
-% and you can use @w{...} around a quote to suppress ligatures.
-%% Define @` and @' to be the same as ` and '
-%% but suppressing ligatures.
-%\def\`{{`}}
-%\def\'{{'}}
-
-% Used to generate quoted braces.
-\def\mylbrace {{\tt\char123}}
-\def\myrbrace {{\tt\char125}}
-\let\{=\mylbrace
-\let\}=\myrbrace
-\begingroup
-  % Definitions to produce \{ and \} commands for indices,
-  % and @{ and @} for the aux/toc files.
-  \catcode`\{ = \other \catcode`\} = \other
-  \catcode`\[ = 1 \catcode`\] = 2
-  \catcode`\! = 0 \catcode`\\ = \other
-  !gdef!lbracecmd[\{]%
-  !gdef!rbracecmd[\}]%
-  !gdef!lbraceatcmd[@{]%
-  !gdef!rbraceatcmd[@}]%
-!endgroup
-
-% @comma{} to avoid , parsing problems.
-\let\comma = ,
-
-% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
-% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
-\let\, = \c
-\let\dotaccent = \.
-\def\ringaccent#1{{\accent23 #1}}
-\let\tieaccent = \t
-\let\ubaraccent = \b
-\let\udotaccent = \d
-
-% Other special characters: @questiondown @exclamdown @ordf @ordm
-% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
-\def\questiondown{?`}
-\def\exclamdown{!`}
-\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
-\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
-
-% Dotless i and dotless j, used for accents.
-\def\imacro{i}
-\def\jmacro{j}
-\def\dotless#1{%
-  \def\temp{#1}%
-  \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
-  \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
-  \else \errmessage{@dotless can be used only with i or j}%
-  \fi\fi
-}
-
-% The \TeX{} logo, as in plain, but resetting the spacing so that a
-% period following counts as ending a sentence.  (Idea found in latex.)
-%
-\edef\TeX{\TeX \spacefactor=1000 }
-
-% @LaTeX{} logo.  Not quite the same results as the definition in
-% latex.ltx, since we use a different font for the raised A; it's most
-% convenient for us to use an explicitly smaller font, rather than using
-% the \scriptstyle font (since we don't reset \scriptstyle and
-% \scriptscriptstyle).
-%
-\def\LaTeX{%
-  L\kern-.36em
-  {\setbox0=\hbox{T}%
-   \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}%
-  \kern-.15em
-  \TeX
-}
-
 % Be sure we're in horizontal mode when doing a tie, since we make space
 % equivalent to this in @example-like environments. Otherwise, a space
 % at the beginning of a line will start with \penalty -- and
@@ -694,7 +595,7 @@
 \def\:{\spacefactor=1000 }
 
 % @* forces a line break.
-\def\*{\hfil\break\hbox{}\ignorespaces}
+\def\*{\unskip\hfil\break\hbox{}\ignorespaces}
 
 % @/ allows a line break.
 \let\/=\allowbreak
@@ -719,7 +620,7 @@
   \else\ifx\temp\offword \plainnonfrenchspacing
   \else
     \errhelp = \EMsimple
-    \errmessage{Unknown @frenchspacing option `\temp', must be on/off}%
+    \errmessage{Unknown @frenchspacing option `\temp', must be on|off}%
   \fi\fi
 }
 
@@ -801,15 +702,6 @@
 
 \newdimen\mil  \mil=0.001in
 
-% Old definition--didn't work.
-%\parseargdef\need{\par %
-%% This method tries to make TeX break the page naturally
-%% if the depth of the box does not fit.
-%{\baselineskip=0pt%
-%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
-%\prevdepth=-1000pt
-%}}
-
 \parseargdef\need{%
   % Ensure vertical mode, so we don't make a big box in the middle of a
   % paragraph.
@@ -873,7 +765,7 @@
 
 % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
 % paragraph.  For more general purposes, use the \margin insertion
-% class.  WHICH is `l' or `r'.
+% class.  WHICH is `l' or `r'.  Not documented, written for gawk manual.
 %
 \newskip\inmarginspacing \inmarginspacing=1cm
 \def\strutdepth{\dp\strutbox}
@@ -920,6 +812,36 @@
   \temp
 }
 
+% @| inserts a changebar to the left of the current line.  It should
+% surround any changed text.  This approach does *not* work if the
+% change spans more than two lines of output.  To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).  This command
+% is not documented, not supported, and doesn't work.
+%
+\def\|{%
+  % \vadjust can only be used in horizontal mode.
+  \leavevmode
+  %
+  % Append this vertical mode material after the current line in the output.
+  \vadjust{%
+    % We want to insert a rule with the height and depth of the current
+    % leading; that is exactly what \strutbox is supposed to record.
+    \vskip-\baselineskip
+    %
+    % \vadjust-items are inserted at the left edge of the type.  So
+    % the \llap here moves out into the left-hand margin.
+    \llap{%
+      %
+      % For a thicker or thinner bar, change the `1pt'.
+      \vrule height\baselineskip width1pt
+      %
+      % This is the space between the bar and the text.
+      \hskip 12pt
+    }%
+  }%
+}
+
 % @include FILE -- \input text of FILE.
 %
 \def\include{\parseargusing\filenamecatcodes\includezzz}
@@ -930,6 +852,7 @@
     \makevalueexpandable  % we want to expand any @value in FILE.
     \turnoffactive        % and allow special characters in the expansion
     \indexnofonts         % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @include of #1^^J}%
     \edef\temp{\noexpand\input #1 }%
     %
     % This trickery is to read FILE outside of a group, in case it makes
@@ -965,7 +888,7 @@
 \def\popthisfilestack{\errthisfilestackempty}
 \def\errthisfilestackempty{\errmessage{Internal error:
   the stack of filenames is empty.}}
-
+%
 \def\thisfile{}
 
 % @center line
@@ -973,36 +896,46 @@
 %
 \parseargdef\center{%
   \ifhmode
-    \let\next\centerH
+    \let\centersub\centerH
   \else
-    \let\next\centerV
+    \let\centersub\centerV
   \fi
-  \next{\hfil \ignorespaces#1\unskip \hfil}%
+  \centersub{\hfil \ignorespaces#1\unskip \hfil}%
+  \let\centersub\relax % don't let the definition persist, just in case
 }
-\def\centerH#1{%
-  {%
-    \hfil\break
-    \advance\hsize by -\leftskip
-    \advance\hsize by -\rightskip
-    \line{#1}%
-    \break
-  }%
+\def\centerH#1{{%
+  \hfil\break
+  \advance\hsize by -\leftskip
+  \advance\hsize by -\rightskip
+  \line{#1}%
+  \break
+}}
+%
+\newcount\centerpenalty
+\def\centerV#1{%
+  % The idea here is the same as in \startdefun, \cartouche, etc.: if
+  % @center is the first thing after a section heading, we need to wipe
+  % out the negative parskip inserted by \sectionheading, but still
+  % prevent a page break here.
+  \centerpenalty = \lastpenalty
+  \ifnum\centerpenalty>10000 \vskip\parskip \fi
+  \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi
+  \line{\kern\leftskip #1\kern\rightskip}%
 }
-\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
 
 % @sp n   outputs n lines of vertical space
-
+%
 \parseargdef\sp{\vskip #1\baselineskip}
 
 % @comment ...line which is ignored...
 % @c is the same as @comment
 % @ignore ... @end ignore  is another way to write a comment
-
+%
 \def\comment{\begingroup \catcode`\^^M=\other%
 \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
 \commentxxx}
 {\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
-
+%
 \let\c=\comment
 
 % @paragraphindent NCHARS
@@ -1095,109 +1028,6 @@
 }
 
 
-% @asis just yields its argument.  Used with @table, for example.
-%
-\def\asis#1{#1}
-
-% @math outputs its argument in math mode.
-%
-% One complication: _ usually means subscripts, but it could also mean
-% an actual _ character, as in @math{@var{some_variable} + 1}.  So make
-% _ active, and distinguish by seeing if the current family is \slfam,
-% which is what @var uses.
-{
-  \catcode`\_ = \active
-  \gdef\mathunderscore{%
-    \catcode`\_=\active
-    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
-  }
-}
-% Another complication: we want \\ (and @\) to output a \ character.
-% FYI, plain.tex uses \\ as a temporary control sequence (why?), but
-% this is not advertised and we don't care.  Texinfo does not
-% otherwise define @\.
-%
-% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
-\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
-%
-\def\math{%
-  \tex
-  \mathunderscore
-  \let\\ = \mathbackslash
-  \mathactive
-  % make the texinfo accent commands work in math mode
-  \let\"=\ddot
-  \let\'=\acute
-  \let\==\bar
-  \let\^=\hat
-  \let\`=\grave
-  \let\u=\breve
-  \let\v=\check
-  \let\~=\tilde
-  \let\dotaccent=\dot
-  $\finishmath
-}
-\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
-
-% Some active characters (such as <) are spaced differently in math.
-% We have to reset their definitions in case the @math was an argument
-% to a command which sets the catcodes (such as @item or @section).
-%
-{
-  \catcode`^ = \active
-  \catcode`< = \active
-  \catcode`> = \active
-  \catcode`+ = \active
-  \catcode`' = \active
-  \gdef\mathactive{%
-    \let^ = \ptexhat
-    \let< = \ptexless
-    \let> = \ptexgtr
-    \let+ = \ptexplus
-    \let' = \ptexquoteright
-  }
-}
-
-% Some math mode symbols.
-\def\bullet{$\ptexbullet$}
-\def\geq{\ifmmode \ge\else $\ge$\fi}
-\def\leq{\ifmmode \le\else $\le$\fi}
-\def\minus{\ifmmode -\else $-$\fi}
-
-% @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in the cm
-% typewriter fonts as three actual period characters; on the other hand,
-% in other typewriter fonts three periods are wider than 1.5em.  So do
-% whichever is larger.
-%
-\def\dots{%
-  \leavevmode
-  \setbox0=\hbox{...}% get width of three periods
-  \ifdim\wd0 > 1.5em
-    \dimen0 = \wd0
-  \else
-    \dimen0 = 1.5em
-  \fi
-  \hbox to \dimen0{%
-    \hskip 0pt plus.25fil
-    .\hskip 0pt plus1fil
-    .\hskip 0pt plus1fil
-    .\hskip 0pt plus.5fil
-  }%
-}
-
-% @enddots{} is an end-of-sentence ellipsis.
-%
-\def\enddots{%
-  \dots
-  \spacefactor=\endofsentencespacefactor
-}
-
-% @comma{} is so commas can be inserted into text without messing up
-% Texinfo's parsing.
-%
-\let\comma = ,
-
 % @refill is a no-op.
 \let\refill=\relax
 
@@ -1262,9 +1092,8 @@
 \newif\ifpdfmakepagedest
 
 % when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
-% can be set).  So we test for \relax and 0 as well as \undefined,
-% borrowed from ifpdf.sty.
-\ifx\pdfoutput\undefined
+% can be set).  So we test for \relax and 0 as well as being undefined.
+\ifx\pdfoutput\thisisundefined
 \else
   \ifx\pdfoutput\relax
   \else
@@ -1279,50 +1108,24 @@
 % for display in the outlines, and in other places.  Thus, we have to
 % double any backslashes.  Otherwise, a name like "\node" will be
 % interpreted as a newline (\n), followed by o, d, e.  Not good.
-% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html
-% (and related messages, the final outcome is that it is up to the TeX
-% user to double the backslashes and otherwise make the string valid, so
-% that's what we do).
+% 
+% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
+% related messages.  The final outcome is that it is up to the TeX user
+% to double the backslashes and otherwise make the string valid, so
+% that's what we do.  pdftex 1.30.0 (ca.2005) introduced a primitive to
+% do this reliably, so we use it.
 
-% double active backslashes.
-%
-{\catcode`\@=0 \catcode`\\=\active
- @gdef@activebackslashdouble{%
-   @catcode`@\=@active
-   @let\=@doublebackslash}
-}
-
-% To handle parens, we must adopt a different approach, since parens are
-% not active characters.  hyperref.dtx (which has the same problem as
-% us) handles it with this amazing macro to replace tokens, with minor
-% changes for Texinfo.  It is included here under the GPL by permission
-% from the author, Heiko Oberdiek.
-%
-% #1 is the tokens to replace.
-% #2 is the replacement.
-% #3 is the control sequence with the string.
-%
-\def\HyPsdSubst#1#2#3{%
-  \def\HyPsdReplace##1#1##2\END{%
-    ##1%
-    \ifx\\##2\\%
-    \else
-      #2%
-      \HyReturnAfterFi{%
-        \HyPsdReplace##2\END
-      }%
-    \fi
-  }%
-  \xdef#3{\expandafter\HyPsdReplace#3#1\END}%
-}
-\long\def\HyReturnAfterFi#1\fi{\fi#1}
-
-% #1 is a control sequence in which to do the replacements.
-\def\backslashparens#1{%
-  \xdef#1{#1}% redefine it as its expansion; the definition is simply
-             % \lastnode when called from \setref -> \pdfmkdest.
-  \HyPsdSubst{(}{\realbackslash(}{#1}%
-  \HyPsdSubst{)}{\realbackslash)}{#1}%
+% #1 is a control sequence in which to do the replacements,
+% which we \xdef.
+\def\txiescapepdf#1{%
+  \ifx\pdfescapestring\thisisundefined
+    % No primitive available; should we give a warning or log?
+    % Many times it won't matter.
+  \else
+    % The expandable \pdfescapestring primitive escapes parentheses,
+    % backslashes, and other special chars.
+    \xdef#1{\pdfescapestring{#1}}%
+  \fi
 }
 
 \newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
@@ -1381,32 +1184,34 @@
   %
   % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
   \def\dopdfimage#1#2#3{%
-    \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
-    \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+    \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+    \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
     %
-    % pdftex (and the PDF format) support .png, .jpg, .pdf (among
-    % others).  Let's try in that order.
+    % pdftex (and the PDF format) support .pdf, .png, .jpg (among
+    % others).  Let's try in that order, PDF first since if
+    % someone has a scalable image, presumably better to use that than a
+    % bitmap.
     \let\pdfimgext=\empty
     \begingroup
-      \openin 1 #1.png \ifeof 1
-        \openin 1 #1.jpg \ifeof 1
-          \openin 1 #1.jpeg \ifeof 1
-            \openin 1 #1.JPG \ifeof 1
-              \openin 1 #1.pdf \ifeof 1
-                \openin 1 #1.PDF \ifeof 1
+      \openin 1 #1.pdf \ifeof 1
+        \openin 1 #1.PDF \ifeof 1
+          \openin 1 #1.png \ifeof 1
+            \openin 1 #1.jpg \ifeof 1
+              \openin 1 #1.jpeg \ifeof 1
+                \openin 1 #1.JPG \ifeof 1
                   \errhelp = \nopdfimagehelp
                   \errmessage{Could not find image file #1 for pdf}%
-                \else \gdef\pdfimgext{PDF}%
+                \else \gdef\pdfimgext{JPG}%
                 \fi
-              \else \gdef\pdfimgext{pdf}%
+              \else \gdef\pdfimgext{jpeg}%
               \fi
-            \else \gdef\pdfimgext{JPG}%
+            \else \gdef\pdfimgext{jpg}%
             \fi
-          \else \gdef\pdfimgext{jpeg}%
+          \else \gdef\pdfimgext{png}%
           \fi
-        \else \gdef\pdfimgext{jpg}%
+        \else \gdef\pdfimgext{PDF}%
         \fi
-      \else \gdef\pdfimgext{png}%
+      \else \gdef\pdfimgext{pdf}%
       \fi
       \closein 1
     \endgroup
@@ -1418,8 +1223,8 @@
     \else
       \immediate\pdfximage
     \fi
-      \ifdim \wd0 >0pt width \imagewidth \fi
-      \ifdim \wd2 >0pt height \imageheight \fi
+      \ifdim \wd0 >0pt width \pdfimagewidth \fi
+      \ifdim \wd2 >0pt height \pdfimageheight \fi
       \ifnum\pdftexversion<13
          #1.\pdfimgext
        \else
@@ -1434,10 +1239,9 @@
     % such as \, aren't expanded when present in a section title.
     \indexnofonts
     \turnoffactive
-    \activebackslashdouble
     \makevalueexpandable
     \def\pdfdestname{#1}%
-    \backslashparens\pdfdestname
+    \txiescapepdf\pdfdestname
     \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
   }}
   %
@@ -1469,29 +1273,24 @@
     % page number.  We could generate a destination for the section
     % text in the case where a section has no node, but it doesn't
     % seem worth the trouble, since most documents are normally structured.
-    \def\pdfoutlinedest{#3}%
+    \edef\pdfoutlinedest{#3}%
     \ifx\pdfoutlinedest\empty
       \def\pdfoutlinedest{#4}%
     \else
-      % Doubled backslashes in the name.
-      {\activebackslashdouble \xdef\pdfoutlinedest{#3}%
-       \backslashparens\pdfoutlinedest}%
+      \txiescapepdf\pdfoutlinedest
     \fi
     %
-    % Also double the backslashes in the display string.
-    {\activebackslashdouble \xdef\pdfoutlinetext{#1}%
-     \backslashparens\pdfoutlinetext}%
+    % Also escape PDF chars in the display string.
+    \edef\pdfoutlinetext{#1}%
+    \txiescapepdf\pdfoutlinetext
     %
     \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
   }
   %
   \def\pdfmakeoutlines{%
     \begingroup
-      % Thanh's hack / proper braces in bookmarks
-      \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
-      \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
-      %
       % Read toc silently, to get counts of subentries for \pdfoutline.
+      \def\partentry##1##2##3##4{}% ignore parts in the outlines
       \def\numchapentry##1##2##3##4{%
 	\def\thischapnum{##2}%
 	\def\thissecnum{0}%
@@ -1545,25 +1344,41 @@
       % Latin 2 (0xea) gets translated to a | character.  Info from
       % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
       %
-      % xx to do this right, we have to translate 8-bit characters to
-      % their "best" equivalent, based on the @documentencoding.  Right
-      % now, I guess we'll just let the pdf reader have its way.
+      % TODO this right, we have to translate 8-bit characters to
+      % their "best" equivalent, based on the @documentencoding.  Too
+      % much work for too little return.  Just use the ASCII equivalents
+      % we use for the index sort strings.
+      % 
       \indexnofonts
       \setupdatafile
+      % We can have normal brace characters in the PDF outlines, unlike
+      % Texinfo index files.  So set that up.
+      \def\{{\lbracecharliteral}%
+      \def\}{\rbracecharliteral}%
       \catcode`\\=\active \otherbackslash
       \input \tocreadfilename
     \endgroup
   }
+  {\catcode`[=1 \catcode`]=2
+   \catcode`{=\other \catcode`}=\other
+   \gdef\lbracecharliteral[{]%
+   \gdef\rbracecharliteral[}]%
+  ]
   %
   \def\skipspaces#1{\def\PP{#1}\def\D{|}%
     \ifx\PP\D\let\nextsp\relax
     \else\let\nextsp\skipspaces
-      \ifx\p\space\else\addtokens{\filename}{\PP}%
-        \advance\filenamelength by 1
-      \fi
+      \addtokens{\filename}{\PP}%
+      \advance\filenamelength by 1
     \fi
     \nextsp}
-  \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
+  \def\getfilename#1{%
+    \filenamelength=0
+    % If we don't expand the argument now, \skipspaces will get
+    % snagged on things like "@value{foo}".
+    \edef\temp{#1}%
+    \expandafter\skipspaces\temp|\relax
+  }
   \ifnum\pdftexversion < 14
     \let \startlink \pdfannotlink
   \else
@@ -1660,9 +1475,6 @@
 \def\ttsl{\setfontstyle{ttsl}}
 
 
-% Default leading.
-\newdimen\textleading  \textleading = 13.2pt
-
 % Set the baselineskip to #1, and the lineskip and strut size
 % correspondingly.  There is no deep meaning behind these magic numbers
 % used as factors; they just match (closely enough) what Knuth defined.
@@ -1674,6 +1486,7 @@
 % can get a sort of poor man's double spacing by redefining this.
 \def\baselinefactor{1}
 %
+\newdimen\textleading
 \def\setleading#1{%
   \dimen0 = #1\relax
   \normalbaselineskip = \baselinefactor\dimen0
@@ -1695,7 +1508,7 @@
 % if we are producing pdf, and we have \pdffontattr, then define cmaps.
 % (\pdffontattr was introduced many years ago, but people still run
 % older pdftex's; it's easy to conditionalize, so we do.)
-\ifpdf \ifx\pdffontattr\undefined \else
+\ifpdf \ifx\pdffontattr\thisisundefined \else
   \begingroup
     \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
     \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
@@ -1946,28 +1759,34 @@
 \fi\fi
 
 
-% Set the font macro #1 to the font named #2, adding on the
-% specified font prefix (normally `cm').
+% Set the font macro #1 to the font named \fontprefix#2.
 % #3 is the font's design size, #4 is a scale factor, #5 is the CMap
-% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass
-% empty to omit).
+% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit).
+% Example:
+% #1 = \textrm
+% #2 = \rmshape
+% #3 = 10
+% #4 = \mainmagstep
+% #5 = OT1
+%
 \def\setfont#1#2#3#4#5{%
   \font#1=\fontprefix#2#3 scaled #4
   \csname cmap#5\endcsname#1%
 }
 % This is what gets called when #5 of \setfont is empty.
 \let\cmap\gobble
-% emacs-page end of cmaps
+%
+% (end of cmaps)
 
 % Use cm as the default font prefix.
 % To specify the font prefix, you must define \fontprefix
 % before you read in texinfo.tex.
-\ifx\fontprefix\undefined
+\ifx\fontprefix\thisisundefined
 \def\fontprefix{cm}
 \fi
 % Support font families that don't use the same naming scheme as CM.
 \def\rmshape{r}
-\def\rmbshape{bx}               %where the normal face is bold
+\def\rmbshape{bx}               % where the normal face is bold
 \def\bfshape{b}
 \def\bxshape{bx}
 \def\ttshape{tt}
@@ -1982,8 +1801,7 @@
 \def\scshape{csc}
 \def\scbshape{csc}
 
-% Definitions for a main text size of 11pt.  This is the default in
-% Texinfo.
+% Definitions for a main text size of 11pt.  (The default in Texinfo.)
 %
 \def\definetextfontsizexi{%
 % Text fonts (11.2pt, magstep1).
@@ -2105,10 +1923,10 @@
 \font\reducedsy=cmsy10
 \def\reducedecsize{1000}
 
-% reset the current fonts
-\textfonts
+\textleading = 13.2pt % line spacing for 11pt CM
+\textfonts            % reset the current fonts
 \rm
-} % end of 11pt text font size definitions
+} % end of 11pt text font size definitions, \definetextfontsizexi
 
 
 % Definitions to make the main text be 10pt Computer Modern, with
@@ -2236,25 +2054,24 @@
 \font\reducedsy=cmsy9
 \def\reducedecsize{0900}
 
-% reduce space between paragraphs
-\divide\parskip by 2
-
-% reset the current fonts
-\textfonts
+\divide\parskip by 2  % reduce space between paragraphs
+\textleading = 12pt   % line spacing for 10pt CM
+\textfonts            % reset the current fonts
 \rm
-} % end of 10pt text font size definitions
+} % end of 10pt text font size definitions, \definetextfontsizex
 
 
 % We provide the user-level command
 %   @fonttextsize 10
 % (or 11) to redefine the text font size.  pt is assumed.
 %
-\def\xword{10}
 \def\xiword{11}
+\def\xword{10}
+\def\xwordpt{10pt}
 %
 \parseargdef\fonttextsize{%
   \def\textsizearg{#1}%
-  \wlog{doing @fonttextsize \textsizearg}%
+  %\wlog{doing @fonttextsize \textsizearg}%
   %
   % Set \globaldefs so that documents can use this inside @tex, since
   % makeinfo 4.8 does not support it, but we need it nonetheless.
@@ -2308,7 +2125,7 @@
   \let\tenttsl=\titlettsl
   \def\curfontsize{title}%
   \def\lsize{chap}\def\lllsize{subsec}%
-  \resetmathfonts \setleading{25pt}}
+  \resetmathfonts \setleading{27pt}}
 \def\titlefont#1{{\titlefonts\rmisbold #1}}
 \def\chapfonts{%
   \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
@@ -2436,12 +2253,14 @@
 
 % Markup style setup for left and right quotes.
 \defmarkupstylesetup\markupsetuplq{%
-  \expandafter\let\expandafter \temp \csname markupsetuplq\currentmarkupstyle\endcsname
+  \expandafter\let\expandafter \temp
+    \csname markupsetuplq\currentmarkupstyle\endcsname
   \ifx\temp\relax \markupsetuplqdefault \else \temp \fi
 }
 
 \defmarkupstylesetup\markupsetuprq{%
-  \expandafter\let\expandafter \temp \csname markupsetuprq\currentmarkupstyle\endcsname
+  \expandafter\let\expandafter \temp
+    \csname markupsetuprq\currentmarkupstyle\endcsname
   \ifx\temp\relax \markupsetuprqdefault \else \temp \fi
 }
 
@@ -2454,28 +2273,31 @@
 
 \gdef\markupsetcodequoteleft{\let`\codequoteleft}
 \gdef\markupsetcodequoteright{\let'\codequoteright}
-
-\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft}
 }
 
 \let\markupsetuplqcode \markupsetcodequoteleft
 \let\markupsetuprqcode \markupsetcodequoteright
+%
 \let\markupsetuplqexample \markupsetcodequoteleft
 \let\markupsetuprqexample \markupsetcodequoteright
+%
+\let\markupsetuplqkbd     \markupsetcodequoteleft
+\let\markupsetuprqkbd     \markupsetcodequoteright
+%
+\let\markupsetuplqsamp \markupsetcodequoteleft
+\let\markupsetuprqsamp \markupsetcodequoteright
+%
 \let\markupsetuplqverb \markupsetcodequoteleft
 \let\markupsetuprqverb \markupsetcodequoteright
+%
 \let\markupsetuplqverbatim \markupsetcodequoteleft
 \let\markupsetuprqverbatim \markupsetcodequoteright
 
-\let\markupsetuplqsamp \markupsetnoligaturesquoteleft
-\let\markupsetuplqkbd \markupsetnoligaturesquoteleft
-
-% Allow an option to not replace quotes with a regular directed right
-% quote/apostrophe (char 0x27), but instead use the undirected quote
-% from cmtt (char 0x0d).  The undirected quote is ugly, so don't make it
-% the default, but it works for pasting with more pdf viewers (at least
-% evince), the lilypond developers report.  xpdf does work with the
-% regular 0x27.
+% Allow an option to not use regular directed right quote/apostrophe
+% (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
+% The undirected quote is ugly, so don't make it the default, but it
+% works for pasting with more pdf viewers (at least evince), the
+% lilypond developers report.  xpdf does work with the regular 0x27.
 %
 \def\codequoteright{%
   \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
@@ -2499,33 +2321,83 @@
   \else \char'22 \fi
 }
 
+% Commands to set the quote options.
+% 
+\parseargdef\codequoteundirected{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}%
+  \fi\fi
+}
+%
+\parseargdef\codequotebacktick{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}%
+  \fi\fi
+}
+
 % [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font.
 \def\noligaturesquoteleft{\relax\lq}
 
 % Count depth in font-changes, for error checks
 \newcount\fontdepth \fontdepth=0
 
-%% Add scribe-like font environments, plus @l for inline lisp (usually sans
-%% serif) and @ii for TeX italic
+% Font commands.
 
-% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
-% unless the following character is such as not to need one.
-\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else
-                    \ptexslash\fi\fi\fi}
-\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
-\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
+% #1 is the font command (\sl or \it), #2 is the text to slant.
+% If we are in a monospaced environment, however, 1) always use \ttsl,
+% and 2) do not add an italic correction.
+\def\dosmartslant#1#2{%
+  \ifusingtt 
+    {{\ttsl #2}\let\next=\relax}%
+    {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}%
+  \next
+}
+\def\smartslanted{\dosmartslant\sl}
+\def\smartitalic{\dosmartslant\it}
 
-% like \smartslanted except unconditionally uses \ttsl.
-% @var is set to this for defun arguments.
-\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
+% Output an italic correction unless \next (presumed to be the following
+% character) is such as not to need one.
+\def\smartitaliccorrection{%
+  \ifx\next,%
+  \else\ifx\next-%
+  \else\ifx\next.%
+  \else\ptexslash
+  \fi\fi\fi
+  \aftersmartic
+}
+
+% Unconditional use \ttsl, and no ic.  @var is set to this for defuns.
+\def\ttslanted#1{{\ttsl #1}}
 
 % @cite is like \smartslanted except unconditionally use \sl.  We never want
 % ttsl for book titles, do we?
-\def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
+\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection}
+
+\def\aftersmartic{}
+\def\var#1{%
+  \let\saveaftersmartic = \aftersmartic
+  \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}%
+  \smartslanted{#1}%
+}
 
 \let\i=\smartitalic
 \let\slanted=\smartslanted
-\def\var#1{{\setupmarkupstyle{var}\smartslanted{#1}}}
 \let\dfn=\smartslanted
 \let\emph=\smartitalic
 
@@ -2575,34 +2447,12 @@
 % @samp.
 \def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
 
-% definition of @key that produces a lozenge.  Doesn't adjust to text size.
-%\setfont\keyrm\rmshape{8}{1000}{OT1}
-%\font\keysy=cmsy9
-%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
-%  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
-%    \vbox{\hrule\kern-0.4pt
-%     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
-%    \kern-0.4pt\hrule}%
-%  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+% @indicateurl is \samp, that is, with quotes.
+\let\indicateurl=\samp
 
-% definition of @key with no lozenge.  If the current font is already
-% monospace, don't change it; that way, we respect @kbdinputstyle.  But
-% if it isn't monospace, then use \tt.
-%
-\def\key#1{{\setupmarkupstyle{key}%
-  \nohyphenation
-  \ifmonospace\else\tt\fi
-  #1}\null}
-
-% ctrl is no longer a Texinfo command.
-\def\ctrl #1{{\tt \rawbackslash \hat}#1}
-
-% @file, @option are the same as @samp.
-\let\file=\samp
-\let\option=\samp
-
-% @code is a modification of @t,
-% which makes spaces the same size as normal in the surrounding text.
+% @code (and similar) prints in typewriter, but with spaces the same
+% size as normal in the surrounding text, without hyphenation, etc.
+% This is a subroutine for that.
 \def\tclose#1{%
   {%
     % Change normal interword space to be same as for the current font.
@@ -2621,13 +2471,13 @@
     \plainfrenchspacing
     #1%
   }%
-  \null
+  \null % reset spacefactor to 1000
 }
 
 % We *must* turn on hyphenation at `-' and `_' in @code.
 % Otherwise, it is too hard to avoid overfull hboxes
 % in the Emacs manual, the Library manual, etc.
-
+%
 % Unfortunately, TeX uses one parameter (\hyphenchar) to control
 % both hyphenation at - and hyphenation within words.
 % We must therefore turn them both off (\tclose does that)
@@ -2646,14 +2496,16 @@
      \let-\codedash
      \let_\codeunder
     \else
-     \let-\realdash
+     \let-\normaldash
      \let_\realunder
     \fi
     \codex
   }
 }
 
-\def\realdash{-}
+\def\codex #1{\tclose{#1}\endgroup}
+
+\def\normaldash{-}
 \def\codedash{-\discretionary{}{}{}}
 \def\codeunder{%
   % this is all so @math{@code{var_name}+1} can work.  In math mode, _
@@ -2666,12 +2518,11 @@
              \discretionary{}{}{}}%
             {\_}%
 }
-\def\codex #1{\tclose{#1}\endgroup}
 
 % An additional complication: the above will allow breaks after, e.g.,
-% each of the four underscores in __typeof__.  This is undesirable in
-% some manuals, especially if they don't have long identifiers in
-% general.  @allowcodebreaks provides a way to control this.
+% each of the four underscores in __typeof__.  This is bad.
+% @allowcodebreaks provides a document-level way to turn breaking at -
+% and _ on and off.
 %
 \newif\ifallowcodebreaks  \allowcodebreakstrue
 
@@ -2686,63 +2537,25 @@
     \allowcodebreaksfalse
   \else
     \errhelp = \EMsimple
-    \errmessage{Unknown @allowcodebreaks option `\txiarg'}%
+    \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}%
   \fi\fi
 }
 
-% @kbd is like @code, except that if the argument is just one @key command,
-% then @kbd has no effect.
-\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}}
-
-% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
-%   `example' (@kbd uses ttsl only inside of @example and friends),
-%   or `code' (@kbd uses normal tty font always).
-\parseargdef\kbdinputstyle{%
-  \def\txiarg{#1}%
-  \ifx\txiarg\worddistinct
-    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
-  \else\ifx\txiarg\wordexample
-    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
-  \else\ifx\txiarg\wordcode
-    \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
-  \else
-    \errhelp = \EMsimple
-    \errmessage{Unknown @kbdinputstyle option `\txiarg'}%
-  \fi\fi\fi
-}
-\def\worddistinct{distinct}
-\def\wordexample{example}
-\def\wordcode{code}
-
-% Default is `distinct'.
-\kbdinputstyle distinct
-
-\def\xkey{\key}
-\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
-\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
-\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi}
-
-% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
-\let\indicateurl=\code
-\let\env=\code
+% For @command, @env, @file, @option quotes seem unnecessary,
+% so use \code rather than \samp.
 \let\command=\code
-
-% @clicksequence{File @click{} Open ...}
-\def\clicksequence#1{\begingroup #1\endgroup}
-
-% @clickstyle @arrow   (by default)
-\parseargdef\clickstyle{\def\click{#1}}
-\def\click{\arrow}
+\let\env=\code
+\let\file=\code
+\let\option=\code
 
 % @uref (abbreviation for `urlref') takes an optional (comma-separated)
 % second argument specifying the text to display and an optional third
 % arg as text to display instead of (rather than in addition to) the url
-% itself.  First (mandatory) arg is the url.  Perhaps eventually put in
-% a hypertex \special here.
-%
-\def\uref#1{\douref #1,,,\finish}
-\def\douref#1,#2,#3,#4\finish{\begingroup
+% itself.  First (mandatory) arg is the url.
+% (This \urefnobreak definition isn't used now, leaving it for a while
+% for comparison.)
+\def\urefnobreak#1{\dourefnobreak #1,,,\finish}
+\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup
   \unsepspaces
   \pdfurl{#1}%
   \setbox0 = \hbox{\ignorespaces #3}%
@@ -2763,6 +2576,103 @@
   \endlink
 \endgroup}
 
+% This \urefbreak definition is the active one.
+\def\urefbreak{\begingroup \urefcatcodes \dourefbreak}
+\let\uref=\urefbreak
+\def\dourefbreak#1{\urefbreakfinish #1,,,\finish}
+\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example
+  \unsepspaces
+  \pdfurl{#1}%
+  \setbox0 = \hbox{\ignorespaces #3}%
+  \ifdim\wd0 > 0pt
+    \unhbox0 % third arg given, show only that
+  \else
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0 > 0pt
+      \ifpdf
+        \unhbox0             % PDF: 2nd arg given, show only it
+      \else
+        \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url
+      \fi
+    \else
+      \urefcode{#1}% only url given, so show it
+    \fi
+  \fi
+  \endlink
+\endgroup}
+
+% Allow line breaks around only a few characters (only).
+\def\urefcatcodes{%
+  \catcode\ampChar=\active   \catcode\dotChar=\active
+  \catcode\hashChar=\active  \catcode\questChar=\active
+  \catcode\slashChar=\active
+}
+{
+  \urefcatcodes
+  %
+  \global\def\urefcode{\begingroup
+    \setupmarkupstyle{code}%
+    \urefcatcodes
+    \let&\urefcodeamp
+    \let.\urefcodedot
+    \let#\urefcodehash
+    \let?\urefcodequest
+    \let/\urefcodeslash
+    \codex
+  }
+  %
+  % By default, they are just regular characters.
+  \global\def&{\normalamp}
+  \global\def.{\normaldot}
+  \global\def#{\normalhash}
+  \global\def?{\normalquest}
+  \global\def/{\normalslash}
+}
+
+% we put a little stretch before and after the breakable chars, to help
+% line breaking of long url's.  The unequal skips make look better in
+% cmtt at least, especially for dots.
+\def\urefprestretch{\urefprebreak \hskip0pt plus.13em }
+\def\urefpoststretch{\urefpostbreak \hskip0pt plus.1em }
+%
+\def\urefcodeamp{\urefprestretch \&\urefpoststretch}
+\def\urefcodedot{\urefprestretch .\urefpoststretch}
+\def\urefcodehash{\urefprestretch \#\urefpoststretch}
+\def\urefcodequest{\urefprestretch ?\urefpoststretch}
+\def\urefcodeslash{\futurelet\next\urefcodeslashfinish}
+{
+  \catcode`\/=\active
+  \global\def\urefcodeslashfinish{%
+    \urefprestretch \slashChar
+    % Allow line break only after the final / in a sequence of
+    % slashes, to avoid line break between the slashes in http://.
+    \ifx\next/\else \urefpoststretch \fi
+  }
+}
+
+% One more complication: by default we'll break after the special
+% characters, but some people like to break before the special chars, so
+% allow that.  Also allow no breaking at all, for manual control.
+% 
+\parseargdef\urefbreakstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\wordnone
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordbefore
+    \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordafter
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak}
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @urefbreakstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\wordafter{after}
+\def\wordbefore{before}
+\def\wordnone{none}
+
+\urefbreakstyle after
+
 % @url synonym for @uref, since that's how everyone uses it.
 %
 \let\url=\uref
@@ -2784,6 +2694,67 @@
   \let\email=\uref
 \fi
 
+% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
+%   `example' (@kbd uses ttsl only inside of @example and friends),
+%   or `code' (@kbd uses normal tty font always).
+\parseargdef\kbdinputstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\worddistinct
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
+  \else\ifx\txiarg\wordexample
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
+  \else\ifx\txiarg\wordcode
+    \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @kbdinputstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\worddistinct{distinct}
+\def\wordexample{example}
+\def\wordcode{code}
+
+% Default is `distinct'.
+\kbdinputstyle distinct
+
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}}
+
+\def\xkey{\key}
+\def\kbdsub#1#2#3\par{%
+  \def\one{#1}\def\three{#3}\def\threex{??}%
+  \ifx\one\xkey\ifx\threex\three \key{#2}%
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+}
+
+% definition of @key that produces a lozenge.  Doesn't adjust to text size.
+%\setfont\keyrm\rmshape{8}{1000}{OT1}
+%\font\keysy=cmsy9
+%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+%  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+%    \vbox{\hrule\kern-0.4pt
+%     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+%    \kern-0.4pt\hrule}%
+%  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+
+% definition of @key with no lozenge.  If the current font is already
+% monospace, don't change it; that way, we respect @kbdinputstyle.  But
+% if it isn't monospace, then use \tt.
+%
+\def\key#1{{\setupmarkupstyle{key}%
+  \nohyphenation
+  \ifmonospace\else\tt\fi
+  #1}\null}
+
+% @clicksequence{File @click{} Open ...}
+\def\clicksequence#1{\begingroup #1\endgroup}
+
+% @clickstyle @arrow   (by default)
+\parseargdef\clickstyle{\def\click{#1}}
+\def\click{\arrow}
+
 % Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
 % argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
 %
@@ -2805,6 +2776,7 @@
   \ifx\temp\empty \else
     \space ({\unsepspaces \ignorespaces \temp \unskip})%
   \fi
+  \null % reset \spacefactor=1000
 }
 
 % @abbr for "Comput. J." and the like.
@@ -2817,10 +2789,222 @@
   \ifx\temp\empty \else
     \space ({\unsepspaces \ignorespaces \temp \unskip})%
   \fi
+  \null % reset \spacefactor=1000
+}
+
+% @asis just yields its argument.  Used with @table, for example.
+%
+\def\asis#1{#1}
+
+% @math outputs its argument in math mode.
+%
+% One complication: _ usually means subscripts, but it could also mean
+% an actual _ character, as in @math{@var{some_variable} + 1}.  So make
+% _ active, and distinguish by seeing if the current family is \slfam,
+% which is what @var uses.
+{
+  \catcode`\_ = \active
+  \gdef\mathunderscore{%
+    \catcode`\_=\active
+    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+  }
+}
+% Another complication: we want \\ (and @\) to output a math (or tt) \.
+% FYI, plain.tex uses \\ as a temporary control sequence (for no
+% particular reason), but this is not advertised and we don't care.
+%
+% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
+\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
+%
+\def\math{%
+  \tex
+  \mathunderscore
+  \let\\ = \mathbackslash
+  \mathactive
+  % make the texinfo accent commands work in math mode
+  \let\"=\ddot
+  \let\'=\acute
+  \let\==\bar
+  \let\^=\hat
+  \let\`=\grave
+  \let\u=\breve
+  \let\v=\check
+  \let\~=\tilde
+  \let\dotaccent=\dot
+  $\finishmath
+}
+\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
+
+% Some active characters (such as <) are spaced differently in math.
+% We have to reset their definitions in case the @math was an argument
+% to a command which sets the catcodes (such as @item or @section).
+%
+{
+  \catcode`^ = \active
+  \catcode`< = \active
+  \catcode`> = \active
+  \catcode`+ = \active
+  \catcode`' = \active
+  \gdef\mathactive{%
+    \let^ = \ptexhat
+    \let< = \ptexless
+    \let> = \ptexgtr
+    \let+ = \ptexplus
+    \let' = \ptexquoteright
+  }
+}
+
+% ctrl is no longer a Texinfo command, but leave this definition for fun.
+\def\ctrl #1{{\tt \rawbackslash \hat}#1}
+
+% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
+% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
+% except specified as a normal braced arg, so no newlines to worry about.
+% 
+\def\outfmtnametex{tex}
+%
+\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
+\long\def\doinlinefmt#1,#2,\finish{%
+  \def\inlinefmtname{#1}%
+  \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
+}
+% For raw, must switch into @tex before parsing the argument, to avoid
+% setting catcodes prematurely.  Doing it this way means that, for
+% example, @inlineraw{html, foo{bar} gets a parse error instead of being
+% ignored.  But this isn't important because if people want a literal
+% *right* brace they would have to use a command anyway, so they may as
+% well use a command to get a left brace too.  We could re-use the
+% delimiter character idea from \verb, but it seems like overkill.
+% 
+\long\def\inlineraw{\tex \doinlineraw}
+\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
+\def\doinlinerawtwo#1,#2,\finish{%
+  \def\inlinerawname{#1}%
+  \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi
+  \endgroup % close group opened by \tex.
 }
 
 
 \message{glyphs,}
+% and logos.
+
+% @@ prints an @, as does @atchar{}.
+\def\@{\char64 }
+\let\atchar=\@
+
+% @{ @} @lbracechar{} @rbracechar{} all generate brace characters.
+% Unless we're in typewriter, use \ecfont because the CM text fonts do
+% not have braces, and we don't want to switch into math.
+\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}}
+\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}}
+\let\{=\mylbrace \let\lbracechar=\{
+\let\}=\myrbrace \let\rbracechar=\}
+\begingroup
+  % Definitions to produce \{ and \} commands for indices,
+  % and @{ and @} for the aux/toc files.
+  \catcode`\{ = \other \catcode`\} = \other
+  \catcode`\[ = 1 \catcode`\] = 2
+  \catcode`\! = 0 \catcode`\\ = \other
+  !gdef!lbracecmd[\{]%
+  !gdef!rbracecmd[\}]%
+  !gdef!lbraceatcmd[@{]%
+  !gdef!rbraceatcmd[@}]%
+!endgroup
+
+% @comma{} to avoid , parsing problems.
+\let\comma = ,
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
+\let\, = \ptexc
+\let\dotaccent = \ptexdot
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \ptext
+\let\ubaraccent = \ptexb
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown @ordf @ordm
+% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
+\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+  \def\temp{#1}%
+  \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
+  \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
+  \else \errmessage{@dotless can be used only with i or j}%
+  \fi\fi
+}
+
+% The \TeX{} logo, as in plain, but resetting the spacing so that a
+% period following counts as ending a sentence.  (Idea found in latex.)
+%
+\edef\TeX{\TeX \spacefactor=1000 }
+
+% @LaTeX{} logo.  Not quite the same results as the definition in
+% latex.ltx, since we use a different font for the raised A; it's most
+% convenient for us to use an explicitly smaller font, rather than using
+% the \scriptstyle font (since we don't reset \scriptstyle and
+% \scriptscriptstyle).
+%
+\def\LaTeX{%
+  L\kern-.36em
+  {\setbox0=\hbox{T}%
+   \vbox to \ht0{\hbox{%
+     \ifx\textnominalsize\xwordpt
+       % for 10pt running text, \lllsize (8pt) is too small for the A in LaTeX.
+       % Revert to plain's \scriptsize, which is 7pt.
+       \count255=\the\fam $\fam\count255 \scriptstyle A$%
+     \else
+       % For 11pt, we can use our lllsize.
+       \selectfonts\lllsize A%
+     \fi
+     }%
+     \vss
+  }}%
+  \kern-.15em
+  \TeX
+}
+
+% Some math mode symbols.
+\def\bullet{$\ptexbullet$}
+\def\geq{\ifmmode \ge\else $\ge$\fi}
+\def\leq{\ifmmode \le\else $\le$\fi}
+\def\minus{\ifmmode -\else $-$\fi}
+
+% @dots{} outputs an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em.  So do
+% whichever is larger.
+%
+\def\dots{%
+  \leavevmode
+  \setbox0=\hbox{...}% get width of three periods
+  \ifdim\wd0 > 1.5em
+    \dimen0 = \wd0
+  \else
+    \dimen0 = 1.5em
+  \fi
+  \hbox to \dimen0{%
+    \hskip 0pt plus.25fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus.5fil
+  }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+  \dots
+  \spacefactor=\endofsentencespacefactor
+}
 
 % @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
 %
@@ -2842,7 +3026,7 @@
 {\tentt \global\dimen0 = 3em}% Width of the box.
 \dimen2 = .55pt % Thickness of rules
 % The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt}
+\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt}
 %
 \setbox\errorbox=\hbox to \dimen0{\hfil
    \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
@@ -2963,12 +3147,17 @@
   % hopefully nobody will notice/care.
   \edef\ecsize{\csname\curfontsize ecsize\endcsname}%
   \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
-  \ifx\curfontstyle\bfstylename
-    % bold:
-    \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
+  \ifmonospace
+    % typewriter:
+    \font\thisecfont = ectt\ecsize \space at \nominalsize
   \else
-    % regular:
-    \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+    \ifx\curfontstyle\bfstylename
+      % bold:
+      \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
+    \else
+      % regular:
+      \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+    \fi
   \fi
   \thisecfont
 }
@@ -2991,7 +3180,7 @@
 %  Textures 1.7.7 (preloaded format=plain 93.10.14)  (68K)  16 APR 2004 02:38
 % so we'll define it if necessary.
 %
-\ifx\Orb\undefined
+\ifx\Orb\thisisundefined
 \def\Orb{\mathhexbox20D}
 \fi
 
@@ -3019,8 +3208,9 @@
 \newif\ifsetshortcontentsaftertitlepage
  \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
 
-\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
-        \endgroup\page\hbox{}\page}
+\parseargdef\shorttitlepage{%
+  \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+  \endgroup\page\hbox{}\page}
 
 \envdef\titlepage{%
   % Open one extra group, as we want to close it in the middle of \Etitlepage.
@@ -3080,14 +3270,28 @@
   \finishedtitlepagetrue
 }
 
-%%% Macros to be used within @titlepage:
+% Settings used for typesetting titles: no hyphenation, no indentation,
+% don't worry much about spacing, ragged right.  This should be used
+% inside a \vbox, and fonts need to be set appropriately first.  Because
+% it is always used for titles, nothing else, we call \rmisbold.  \par
+% should be specified before the end of the \vbox, since a vbox is a group.
+% 
+\def\raggedtitlesettings{%
+  \rmisbold
+  \hyphenpenalty=10000
+  \parindent=0pt
+  \tolerance=5000
+  \ptexraggedright
+}
+
+% Macros to be used within @titlepage:
 
 \let\subtitlerm=\tenrm
 \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
 
 \parseargdef\title{%
   \checkenv\titlepage
-  \leftline{\titlefonts\rmisbold #1}
+  \vbox{\titlefonts \raggedtitlesettings #1\par}%
   % print a rule at the page bottom also.
   \finishedtitlepagefalse
   \vskip4pt \hrule height 4pt width \hsize \vskip4pt
@@ -3113,7 +3317,7 @@
 }
 
 
-%%% Set up page headings and footings.
+% Set up page headings and footings.
 
 \let\thispage=\folio
 
@@ -3207,10 +3411,14 @@
 
 \def\headings #1 {\csname HEADINGS#1\endcsname}
 
-\def\HEADINGSoff{%
-\global\evenheadline={\hfil} \global\evenfootline={\hfil}
-\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
-\HEADINGSoff
+\def\headingsoff{% non-global headings elimination
+  \evenheadline={\hfil}\evenfootline={\hfil}%
+   \oddheadline={\hfil}\oddfootline={\hfil}%
+}
+
+\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting
+\HEADINGSoff  % it's the default
+
 % When we turn headings on, set the page number to 1.
 % For double-sided printing, put current file name in lower left corner,
 % chapter name on inside top of right hand pages, document
@@ -3261,7 +3469,7 @@
 % This produces Day Month Year style of output.
 % Only define if not already defined, in case a txi-??.tex file has set
 % up a different format (e.g., txi-cs.tex does this).
-\ifx\today\undefined
+\ifx\today\thisisundefined
 \def\today{%
   \number\day\space
   \ifcase\month
@@ -3322,7 +3530,7 @@
     \begingroup
       \advance\leftskip by-\tableindent
       \advance\hsize by\tableindent
-      \advance\rightskip by0pt plus1fil
+      \advance\rightskip by0pt plus1fil\relax
       \leavevmode\unhbox0\par
     \endgroup
     %
@@ -3808,18 +4016,18 @@
 \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
 \global\advance\multitablelinespace by-\ht0
 \fi
-%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
-%%        If so, set to same dimension as multitablelinespace.
+% Test to see if parskip is larger than space between lines of
+% table. If not, do nothing.
+%        If so, set to same dimension as multitablelinespace.
 \ifdim\multitableparskip>\multitablelinespace
 \global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
-                                      %% than skip between lines in the table.
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
 \fi%
 \ifdim\multitableparskip=0pt
 \global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
-                                      %% than skip between lines in the table.
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
 \fi}
 
 
@@ -3980,7 +4188,7 @@
     % ..., but we might end up with active ones in the argument if
     % we're called from @code, as @code{@value{foo-bar_}}, though.
     % So \let them to their normal equivalents.
-    \let-\realdash \let_\normalunderscore
+    \let-\normaldash \let_\normalunderscore
   }
 }
 
@@ -4020,7 +4228,7 @@
 }
 \def\ifsetfail{\doignore{ifset}}
 
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% @ifclear VAR ... @end executes the `...' iff VAR has never been
 % defined with @set, or has been undefined with @clear.
 %
 % The `\else' inside the `\doifset' parameter is a trick to reuse the
@@ -4031,6 +4239,35 @@
 \def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
 \def\ifclearfail{\doignore{ifclear}}
 
+% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written
+% without the @) is in fact defined.  We can only feasibly check at the
+% TeX level, so something like `mathcode' is going to considered
+% defined even though it is not a Texinfo command.
+% 
+\makecond{ifcommanddefined}
+\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
+%
+\def\doifcmddefined#1#2{{%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname #2\endcsname\relax
+      #1% If not defined, \let\next as above.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifcmddefinedfail{\doignore{ifcommanddefined}}
+
+% @ifcommandnotdefined CMD ... handled similar to @ifclear above.
+\makecond{ifcommandnotdefined}
+\def\ifcommandnotdefined{%
+  \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}}
+\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}}
+
+% Set the `txicommandconditionals' variable, so documents have a way to
+% test if the @ifcommand...defined conditionals are available.
+\set txicommandconditionals
+
 % @dircategory CATEGORY  -- specify a category of the dir file
 % which this file should belong to.  Ignore this in TeX.
 \let\dircategory=\comment
@@ -4134,11 +4371,14 @@
   \def\@{@}% change to @@ when we switch to @ as escape char in index files.
   \def\ {\realbackslash\space }%
   %
-  % Need these in case \tex is in effect and \{ is a \delimiter again.
-  % But can't use \lbracecmd and \rbracecmd because texindex assumes
-  % braces and backslashes are used only as delimiters.
-  \let\{ = \mylbrace
-  \let\} = \myrbrace
+  % Need these unexpandable (because we define \tt as a dummy)
+  % definitions when @{ or @} appear in index entry text.  Also, more
+  % complicated, when \tex is in effect and \{ is a \delimiter again.
+  % We can't use \lbracecmd and \rbracecmd because texindex assumes
+  % braces and backslashes are used only as delimiters.  Perhaps we
+  % should define @lbrace and @rbrace commands a la @comma.
+  \def\{{{\tt\char123}}%
+  \def\}{{\tt\char125}}%
   %
   % I don't entirely understand this, but when an index entry is
   % generated from a macro call, the \endinput which \scanmacro inserts
@@ -4191,7 +4431,7 @@
 \def\commondummies{%
   %
   % \definedummyword defines \#1 as \string\#1\space, thus effectively
-  % preventing its expansion.  This is used only for control% words,
+  % preventing its expansion.  This is used only for control words,
   % not control letters, because the \space would be incorrect for
   % control characters, but is needed to separate the control word
   % from whatever follows.
@@ -4210,6 +4450,7 @@
   \commondummiesnofonts
   %
   \definedummyletter\_%
+  \definedummyletter\-%
   %
   % Non-English letters.
   \definedummyword\AA
@@ -4246,20 +4487,25 @@
   \definedummyword\TeX
   %
   % Assorted special characters.
+  \definedummyword\arrow
   \definedummyword\bullet
   \definedummyword\comma
   \definedummyword\copyright
   \definedummyword\registeredsymbol
   \definedummyword\dots
   \definedummyword\enddots
+  \definedummyword\entrybreak
   \definedummyword\equiv
   \definedummyword\error
   \definedummyword\euro
+  \definedummyword\expansion
+  \definedummyword\geq
   \definedummyword\guillemetleft
   \definedummyword\guillemetright
   \definedummyword\guilsinglleft
   \definedummyword\guilsinglright
-  \definedummyword\expansion
+  \definedummyword\lbracechar
+  \definedummyword\leq
   \definedummyword\minus
   \definedummyword\ogonek
   \definedummyword\pounds
@@ -4271,6 +4517,7 @@
   \definedummyword\quoteleft
   \definedummyword\quoteright
   \definedummyword\quotesinglbase
+  \definedummyword\rbracechar
   \definedummyword\result
   \definedummyword\textdegree
   %
@@ -4316,19 +4563,27 @@
   \definedummyword\b
   \definedummyword\i
   \definedummyword\r
+  \definedummyword\sansserif
   \definedummyword\sc
+  \definedummyword\slanted
   \definedummyword\t
   %
   % Commands that take arguments.
+  \definedummyword\abbr
   \definedummyword\acronym
+  \definedummyword\anchor
   \definedummyword\cite
   \definedummyword\code
   \definedummyword\command
   \definedummyword\dfn
+  \definedummyword\dmn
   \definedummyword\email
   \definedummyword\emph
   \definedummyword\env
   \definedummyword\file
+  \definedummyword\image
+  \definedummyword\indicateurl
+  \definedummyword\inforef
   \definedummyword\kbd
   \definedummyword\key
   \definedummyword\math
@@ -4356,7 +4611,7 @@
   \def\definedummyaccent##1{\let##1\asis}%
   % We can just ignore other control letters.
   \def\definedummyletter##1{\let##1\empty}%
-  % Hopefully, all control words can become @asis.
+  % All control words become @asis by default; overrides below.
   \let\definedummyword\definedummyaccent
   %
   \commondummiesnofonts
@@ -4368,8 +4623,17 @@
   %
   \def\ { }%
   \def\@{@}%
-  % how to handle braces?
   \def\_{\normalunderscore}%
+  \def\-{}% @- shouldn't affect sorting
+  %
+  % Unfortunately, texindex is not prepared to handle braces in the
+  % content at all.  So for index sorting, we map @{ and @} to strings
+  % starting with |, since that ASCII character is between ASCII { and }.
+  \def\{{|a}%
+  \def\lbracechar{|a}%
+  %
+  \def\}{|b}%
+  \def\rbracechar{|b}%
   %
   % Non-English letters.
   \def\AA{AA}%
@@ -4397,6 +4661,7 @@
   %
   % Assorted special characters.
   % (The following {} will end up in the sort string, but that's ok.)
+  \def\arrow{->}%
   \def\bullet{bullet}%
   \def\comma{,}%
   \def\copyright{copyright}%
@@ -4406,10 +4671,12 @@
   \def\error{error}%
   \def\euro{euro}%
   \def\expansion{==>}%
+  \def\geq{>=}%
   \def\guillemetleft{<<}%
   \def\guillemetright{>>}%
   \def\guilsinglleft{<}%
   \def\guilsinglright{>}%
+  \def\leq{<=}%
   \def\minus{-}%
   \def\point{.}%
   \def\pounds{pounds}%
@@ -4424,6 +4691,9 @@
   \def\result{=>}%
   \def\textdegree{o}%
   %
+  \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax
+  \else \indexlquoteignore \fi
+  %
   % We need to get rid of all macros, leaving only the arguments (if present).
   % Of course this is not nearly correct, but it is the best we can do for now.
   % makeinfo does not expand macros in the argument to @deffn, which ends up
@@ -4437,6 +4707,11 @@
   \macrolist
 }
 
+% Undocumented (for FSFS 2nd ed.): @set txiindexlquoteignore makes us
+% ignore left quotes in the sort term.
+{\catcode`\`=\active
+ \gdef\indexlquoteignore{\let`=\empty}}
+
 \let\indexbackslash=0  %overridden during \printindex.
 \let\SETmarginindex=\relax % put index entries in margin (undocumented)?
 
@@ -4534,10 +4809,9 @@
 %
 % ..., ready, GO:
 %
-\def\safewhatsit#1{%
-\ifhmode
+\def\safewhatsit#1{\ifhmode
   #1%
-\else
+ \else
   % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
   \whatsitskip = \lastskip
   \edef\lastskipmacro{\the\lastskip}%
@@ -4561,7 +4835,6 @@
     % to re-insert the same penalty (values >10000 are used for various
     % signals); since we just inserted a non-discardable item, any
     % following glue (such as a \parskip) would be a breakpoint.  For example:
-    %
     %   @deffn deffn-whatever
     %   @vindex index-whatever
     %   Description.
@@ -4574,8 +4847,7 @@
     % (the whatsit from the \write), so we must insert a \nobreak.
     \nobreak\vskip\whatsitskip
   \fi
-\fi
-}
+\fi}
 
 % The index entry written in the file actually looks like
 %  \entry {sortstring}{page}{topic}
@@ -4694,7 +4966,6 @@
 % But this freezes the catcodes in the argument, and can cause problems to
 % @code, which sets - active.  This problem was fixed by a kludge---
 % ``-'' was active throughout whole index, but this isn't really right.
-%
 % The right solution is to prevent \entry from swallowing the whole text.
 %                                 --kasal, 21nov03
 \def\entry{%
@@ -4731,10 +5002,17 @@
     % columns.
     \vskip 0pt plus1pt
     %
+    % When reading the text of entry, convert explicit line breaks
+    % from @* into spaces.  The user might give these in long section
+    % titles, for instance.
+    \def\*{\unskip\space\ignorespaces}%
+    \def\entrybreak{\hfil\break}%
+    %
     % Swallow the left brace of the text (first parameter):
     \afterassignment\doentry
     \let\temp =
 }
+\def\entrybreak{\unskip\space\ignorespaces}%
 \def\doentry{%
     \bgroup % Instead of the swallowed brace.
       \noindent
@@ -4967,7 +5245,22 @@
 \message{sectioning,}
 % Chapters, sections, etc.
 
-% \unnumberedno is an oxymoron, of course.  But we count the unnumbered
+% Let's start with @part.
+\outer\parseargdef\part{\partzzz{#1}}
+\def\partzzz#1{%
+  \chapoddpage
+  \null
+  \vskip.3\vsize  % move it down on the page a bit
+  \begingroup
+    \noindent \titlefonts\rmisbold #1\par % the text
+    \let\lastnode=\empty      % no node to associate with
+    \writetocentry{part}{#1}{}% but put it in the toc
+    \headingsoff              % no headline or footline on the part page
+    \chapoddpage
+  \endgroup
+}
+
+% \unnumberedno is an oxymoron.  But we count the unnumbered
 % sections so that we can refer to them unambiguously in the pdf
 % outlines by their "section number".  We avoid collisions with chapter
 % numbers by starting them at 10000.  (If a document ever has 10000
@@ -5046,8 +5339,8 @@
 \chardef\maxseclevel = 3
 %
 % A numbered section within an unnumbered changes to unnumbered too.
-% To achive this, remember the "biggest" unnum. sec. we are currently in:
-\chardef\unmlevel = \maxseclevel
+% To achieve this, remember the "biggest" unnum. sec. we are currently in:
+\chardef\unnlevel = \maxseclevel
 %
 % Trace whether the current chapter is an appendix or not:
 % \chapheadtype is "N" or "A", unnumbered chapters are ignored.
@@ -5072,8 +5365,8 @@
   % The heading type:
   \def\headtype{#1}%
   \if \headtype U%
-    \ifnum \absseclevel < \unmlevel
-      \chardef\unmlevel = \absseclevel
+    \ifnum \absseclevel < \unnlevel
+      \chardef\unnlevel = \absseclevel
     \fi
   \else
     % Check for appendix sections:
@@ -5085,10 +5378,10 @@
       \fi\fi
     \fi
     % Check for numbered within unnumbered:
-    \ifnum \absseclevel > \unmlevel
+    \ifnum \absseclevel > \unnlevel
       \def\headtype{U}%
     \else
-      \chardef\unmlevel = 3
+      \chardef\unnlevel = 3
     \fi
   \fi
   % Now print the heading:
@@ -5174,7 +5467,8 @@
   \global\let\subsubsection = \appendixsubsubsec
 }
 
-\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
+% normally unnmhead0 calls unnumberedzzz:
+\outer\parseargdef\unnumbered{\unnmhead0{#1}}
 \def\unnumberedzzz#1{%
   \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
     \global\advance\unnumberedno by 1
@@ -5218,40 +5512,47 @@
 \let\top\unnumbered
 
 % Sections.
+% 
 \outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
 \def\seczzz#1{%
   \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
   \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
 }
 
-\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz
+% normally calls appendixsectionzzz:
+\outer\parseargdef\appendixsection{\apphead1{#1}}
 \def\appendixsectionzzz#1{%
   \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
   \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
 }
 \let\appendixsec\appendixsection
 
-\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz
+% normally calls unnumberedseczzz:
+\outer\parseargdef\unnumberedsec{\unnmhead1{#1}}
 \def\unnumberedseczzz#1{%
   \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
   \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
 }
 
 % Subsections.
-\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz
+% 
+% normally calls numberedsubseczzz:
+\outer\parseargdef\numberedsubsec{\numhead2{#1}}
 \def\numberedsubseczzz#1{%
   \global\subsubsecno=0  \global\advance\subsecno by 1
   \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
 }
 
-\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz
+% normally calls appendixsubseczzz:
+\outer\parseargdef\appendixsubsec{\apphead2{#1}}
 \def\appendixsubseczzz#1{%
   \global\subsubsecno=0  \global\advance\subsecno by 1
   \sectionheading{#1}{subsec}{Yappendix}%
                  {\appendixletter.\the\secno.\the\subsecno}%
 }
 
-\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
+% normally calls unnumberedsubseczzz:
+\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}}
 \def\unnumberedsubseczzz#1{%
   \global\subsubsecno=0  \global\advance\subsecno by 1
   \sectionheading{#1}{subsec}{Ynothing}%
@@ -5259,21 +5560,25 @@
 }
 
 % Subsubsections.
-\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz
+% 
+% normally numberedsubsubseczzz:
+\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
 \def\numberedsubsubseczzz#1{%
   \global\advance\subsubsecno by 1
   \sectionheading{#1}{subsubsec}{Ynumbered}%
                  {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
 }
 
-\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz
+% normally appendixsubsubseczzz:
+\outer\parseargdef\appendixsubsubsec{\apphead3{#1}}
 \def\appendixsubsubseczzz#1{%
   \global\advance\subsubsecno by 1
   \sectionheading{#1}{subsubsec}{Yappendix}%
                  {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
 }
 
-\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
+% normally unnumberedsubsubseczzz:
+\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}}
 \def\unnumberedsubsubseczzz#1{%
   \global\advance\subsubsecno by 1
   \sectionheading{#1}{subsubsec}{Ynothing}%
@@ -5289,14 +5594,6 @@
 
 % Define @majorheading, @heading and @subheading
 
-% NOTE on use of \vbox for chapter headings, section headings, and such:
-%       1) We use \vbox rather than the earlier \line to permit
-%          overlong headings to fold.
-%       2) \hyphenpenalty is set to 10000 because hyphenation in a
-%          heading is obnoxious; this forbids it.
-%       3) Likewise, headings look best if no \parindent is used, and
-%          if justification is not attempted.  Hence \raggedright.
-
 \def\majorheading{%
   {\advance\chapheadingskip by 10pt \chapbreak }%
   \parsearg\chapheadingzzz
@@ -5304,10 +5601,8 @@
 
 \def\chapheading{\chapbreak \parsearg\chapheadingzzz}
 \def\chapheadingzzz#1{%
-  {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                    \parindent=0pt\ptexraggedright
-                    \rmisbold #1\hfill}}%
-  \bigskip \par\penalty 200\relax
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip \nobreak
   \suppressfirstparagraphindent
 }
 
@@ -5323,14 +5618,13 @@
 % (including whitespace, linebreaking, etc. around it),
 % given all the information in convenient, parsed form.
 
-%%% Args are the skip and penalty (usually negative)
+% Args are the skip and penalty (usually negative)
 \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
 
-%%% Define plain chapter starts, and page on/off switching for it
 % Parameter controlling skip before chapter headings (if needed)
-
 \newskip\chapheadingskip
 
+% Define plain chapter starts, and page on/off switching for it.
 \def\chapbreak{\dobreak \chapheadingskip {-4000}}
 \def\chappager{\par\vfill\supereject}
 % Because \domark is called before \chapoddpage, the filler page will
@@ -5340,9 +5634,8 @@
   \chappager
   \ifodd\pageno \else
     \begingroup
-      \evenheadline={\hfil}\evenfootline={\hfil}%
-      \oddheadline={\hfil}\oddfootline={\hfil}%
-      \hbox to 0pt{}%
+      \headingsoff
+      \null
       \chappager
     \endgroup
   \fi
@@ -5468,8 +5761,7 @@
     %
     % Typeset the actual heading.
     \nobreak % Avoid page breaks at the interline glue.
-    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
-          \hangindent=\wd0 \centerparametersmaybe
+    \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe
           \unhbox0 #1\par}%
   }%
   \nobreak\bigskip % no page break after a chapter title
@@ -5491,18 +5783,18 @@
 \def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
 %
 \def\unnchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                       \parindent=0pt\ptexraggedright
-                       \rmisbold #1\hfill}}\bigskip \par\nobreak
+  \chapoddpage
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip\nobreak
 }
 \def\chfopen #1#2{\chapoddpage {\chapfonts
 \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
 \par\penalty 5000 %
 }
 \def\centerchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                       \parindent=0pt
-                       \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak
+  \chapoddpage
+  \vbox{\chapfonts \raggedtitlesettings \hfill #1\hfill}%
+  \nobreak\bigskip \nobreak
 }
 \def\CHAPFopen{%
   \global\let\chapmacro=\chfopen
@@ -5534,6 +5826,8 @@
 %
 \def\sectionheading#1#2#3#4{%
   {%
+    \checkenv{}% should not be in an environment.
+    %
     % Switch to the right set of fonts.
     \csname #2fonts\endcsname \rmisbold
     %
@@ -5645,15 +5939,15 @@
   %
   % We'll almost certainly start a paragraph next, so don't let that
   % glue accumulate.  (Not a breakpoint because it's preceded by a
-  % discardable item.)
+  % discardable item.)  However, when a paragraph is not started next
+  % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out
+  % or the negative glue will cause weirdly wrong output, typically
+  % obscuring the section heading with something else.
   \vskip-\parskip
   %
-  % This is purely so the last item on the list is a known \penalty >
-  % 10000.  This is so \startdefun can avoid allowing breakpoints after
-  % section headings.  Otherwise, it would insert a valid breakpoint between:
-  %
-  %   @section sec-whatever
-  %   @deffn def-whatever
+  % This is so the last item on the main vertical list is a known
+  % \penalty > 10000, so \startdefun, etc., can recognize the situation
+  % and do the needful.
   \penalty 10001
 }
 
@@ -5785,6 +6079,7 @@
 \def\summarycontents{%
   \startcontents{\putwordShortTOC}%
     %
+    \let\partentry = \shortpartentry
     \let\numchapentry = \shortchapentry
     \let\appentry = \shortchapentry
     \let\unnchapentry = \shortunnchapentry
@@ -5840,6 +6135,19 @@
 % The last argument is the page number.
 % The arguments in between are the chapter number, section number, ...
 
+% Parts, in the main contents.  Replace the part number, which doesn't
+% exist, with an empty box.  Let's hope all the numbers have the same width.
+% Also ignore the page number, which is conventionally not printed.
+\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}}
+\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}}
+%
+% Parts, in the short toc.
+\def\shortpartentry#1#2#3#4{%
+  \penalty-300
+  \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip
+  \shortchapentry{{\bf #1}}{\numeralbox}{}{}%
+}
+
 % Chapters, in the main contents.
 \def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
 %
@@ -5929,9 +6237,9 @@
 \message{environments,}
 % @foo ... @end foo.
 
-% @tex ... @end tex    escapes into raw Tex temporarily.
+% @tex ... @end tex    escapes into raw TeX temporarily.
 % One exception: @ is still an escape character, so that @end tex works.
-% But \@ or @@ will get a plain tex @ character.
+% But \@ or @@ will get a plain @ character.
 
 \envdef\tex{%
   \setupmarkupstyle{tex}%
@@ -5948,6 +6256,10 @@
   \catcode`\'=\other
   \escapechar=`\\
   %
+  % ' is active in math mode (mathcode"8000).  So reset it, and all our
+  % other math active characters (just in case), to plain's definitions.
+  \mathactive
+  %
   \let\b=\ptexb
   \let\bullet=\ptexbullet
   \let\c=\ptexc
@@ -6051,6 +6363,12 @@
   \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
   % Flag to tell @lisp, etc., not to narrow margin.
   \let\nonarrowing = t%
+  %
+  % If this cartouche directly follows a sectioning command, we need the
+  % \parskip glue (backspaced over by default) or the cartouche can
+  % collide with the section heading.
+  \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi
+  %
   \vbox\bgroup
       \baselineskip=0pt\parskip=0pt\lineskip=0pt
       \carttop
@@ -6064,7 +6382,7 @@
 	      \lineskip=\normlskip
 	      \parskip=\normpskip
 	      \vskip -\parskip
-	      \comment % For explanation, see the end of \def\group.
+	      \comment % For explanation, see the end of def\group.
 }
 \def\Ecartouche{%
               \ifhmode\par\fi
@@ -6150,41 +6468,42 @@
 }
 
 % We often define two environments, @foo and @smallfoo.
-% Let's do it by one command:
-\def\makedispenv #1#2{
-  \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}
-  \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}
+% Let's do it in one command.  #1 is the env name, #2 the definition.
+\def\makedispenvdef#1#2{%
+  \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}%
+  \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}%
   \expandafter\let\csname E#1\endcsname \afterenvbreak
   \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
 }
 
-% Define two synonyms:
-\def\maketwodispenvs #1#2#3{
-  \makedispenv{#1}{#3}
-  \makedispenv{#2}{#3}
+% Define two environment synonyms (#1 and #2) for an environment.
+\def\maketwodispenvdef#1#2#3{%
+  \makedispenvdef{#1}{#3}%
+  \makedispenvdef{#2}{#3}%
 }
-
-% @lisp: indented, narrowed, typewriter font; @example: same as @lisp.
+%
+% @lisp: indented, narrowed, typewriter font;
+% @example: same as @lisp.
 %
 % @smallexample and @smalllisp: use smaller fonts.
 % Originally contributed by Pavel@xerox.
 %
-\maketwodispenvs {lisp}{example}{%
+\maketwodispenvdef{lisp}{example}{%
   \nonfillstart
   \tt\setupmarkupstyle{example}%
   \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
-  \gobble       % eat return
+  \gobble % eat return
 }
 % @display/@smalldisplay: same as @lisp except keep current font.
 %
-\makedispenv {display}{%
+\makedispenvdef{display}{%
   \nonfillstart
   \gobble
 }
 
 % @format/@smallformat: same as @display except don't narrow margins.
 %
-\makedispenv{format}{%
+\makedispenvdef{format}{%
   \let\nonarrowing = t%
   \nonfillstart
   \gobble
@@ -6203,7 +6522,7 @@
 \envdef\flushright{%
   \let\nonarrowing = t%
   \nonfillstart
-  \advance\leftskip by 0pt plus 1fill
+  \advance\leftskip by 0pt plus 1fill\relax
   \gobble
 }
 \let\Eflushright = \afterenvbreak
@@ -6238,43 +6557,28 @@
 % we're doing normal filling.  So, when using \aboveenvbreak and
 % \afterenvbreak, temporarily make \parskip 0.
 %
+\makedispenvdef{quotation}{\quotationstart}
+%
 \def\quotationstart{%
-  {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
-  \parindent=0pt
-  %
-  % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+  \indentedblockstart % same as \indentedblock, but increase right margin too.
   \ifx\nonarrowing\relax
-    \advance\leftskip by \lispnarrowing
     \advance\rightskip by \lispnarrowing
-    \exdentamount = \lispnarrowing
-  \else
-    \let\nonarrowing = \relax
   \fi
   \parsearg\quotationlabel
 }
 
-\envdef\quotation{%
-  \setnormaldispenv
-  \quotationstart
-}
-
-\envdef\smallquotation{%
-  \setsmalldispenv
-  \quotationstart
-}
-\let\Esmallquotation = \Equotation
-
 % We have retained a nonzero parskip for the environment, since we're
 % doing normal filling.
 %
 \def\Equotation{%
   \par
-  \ifx\quotationauthor\undefined\else
+  \ifx\quotationauthor\thisisundefined\else
     % indent a bit.
     \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
   \fi
   {\parskip=0pt \afterenvbreak}%
 }
+\def\Esmallquotation{\Equotation}
 
 % If we're given an argument, typeset it in bold with a colon after.
 \def\quotationlabel#1{%
@@ -6284,6 +6588,32 @@
   \fi
 }
 
+% @indentedblock is like @quotation, but indents only on the left and
+% has no optional argument.
+% 
+\makedispenvdef{indentedblock}{\indentedblockstart}
+%
+\def\indentedblockstart{%
+  {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
+  \parindent=0pt
+  %
+  % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+  \ifx\nonarrowing\relax
+    \advance\leftskip by \lispnarrowing
+    \exdentamount = \lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+}
+
+% Keep a nonzero parskip for the environment, since we're doing normal filling.
+%
+\def\Eindentedblock{%
+  \par
+  {\parskip=0pt \afterenvbreak}%
+}
+\def\Esmallindentedblock{\Eindentedblock}
+
 
 % LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
 % If we want to allow any <char> as delimiter,
@@ -6331,21 +6661,28 @@
 
 % Setup for the @verbatim environment
 %
-% Real tab expansion
+% Real tab expansion.
 \newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
 %
-\def\starttabbox{\setbox0=\hbox\bgroup}
+% We typeset each line of the verbatim in an \hbox, so we can handle
+% tabs.  The \global is in case the verbatim line starts with an accent,
+% or some other command that starts with a begin-group.  Otherwise, the
+% entire \verbbox would disappear at the corresponding end-group, before
+% it is typeset.  Meanwhile, we can't have nested verbatim commands
+% (can we?), so the \global won't be overwriting itself.
+\newbox\verbbox
+\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup}
 %
 \begingroup
   \catcode`\^^I=\active
   \gdef\tabexpand{%
     \catcode`\^^I=\active
     \def^^I{\leavevmode\egroup
-      \dimen0=\wd0 % the width so far, or since the previous tab
-      \divide\dimen0 by\tabw
-      \multiply\dimen0 by\tabw % compute previous multiple of \tabw
-      \advance\dimen0 by\tabw  % advance to next multiple of \tabw
-      \wd0=\dimen0 \box0 \starttabbox
+      \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab
+      \divide\dimen\verbbox by\tabw
+      \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw
+      \advance\dimen\verbbox by\tabw  % advance to next multiple of \tabw
+      \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox
     }%
   }
 \endgroup
@@ -6354,15 +6691,16 @@
 \def\setupverbatim{%
   \let\nonarrowing = t%
   \nonfillstart
-  % Easiest (and conventionally used) font for verbatim
-  \tt
-  \def\par{\leavevmode\egroup\box0\endgraf}%
+  \tt % easiest (and conventionally used) font for verbatim
+  % The \leavevmode here is for blank lines.  Otherwise, we would
+  % never \starttabox and the \egroup would end verbatim mode.
+  \def\par{\leavevmode\egroup\box\verbbox\endgraf}%
   \tabexpand
   \setupmarkupstyle{verbatim}%
   % Respect line breaks,
   % print special symbols as themselves, and
-  % make each space count
-  % must do in this order:
+  % make each space count.
+  % Must do in this order:
   \obeylines \uncatcodespecials \sepspaces
   \everypar{\starttabbox}%
 }
@@ -6419,6 +6757,7 @@
     \makevalueexpandable
     \setupverbatim
     \indexnofonts       % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}%
     \input #1
     \afterenvbreak
   }%
@@ -6468,7 +6807,7 @@
     % commands also insert a nobreak penalty, and we don't want to allow
     % a break between a section heading and a defun.
     %
-    % As a minor refinement, we avoid "club" headers by signalling
+    % As a further refinement, we avoid "club" headers by signalling
     % with penalty of 10003 after the very first @deffn in the
     % sequence (see above), and penalty of 10002 after any following
     % @def command.
@@ -6505,7 +6844,7 @@
     #1#2 \endheader
     % common ending:
     \interlinepenalty = 10000
-    \advance\rightskip by 0pt plus 1fil
+    \advance\rightskip by 0pt plus 1fil\relax
     \endgraf
     \nobreak\vskip -\parskip
     \penalty\defunpenalty  % signal to \startdefun and \dodefunx
@@ -6535,13 +6874,36 @@
 \def\domakedefun#1#2#3{%
   \envdef#1{%
     \startdefun
+    \doingtypefnfalse    % distinguish typed functions from all else
     \parseargusing\activeparens{\printdefunline#3}%
   }%
   \def#2{\dodefunx#1}%
   \def#3%
 }
 
-%%% Untyped functions:
+\newif\ifdoingtypefn       % doing typed function?
+\newif\ifrettypeownline    % typeset return type on its own line?
+
+% @deftypefnnewline on|off says whether the return type of typed functions
+% are printed on their own line.  This affects @deftypefn, @deftypefun,
+% @deftypeop, and @deftypemethod.
+% 
+\parseargdef\deftypefnnewline{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @txideftypefnnl value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% Untyped functions:
 
 % @deffn category name args
 \makedefun{deffn}{\deffngeneral{}}
@@ -6560,7 +6922,7 @@
   \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
 }
 
-%%% Typed functions:
+% Typed functions:
 
 % @deftypefn category type name args
 \makedefun{deftypefn}{\deftypefngeneral{}}
@@ -6575,10 +6937,11 @@
 %
 \def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
   \dosubind{fn}{\code{#4}}{#1}%
+  \doingtypefntrue
   \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
 }
 
-%%% Typed variables:
+% Typed variables:
 
 % @deftypevr category type var args
 \makedefun{deftypevr}{\deftypecvgeneral{}}
@@ -6596,7 +6959,7 @@
   \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
 }
 
-%%% Untyped variables:
+% Untyped variables:
 
 % @defvr category var args
 \makedefun{defvr}#1 {\deftypevrheader{#1} {} }
@@ -6607,7 +6970,8 @@
 % \defcvof {category of}class var args
 \def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
 
-%%% Type:
+% Types:
+
 % @deftp category name args
 \makedefun{deftp}#1 #2 #3\endheader{%
   \doind{tp}{\code{#2}}%
@@ -6635,25 +6999,49 @@
 % We are followed by (but not passed) the arguments, if any.
 %
 \def\defname#1#2#3{%
+  \par
   % Get the values of \leftskip and \rightskip as they were outside the @def...
   \advance\leftskip by -\defbodyindent
   %
-  % How we'll format the type name.  Putting it in brackets helps
+  % Determine if we are typesetting the return type of a typed function
+  % on a line by itself.
+  \rettypeownlinefalse
+  \ifdoingtypefn  % doing a typed function specifically?
+    % then check user option for putting return type on its own line:
+    \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else
+      \rettypeownlinetrue
+    \fi
+  \fi
+  %
+  % How we'll format the category name.  Putting it in brackets helps
   % distinguish it from the body text that may end up on the next line
   % just below it.
   \def\temp{#1}%
   \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
   %
-  % Figure out line sizes for the paragraph shape.
+  % Figure out line sizes for the paragraph shape.  We'll always have at
+  % least two.
+  \tempnum = 2
+  %
   % The first line needs space for \box0; but if \rightskip is nonzero,
   % we need only space for the part of \box0 which exceeds it:
   \dimen0=\hsize  \advance\dimen0 by -\wd0  \advance\dimen0 by \rightskip
+  %
+  % If doing a return type on its own line, we'll have another line.
+  \ifrettypeownline
+    \advance\tempnum by 1
+    \def\maybeshapeline{0in \hsize}%
+  \else
+    \def\maybeshapeline{}%
+  \fi
+  %
   % The continuations:
   \dimen2=\hsize  \advance\dimen2 by -\defargsindent
-  % (plain.tex says that \dimen1 should be used only as global.)
-  \parshape 2 0in \dimen0 \defargsindent \dimen2
   %
-  % Put the type name to the right margin.
+  % The final paragraph shape:
+  \parshape \tempnum  0in \dimen0  \maybeshapeline  \defargsindent \dimen2
+  %
+  % Put the category name at the right margin.
   \noindent
   \hbox to 0pt{%
     \hfil\box0 \kern-\hsize
@@ -6675,8 +7063,16 @@
     % . this still does not fix the ?` and !` ligatures, but so far no
     %   one has made identifiers using them :).
     \df \tt
-    \def\temp{#2}% return value type
-    \ifx\temp\empty\else \tclose{\temp} \fi
+    \def\temp{#2}% text of the return type
+    \ifx\temp\empty\else
+      \tclose{\temp}% typeset the return type
+      \ifrettypeownline
+        % put return type on its own line; prohibit line break following:
+        \hfil\vadjust{\nobreak}\break  
+      \else
+        \space  % type on same line, so just followed by a space
+      \fi
+    \fi           % no return type
     #3% output function name
   }%
   {\rm\enskip}% hskip 0.5 em of \tenrm
@@ -6696,7 +7092,10 @@
   \df \sl \hyphenchar\font=0
   %
   % On the other hand, if an argument has two dashes (for instance), we
-  % want a way to get ttsl.  Let's try @var for that.
+  % want a way to get ttsl.  We used to recommend @var for that, so
+  % leave the code in, but it's strange for @var to lead to typewriter.
+  % Nowadays we recommend @code, since the difference between a ttsl hyphen
+  % and a tt hyphen is pretty tiny.  @code also disables ?` !`.
   \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
   #1%
   \sl\hyphenchar\font=45
@@ -6794,7 +7193,7 @@
 
 % To do this right we need a feature of e-TeX, \scantokens,
 % which we arrange to emulate with a temporary file in ordinary TeX.
-\ifx\eTeXversion\undefined
+\ifx\eTeXversion\thisisundefined
   \newwrite\macscribble
   \def\scantokens#1{%
     \toks0={#1}%
@@ -6805,25 +7204,30 @@
   }
 \fi
 
-\def\scanmacro#1{%
-  \begingroup
-    \newlinechar`\^^M
-    \let\xeatspaces\eatspaces
-    % Undo catcode changes of \startcontents and \doprintindex
-    % When called from @insertcopying or (short)caption, we need active
-    % backslash to get it printed correctly.  Previously, we had
-    % \catcode`\\=\other instead.  We'll see whether a problem appears
-    % with macro expansion.				--kasal, 19aug04
-    \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
-    % ... and \example
-    \spaceisspace
-    %
-    % Append \endinput to make sure that TeX does not see the ending newline.
-    % I've verified that it is necessary both for e-TeX and for ordinary TeX
-    %							--kasal, 29nov03
-    \scantokens{#1\endinput}%
-  \endgroup
-}
+\def\scanmacro#1{\begingroup
+  \newlinechar`\^^M
+  \let\xeatspaces\eatspaces
+  %
+  % Undo catcode changes of \startcontents and \doprintindex
+  % When called from @insertcopying or (short)caption, we need active
+  % backslash to get it printed correctly.  Previously, we had
+  % \catcode`\\=\other instead.  We'll see whether a problem appears
+  % with macro expansion.				--kasal, 19aug04
+  \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
+  %
+  % ... and for \example:
+  \spaceisspace
+  %
+  % The \empty here causes a following catcode 5 newline to be eaten as
+  % part of reading whitespace after a control sequence.  It does not
+  % eat a catcode 13 newline.  There's no good way to handle the two
+  % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX
+  % would then have different behavior).  See the Macro Details node in
+  % the manual for the workaround we recommend for macros and
+  % line-oriented commands.
+  % 
+  \scantokens{#1\empty}%
+\endgroup}
 
 \def\scanexp#1{%
   \edef\temp{\noexpand\scanmacro{#1}}%
@@ -6877,17 +7281,18 @@
 
 % Macro bodies are absorbed as an argument in a context where
 % all characters are catcode 10, 11 or 12, except \ which is active
-% (as in normal texinfo). It is necessary to change the definition of \.
-
+% (as in normal texinfo). It is necessary to change the definition of \
+% to recognize macro arguments; this is the job of \mbodybackslash.
+%
 % Non-ASCII encodings make 8-bit characters active, so un-activate
 % them to avoid their expansion.  Must do this non-globally, to
 % confine the change to the current group.
-
+%
 % It's necessary to have hard CRs when the macro is executed. This is
-% done by  making ^^M (\endlinechar) catcode 12 when reading the macro
+% done by making ^^M (\endlinechar) catcode 12 when reading the macro
 % body, and then making it the \newlinechar in \scanmacro.
-
-\def\scanctxt{%
+%
+\def\scanctxt{% used as subroutine
   \catcode`\"=\other
   \catcode`\+=\other
   \catcode`\<=\other
@@ -6900,13 +7305,13 @@
   \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi
 }
 
-\def\scanargctxt{%
+\def\scanargctxt{% used for copying and captions, not macros.
   \scanctxt
   \catcode`\\=\other
   \catcode`\^^M=\other
 }
 
-\def\macrobodyctxt{%
+\def\macrobodyctxt{% used for @macro definitions
   \scanctxt
   \catcode`\{=\other
   \catcode`\}=\other
@@ -6914,32 +7319,56 @@
   \usembodybackslash
 }
 
-\def\macroargctxt{%
+\def\macroargctxt{% used when scanning invocations
   \scanctxt
-  \catcode`\\=\other
+  \catcode`\\=0
 }
+% why catcode 0 for \ in the above?  To recognize \\ \{ \} as "escapes"
+% for the single characters \ { }.  Thus, we end up with the "commands"
+% that would be written @\ @{ @} in a Texinfo document.
+% 
+% We already have @{ and @}.  For @\, we define it here, and only for
+% this purpose, to produce a typewriter backslash (so, the @\ that we
+% define for @math can't be used with @macro calls):
+%
+\def\\{\normalbackslash}%
+% 
+% We would like to do this for \, too, since that is what makeinfo does.
+% But it is not possible, because Texinfo already has a command @, for a
+% cedilla accent.  Documents must use @comma{} instead.
+%
+% \anythingelse will almost certainly be an error of some kind.
+
 
 % \mbodybackslash is the definition of \ in @macro bodies.
 % It maps \foo\ => \csname macarg.foo\endcsname => #N
 % where N is the macro parameter number.
 % We define \csname macarg.\endcsname to be \realbackslash, so
 % \\ in macro replacement text gets you a backslash.
-
+%
 {\catcode`@=0 @catcode`@\=@active
  @gdef@usembodybackslash{@let\=@mbodybackslash}
  @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
 }
 \expandafter\def\csname macarg.\endcsname{\realbackslash}
 
+\def\margbackslash#1{\char`\#1 }
+
 \def\macro{\recursivefalse\parsearg\macroxxx}
 \def\rmacro{\recursivetrue\parsearg\macroxxx}
 
 \def\macroxxx#1{%
-  \getargs{#1}%           now \macname is the macname and \argl the arglist
+  \getargs{#1}% now \macname is the macname and \argl the arglist
   \ifx\argl\empty       % no arguments
-     \paramno=0%
+     \paramno=0\relax
   \else
      \expandafter\parsemargdef \argl;%
+     \if\paramno>256\relax
+       \ifx\eTeXversion\thisisundefined
+         \errhelp = \EMsimple
+         \errmessage{You need eTeX to compile a file with macros with more than 256 arguments}
+       \fi
+     \fi
   \fi
   \if1\csname ismacro.\the\macname\endcsname
      \message{Warning: redefining \the\macname}%
@@ -6986,46 +7415,269 @@
 % an opening brace, and that opening brace is not consumed.
 \def\getargs#1{\getargsxxx#1{}}
 \def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
-\def\getmacname #1 #2\relax{\macname={#1}}
+\def\getmacname#1 #2\relax{\macname={#1}}
 \def\getmacargs#1{\def\argl{#1}}
 
-% Parse the optional {params} list.  Set up \paramno and \paramlist
-% so \defmacro knows what to do.  Define \macarg.blah for each blah
-% in the params list, to be ##N where N is the position in that list.
-% That gets used by \mbodybackslash (above).
+% For macro processing make @ a letter so that we can make Texinfo private macro names.
+\edef\texiatcatcode{\the\catcode`\@}
+\catcode `@=11\relax
 
+% Parse the optional {params} list.  Set up \paramno and \paramlist
+% so \defmacro knows what to do.  Define \macarg.BLAH for each BLAH
+% in the params list to some hook where the argument si to be expanded.  If
+% there are less than 10 arguments that hook is to be replaced by ##N where N
+% is the position in that list, that is to say the macro arguments are to be
+% defined `a la TeX in the macro body.  
+%
+% That gets used by \mbodybackslash (above).
+%
 % We need to get `macro parameter char #' into several definitions.
-% The technique used is stolen from LaTeX:  let \hash be something
+% The technique used is stolen from LaTeX: let \hash be something
 % unexpandable, insert that wherever you need a #, and then redefine
 % it to # just before using the token list produced.
 %
 % The same technique is used to protect \eatspaces till just before
 % the macro is used.
-
-\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
-        \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
+%
+% If there are 10 or more arguments, a different technique is used, where the
+% hook remains in the body, and when macro is to be expanded the body is
+% processed again to replace the arguments.
+%
+% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the
+% argument N value and then \edef  the body (nothing else will expand because of
+% the catcode regime underwhich the body was input).
+%
+% If you compile with TeX (not eTeX), and you have macros with 10 or more
+% arguments, you need that no macro has more than 256 arguments, otherwise an
+% error is produced.
+\def\parsemargdef#1;{%
+  \paramno=0\def\paramlist{}%
+  \let\hash\relax
+  \let\xeatspaces\relax
+  \parsemargdefxxx#1,;,%
+  % In case that there are 10 or more arguments we parse again the arguments
+  % list to set new definitions for the \macarg.BLAH macros corresponding to
+  % each BLAH argument. It was anyhow needed to parse already once this list
+  % in order to count the arguments, and as macros with at most 9 arguments
+  % are by far more frequent than macro with 10 or more arguments, defining
+  % twice the \macarg.BLAH macros does not cost too much processing power.
+  \ifnum\paramno<10\relax\else
+    \paramno0\relax
+    \parsemmanyargdef@@#1,;,% 10 or more arguments
+  \fi
+}
 \def\parsemargdefxxx#1,{%
   \if#1;\let\next=\relax
   \else \let\next=\parsemargdefxxx
-    \advance\paramno by 1%
+    \advance\paramno by 1
     \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
         {\xeatspaces{\hash\the\paramno}}%
     \edef\paramlist{\paramlist\hash\the\paramno,}%
   \fi\next}
 
+\def\parsemmanyargdef@@#1,{%
+  \if#1;\let\next=\relax
+  \else 
+    \let\next=\parsemmanyargdef@@
+    \edef\tempb{\eatspaces{#1}}%
+    \expandafter\def\expandafter\tempa
+       \expandafter{\csname macarg.\tempb\endcsname}%
+    % Note that we need some extra \noexpand\noexpand, this is because we
+    % don't want \the  to be expanded in the \parsermacbody  as it uses an
+    % \xdef .
+    \expandafter\edef\tempa
+      {\noexpand\noexpand\noexpand\the\toks\the\paramno}%
+    \advance\paramno by 1\relax
+  \fi\next}
+
 % These two commands read recursive and nonrecursive macro bodies.
 % (They're different since rec and nonrec macros end differently.)
+%
 
+\catcode `\@\texiatcatcode
 \long\def\parsemacbody#1@end macro%
 {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
 \long\def\parsermacbody#1@end rmacro%
 {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\catcode `\@=11\relax
 
-% This defines the macro itself. There are six cases: recursive and
-% nonrecursive macros of zero, one, and many arguments.
+\let\endargs@\relax
+\let\nil@\relax
+\def\nilm@{\nil@}%
+\long\def\nillm@{\nil@}%
+
+% This macro is expanded during the Texinfo macro expansion, not during its
+% definition.  It gets all the arguments values and assigns them to macros
+% macarg.ARGNAME
+%
+% #1 is the macro name
+% #2 is the list of argument names
+% #3 is the list of argument values
+\def\getargvals@#1#2#3{%
+  \def\macargdeflist@{}%
+  \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion.
+  \def\paramlist{#2,\nil@}%
+  \def\macroname{#1}%
+  \begingroup
+  \macroargctxt
+  \def\argvaluelist{#3,\nil@}%
+  \def\@tempa{#3}%
+  \ifx\@tempa\empty
+    \setemptyargvalues@
+  \else
+    \getargvals@@
+  \fi
+}
+
+% 
+\def\getargvals@@{%
+  \ifx\paramlist\nilm@
+      % Some sanity check needed here that \argvaluelist is also empty.
+      \ifx\argvaluelist\nillm@
+      \else
+        \errhelp = \EMsimple
+        \errmessage{Too many arguments in macro `\macroname'!}%
+      \fi
+      \let\next\macargexpandinbody@
+  \else
+    \ifx\argvaluelist\nillm@
+       % No more arguments values passed to macro.  Set remaining named-arg
+       % macros to empty.
+       \let\next\setemptyargvalues@
+    \else
+      % pop current arg name into \@tempb
+      \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\paramlist}%
+       % pop current argument value into \@tempc
+      \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\argvaluelist}%
+       % Here \@tempb is the current arg name and \@tempc is the current arg value.
+       % First place the new argument macro definition into \@tempd
+       \expandafter\macname\expandafter{\@tempc}%
+       \expandafter\let\csname macarg.\@tempb\endcsname\relax
+       \expandafter\def\expandafter\@tempe\expandafter{%
+         \csname macarg.\@tempb\endcsname}%
+       \edef\@tempd{\long\def\@tempe{\the\macname}}%
+       \push@\@tempd\macargdeflist@
+       \let\next\getargvals@@
+    \fi
+  \fi
+  \next
+}
+
+\def\push@#1#2{%
+  \expandafter\expandafter\expandafter\def
+  \expandafter\expandafter\expandafter#2%
+  \expandafter\expandafter\expandafter{%
+  \expandafter#1#2}%
+}
+
+% Replace arguments by their values in the macro body, and place the result
+% in macro \@tempa
+\def\macvalstoargs@{%
+  %  To do this we use the property that token registers that are \the'ed
+  % within an \edef  expand only once. So we are going to place all argument
+  % values into respective token registers.
+  %
+  % First we save the token context, and initialize argument numbering.
+  \begingroup
+    \paramno0\relax
+    % Then, for each argument number #N, we place the corresponding argument
+    % value into a new token list register \toks#N
+    \expandafter\putargsintokens@\saveparamlist@,;,%
+    % Then, we expand the body so that argument are replaced by their
+    % values. The trick for values not to be expanded themselves is that they
+    % are within tokens and that tokens expand only once in an \edef .
+    \edef\@tempc{\csname mac.\macroname .body\endcsname}%
+    % Now we restore the token stack pointer to free the token list registers
+    % which we have used, but we make sure that expanded body is saved after
+    % group.
+    \expandafter
+  \endgroup
+  \expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
+  }
+
+\def\macargexpandinbody@{% 
+  %% Define the named-macro outside of this group and then close this group. 
+  \expandafter
+  \endgroup
+  \macargdeflist@
+  % First the replace in body the macro arguments by their values, the result
+  % is in \@tempa .
+  \macvalstoargs@
+  % Then we point at the \norecurse or \gobble (for recursive) macro value
+  % with \@tempb .
+  \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname
+  % Depending on whether it is recursive or not, we need some tailing
+  % \egroup .
+  \ifx\@tempb\gobble
+     \let\@tempc\relax
+  \else
+     \let\@tempc\egroup
+  \fi
+  % And now we do the real job:
+  \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}%
+  \@tempd
+}
+
+\def\putargsintokens@#1,{%
+  \if#1;\let\next\relax
+  \else
+    \let\next\putargsintokens@
+    % First we allocate the new token list register, and give it a temporary
+    % alias \@tempb .
+    \toksdef\@tempb\the\paramno
+    % Then we place the argument value into that token list register.
+    \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname
+    \expandafter\@tempb\expandafter{\@tempa}%
+    \advance\paramno by 1\relax
+  \fi
+  \next
+}
+
+% Save the token stack pointer into macro #1
+\def\texisavetoksstackpoint#1{\edef#1{\the\@cclvi}}
+% Restore the token stack pointer from number in macro #1
+\def\texirestoretoksstackpoint#1{\expandafter\mathchardef\expandafter\@cclvi#1\relax}
+% newtoks that can be used non \outer .
+\def\texinonouternewtoks{\alloc@ 5\toks \toksdef \@cclvi}
+
+% Tailing missing arguments are set to empty
+\def\setemptyargvalues@{%
+  \ifx\paramlist\nilm@
+    \let\next\macargexpandinbody@
+  \else
+    \expandafter\setemptyargvaluesparser@\paramlist\endargs@
+    \let\next\setemptyargvalues@
+  \fi
+  \next
+}
+
+\def\setemptyargvaluesparser@#1,#2\endargs@{%
+  \expandafter\def\expandafter\@tempa\expandafter{%
+    \expandafter\def\csname macarg.#1\endcsname{}}%
+  \push@\@tempa\macargdeflist@
+  \def\paramlist{#2}%
+}
+
+% #1 is the element target macro
+% #2 is the list macro
+% #3,#4\endargs@ is the list value
+\def\pop@#1#2#3,#4\endargs@{%
+   \def#1{#3}%
+   \def#2{#4}%
+}
+\long\def\longpop@#1#2#3,#4\endargs@{%
+   \long\def#1{#3}%
+   \long\def#2{#4}%
+}
+
+% This defines a Texinfo @macro. There are eight cases: recursive and
+% nonrecursive macros of zero, one, up to nine, and many arguments.
 % Much magic with \expandafter here.
 % \xdef is used so that macro definitions will survive the file
 % they're defined in; @include reads the file inside a group.
+%
 \def\defmacro{%
   \let\hash=##% convert placeholders to macro parameter chars
   \ifrecursive
@@ -7040,17 +7692,25 @@
          \expandafter\noexpand\csname\the\macname xxx\endcsname}%
       \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
          \egroup\noexpand\scanmacro{\temp}}%
-    \else % many
-      \expandafter\xdef\csname\the\macname\endcsname{%
-         \bgroup\noexpand\macroargctxt
-         \noexpand\csname\the\macname xx\endcsname}%
-      \expandafter\xdef\csname\the\macname xx\endcsname##1{%
-          \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
-      \expandafter\expandafter
-      \expandafter\xdef
-      \expandafter\expandafter
-        \csname\the\macname xxx\endcsname
-          \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+    \else
+      \ifnum\paramno<10\relax % at most 9
+        \expandafter\xdef\csname\the\macname\endcsname{%
+           \bgroup\noexpand\macroargctxt
+           \noexpand\csname\the\macname xx\endcsname}%
+        \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+            \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+        \expandafter\expandafter
+        \expandafter\xdef
+        \expandafter\expandafter
+          \csname\the\macname xxx\endcsname
+            \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+      \else % 10 or more
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \noexpand\getargvals@{\the\macname}{\argl}%
+        }%    
+        \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+        \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble
+      \fi
     \fi
   \else
     \ifcase\paramno
@@ -7067,29 +7727,40 @@
         \egroup
         \noexpand\norecurse{\the\macname}%
         \noexpand\scanmacro{\temp}\egroup}%
-    \else % many
-      \expandafter\xdef\csname\the\macname\endcsname{%
-         \bgroup\noexpand\macroargctxt
-         \expandafter\noexpand\csname\the\macname xx\endcsname}%
-      \expandafter\xdef\csname\the\macname xx\endcsname##1{%
-          \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
-      \expandafter\expandafter
-      \expandafter\xdef
-      \expandafter\expandafter
-      \csname\the\macname xxx\endcsname
-      \paramlist{%
-          \egroup
-          \noexpand\norecurse{\the\macname}%
-          \noexpand\scanmacro{\temp}\egroup}%
+    \else % at most 9
+      \ifnum\paramno<10\relax
+        \expandafter\xdef\csname\the\macname\endcsname{%
+           \bgroup\noexpand\macroargctxt
+           \expandafter\noexpand\csname\the\macname xx\endcsname}%
+        \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+            \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+        \expandafter\expandafter
+        \expandafter\xdef
+        \expandafter\expandafter
+        \csname\the\macname xxx\endcsname
+        \paramlist{%
+            \egroup
+            \noexpand\norecurse{\the\macname}%
+            \noexpand\scanmacro{\temp}\egroup}%
+      \else % 10 or more:
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \noexpand\getargvals@{\the\macname}{\argl}%
+        }%
+        \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+        \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse
+      \fi
     \fi
   \fi}
 
+\catcode `\@\texiatcatcode\relax
+
 \def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
 
 % \braceorline decides whether the next nonwhitespace character is a
 % {.  If so it reads up to the closing }, if not, it reads the whole
 % line.  Whatever was read is then fed to the next control sequence
-% as an argument (by \parsebrace or \parsearg)
+% as an argument (by \parsebrace or \parsearg).
+% 
 \def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
 \def\braceorlinexxx{%
   \ifx\nchar\bgroup\else
@@ -7099,7 +7770,8 @@
 
 % @alias.
 % We need some trickery to remove the optional spaces around the equal
-% sign.  Just make them active and then expand them all to nothing.
+% sign.  Make them active and then expand them all to nothing.
+%
 \def\alias{\parseargusing\obeyspaces\aliasxxx}
 \def\aliasxxx #1{\aliasyyy#1\relax}
 \def\aliasyyy #1=#2\relax{%
@@ -7120,7 +7792,8 @@
 
 % @inforef is relatively simple.
 \def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+\def\inforefzzz #1,#2,#3,#4**{%
+  \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
   node \samp{\ignorespaces#1{}}}
 
 % @node's only job in TeX is to define \lastnode, which is used in
@@ -7181,11 +7854,32 @@
       \toks0 = \expandafter{\lastsection}%
       \immediate \writexrdef{title}{\the\toks0 }%
       \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
-      \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, during \shipout
+      \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout
     }%
   \fi
 }
 
+% @xrefautosectiontitle on|off says whether @section(ing) names are used
+% automatically in xrefs, if the third arg is not explicitly specified.
+% This was provided as a "secret" @set xref-automatic-section-title
+% variable, now it's official.
+% 
+\parseargdef\xrefautomaticsectiontitle{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @xrefautomaticsectiontitle value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% 
 % @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
 % the node name, #2 the name of the Info cross-reference, #3 the printed
 % node name, #4 the name of the Info file, #5 the name of the printed
@@ -7194,26 +7888,41 @@
 \def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
 \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
 \def\ref#1{\xrefX[#1,,,,,,,]}
+%
+\newbox\toprefbox
+\newbox\printedrefnamebox
+\newbox\infofilenamebox
+\newbox\printedmanualbox
+%
 \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
   \unsepspaces
-  \def\printedmanual{\ignorespaces #5}%
+  %
+  % Get args without leading/trailing spaces.
   \def\printedrefname{\ignorespaces #3}%
-  \setbox1=\hbox{\printedmanual\unskip}%
-  \setbox0=\hbox{\printedrefname\unskip}%
-  \ifdim \wd0 = 0pt
+  \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
+  %
+  \def\infofilename{\ignorespaces #4}%
+  \setbox\infofilenamebox = \hbox{\infofilename\unskip}%
+  %
+  \def\printedmanual{\ignorespaces #5}%
+  \setbox\printedmanualbox  = \hbox{\printedmanual\unskip}%
+  %
+  % If the printed reference name (arg #3) was not explicitly given in
+  % the @xref, figure out what we want to use.
+  \ifdim \wd\printedrefnamebox = 0pt
     % No printed node name was explicitly given.
-    \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
-      % Use the node name inside the square brackets.
+    \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
+      % Not auto section-title: use node name inside the square brackets.
       \def\printedrefname{\ignorespaces #1}%
     \else
-      % Use the actual chapter/section title appear inside
-      % the square brackets.  Use the real section title if we have it.
-      \ifdim \wd1 > 0pt
-        % It is in another manual, so we don't have it.
+      % Auto section-title: use chapter/section title inside
+      % the square brackets if we have it.
+      \ifdim \wd\printedmanualbox > 0pt
+        % It is in another manual, so we don't have it; use node name.
         \def\printedrefname{\ignorespaces #1}%
       \else
         \ifhavexrefs
-          % We know the real title if we have the xref values.
+          % We (should) know the real title if we have the xref values.
           \def\printedrefname{\refx{#1-title}{}}%
         \else
           % Otherwise just copy the Info node name.
@@ -7227,13 +7936,20 @@
   \ifpdf
     {\indexnofonts
      \turnoffactive
+     \makevalueexpandable
      % This expands tokens, so do it after making catcode changes, so _
-     % etc. don't get their TeX definitions.
+     % etc. don't get their TeX definitions.  This ignores all spaces in
+     % #4, including (wrongly) those in the middle of the filename.
      \getfilename{#4}%
      %
-     % See comments at \activebackslashdouble.
-     {\activebackslashdouble \xdef\pdfxrefdest{#1}%
-      \backslashparens\pdfxrefdest}%
+     % This (wrongly) does not take account of leading or trailing
+     % spaces in #1, which should be ignored.
+     \edef\pdfxrefdest{#1}%
+     \ifx\pdfxrefdest\empty
+       \def\pdfxrefdest{Top}% no empty targets
+     \else
+       \txiescapepdf\pdfxrefdest  % escape PDF special chars
+     \fi
      %
      \leavevmode
      \startlink attr{/Border [0 0 0]}%
@@ -7260,29 +7976,42 @@
   \iffloat\Xthisreftitle
     % If the user specified the print name (third arg) to the ref,
     % print it instead of our usual "Figure 1.2".
-    \ifdim\wd0 = 0pt
+    \ifdim\wd\printedrefnamebox = 0pt
       \refx{#1-snt}{}%
     \else
       \printedrefname
     \fi
     %
-    % if the user also gave the printed manual name (fifth arg), append
+    % If the user also gave the printed manual name (fifth arg), append
     % "in MANUALNAME".
-    \ifdim \wd1 > 0pt
+    \ifdim \wd\printedmanualbox > 0pt
       \space \putwordin{} \cite{\printedmanual}%
     \fi
   \else
     % node/anchor (non-float) references.
+    % 
+    % If we use \unhbox to print the node names, TeX does not insert
+    % empty discretionaries after hyphens, which means that it will not
+    % find a line break at a hyphen in a node names.  Since some manuals
+    % are best written with fairly long node names, containing hyphens,
+    % this is a loss.  Therefore, we give the text of the node name
+    % again, so it is as if TeX is seeing it for the first time.
+    % 
+    \ifdim \wd\printedmanualbox > 0pt
+      % Cross-manual reference with a printed manual name.
+      % 
+      \crossmanualxref{\cite{\printedmanual\unskip}}%
     %
-    % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
-    % insert empty discretionaries after hyphens, which means that it will
-    % not find a line break at a hyphen in a node names.  Since some manuals
-    % are best written with fairly long node names, containing hyphens, this
-    % is a loss.  Therefore, we give the text of the node name again, so it
-    % is as if TeX is seeing it for the first time.
-    \ifdim \wd1 > 0pt
-      \putwordSection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
+    \else\ifdim \wd\infofilenamebox > 0pt
+      % Cross-manual reference with only an info filename (arg 4), no
+      % printed manual name (arg 5).  This is essentially the same as
+      % the case above; we output the filename, since we have nothing else.
+      % 
+      \crossmanualxref{\code{\infofilename\unskip}}%
+    %
     \else
+      % Reference within this manual.
+      %
       % _ (for example) has to be the character _ for the purposes of the
       % control sequence corresponding to the node, but it has to expand
       % into the usual \leavevmode...\vrule stuff for purposes of
@@ -7294,7 +8023,7 @@
        \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
        \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
       }%
-      % output the `[mynode]' via a macro so it can be overridden.
+      % output the `[mynode]' via the macro below so it can be overridden.
       \xrefprintnodename\printedrefname
       %
       % But we always want a comma and a space:
@@ -7302,11 +8031,37 @@
       %
       % output the `page 3'.
       \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
-    \fi
+    \fi\fi
   \fi
   \endlink
 \endgroup}
 
+% Output a cross-manual xref to #1.  Used just above (twice).
+% 
+% Only include the text "Section ``foo'' in" if the foo is neither
+% missing or Top.  Thus, @xref{,,,foo,The Foo Manual} outputs simply
+% "see The Foo Manual", the idea being to refer to the whole manual.
+% 
+% But, this being TeX, we can't easily compare our node name against the
+% string "Top" while ignoring the possible spaces before and after in
+% the input.  By adding the arbitrary 7sp below, we make it much less
+% likely that a real node name would have the same width as "Top" (e.g.,
+% in a monospaced font).  Hopefully it will never happen in practice.
+% 
+% For the same basic reason, we retypeset the "Top" at every
+% reference, since the current font is indeterminate.
+% 
+\def\crossmanualxref#1{%
+  \setbox\toprefbox = \hbox{Top\kern7sp}%
+  \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
+  \ifdim \wd2 > 7sp  % nonempty?
+    \ifdim \wd2 = \wd\toprefbox \else  % same as Top?
+      \putwordSection{} ``\printedrefname'' \putwordin{}\space
+    \fi
+  \fi
+  #1%
+}
+
 % This macro is called from \xrefX for the `[nodename]' part of xref
 % output.  It's a separate macro only so it can be changed more easily,
 % since square brackets don't work well in some documents.  Particularly
@@ -7357,7 +8112,8 @@
     \angleleft un\-de\-fined\angleright
     \iflinks
       \ifhavexrefs
-        \message{\linenumber Undefined cross reference `#1'.}%
+        {\toks0 = {#1}% avoid expansion of possibly-complex value
+         \message{\linenumber Undefined cross reference `\the\toks0'.}}%
       \else
         \ifwarnedxrefs\else
           \global\warnedxrefstrue
@@ -7521,7 +8277,7 @@
 % space to prevent strange expansion errors.)
 \def\supereject{\par\penalty -20000\footnoteno =0 }
 
-% @footnotestyle is meaningful for info output only.
+% @footnotestyle is meaningful for Info output only.
 \let\footnotestyle=\comment
 
 {\catcode `\@=11
@@ -7584,6 +8340,8 @@
   % expands into a box, it must come within the paragraph, lest it
   % provide a place where TeX can split the footnote.
   \footstrut
+  %
+  % Invoke rest of plain TeX footnote routine.
   \futurelet\next\fo@t
 }
 }%end \catcode `\@=11
@@ -7671,7 +8429,7 @@
   it from ftp://tug.org/tex/epsf.tex.}
 %
 \def\image#1{%
-  \ifx\epsfbox\undefined
+  \ifx\epsfbox\thisisundefined
     \ifwarnednoepsf \else
       \errhelp = \noepsfhelp
       \errmessage{epsf.tex not found, images will be ignored}%
@@ -7687,7 +8445,7 @@
 % #2 is (optional) width, #3 is (optional) height.
 % #4 is (ignored optional) html alt text.
 % #5 is (ignored optional) extension.
-% #6 is just the usual extra ignored arg for parsing this stuff.
+% #6 is just the usual extra ignored arg for parsing stuff.
 \newif\ifimagevmode
 \def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
   \catcode`\^^M = 5     % in case we're inside an example
@@ -7695,6 +8453,13 @@
   % If the image is by itself, center it.
   \ifvmode
     \imagevmodetrue
+  \else \ifx\centersub\centerV
+    % for @center @image, we need a vbox so we can have our vertical space
+    \imagevmodetrue
+    \vbox\bgroup % vbox has better behavior than vtop herev
+  \fi\fi
+  %
+  \ifimagevmode
     \nobreak\medskip
     % Usually we'll have text after the image which will insert
     % \parskip glue, so insert it here too to equalize the space
@@ -7704,9 +8469,13 @@
   \fi
   %
   % Leave vertical mode so that indentation from an enclosing
-  % environment such as @quotation is respected.  On the other hand, if
-  % it's at the top level, we don't want the normal paragraph indentation.
-  \noindent
+  %  environment such as @quotation is respected.
+  % However, if we're at the top level, we don't want the
+  %  normal paragraph indentation.
+  % On the other hand, if we are in the case of @center @image, we don't
+  %  want to start a paragraph, which will create a hsize-width box and
+  %  eradicate the centering.
+  \ifx\centersub\centerV\else \noindent \fi
   %
   % Output the image.
   \ifpdf
@@ -7718,7 +8487,10 @@
     \epsfbox{#1.eps}%
   \fi
   %
-  \ifimagevmode \medskip \fi  % space after the standalone image
+  \ifimagevmode
+    \medskip  % space after a standalone image
+  \fi  
+  \ifx\centersub\centerV \egroup \fi
 \endgroup}
 
 
@@ -8136,7 +8908,7 @@
 %
 % Latin1 (ISO-8859-1) character definitions.
 \def\latonechardefs{%
-  \gdef^^a0{~}
+  \gdef^^a0{\tie}
   \gdef^^a1{\exclamdown}
   \gdef^^a2{\missingcharmsg{CENT SIGN}}
   \gdef^^a3{{\pounds}}
@@ -8166,7 +8938,7 @@
   \gdef^^b9{$^1$}
   \gdef^^ba{\ordm}
   %
-  \gdef^^bb{\guilletright}
+  \gdef^^bb{\guillemetright}
   \gdef^^bc{$1\over4$}
   \gdef^^bd{$1\over2$}
   \gdef^^be{$3\over4$}
@@ -8258,7 +9030,7 @@
 
 % Latin2 (ISO-8859-2) character definitions.
 \def\lattwochardefs{%
-  \gdef^^a0{~}
+  \gdef^^a0{\tie}
   \gdef^^a1{\ogonek{A}}
   \gdef^^a2{\u{}}
   \gdef^^a3{\L}
@@ -8339,8 +9111,8 @@
   \gdef^^ea{\ogonek{e}}
   \gdef^^eb{\"e}
   \gdef^^ec{\v e}
-  \gdef^^ed{\'\i}
-  \gdef^^ee{\^\i}
+  \gdef^^ed{\'{\dotless{i}}}
+  \gdef^^ee{\^{\dotless{i}}}
   \gdef^^ef{\v d}
   %
   \gdef^^f0{\dh}
@@ -8431,7 +9203,7 @@
 
   \gdef\DeclareUnicodeCharacter#1#2{%
     \countUTFz = "#1\relax
-    \wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}%
+    %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}%
     \begingroup
       \parseXMLCharref
       \def\UTFviiiTwoOctets##1##2{%
@@ -8899,8 +9671,8 @@
 % Prevent underfull vbox error messages.
 \vbadness = 10000
 
-% Don't be so finicky about underfull hboxes, either.
-\hbadness = 2000
+% Don't be very finicky about underfull hboxes, either.
+\hbadness = 6666
 
 % Following George Bush, get rid of widows and orphans.
 \widowpenalty=10000
@@ -9107,28 +9879,21 @@
 
 \message{and turning on texinfo input format.}
 
+\def^^L{\par} % remove \outer, so ^L can appear in an @comment
+
 % DEL is a comment character, in case @c does not suffice.
 \catcode`\^^? = 14
 
 % Define macros to output various characters with catcode for normal text.
-\catcode`\"=\other
-\catcode`\~=\other
-\catcode`\^=\other
-\catcode`\_=\other
-\catcode`\|=\other
-\catcode`\<=\other
-\catcode`\>=\other
-\catcode`\+=\other
-\catcode`\$=\other
-\def\normaldoublequote{"}
-\def\normaltilde{~}
-\def\normalcaret{^}
-\def\normalunderscore{_}
-\def\normalverticalbar{|}
-\def\normalless{<}
-\def\normalgreater{>}
-\def\normalplus{+}
-\def\normaldollar{$}%$ font-lock fix
+\catcode`\"=\other \def\normaldoublequote{"}
+\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix
+\catcode`\+=\other \def\normalplus{+}
+\catcode`\<=\other \def\normalless{<}
+\catcode`\>=\other \def\normalgreater{>}
+\catcode`\^=\other \def\normalcaret{^}
+\catcode`\_=\other \def\normalunderscore{_}
+\catcode`\|=\other \def\normalverticalbar{|}
+\catcode`\~=\other \def\normaltilde{~}
 
 % This macro is used to make a character print one way in \tt
 % (where it can probably be output as-is), and another way in other fonts,
@@ -9206,34 +9971,48 @@
 
 % In texinfo, backslash is an active character; it prints the backslash
 % in fixed width font.
-\catcode`\\=\active
-@def@normalbackslash{{@tt@backslashcurfont}}
+\catcode`\\=\active  % @ for escape char from now on.
+
+% The story here is that in math mode, the \char of \backslashcurfont
+% ends up printing the roman \ from the math symbol font (because \char
+% in math mode uses the \mathcode, and plain.tex sets
+% \mathcode`\\="026E).  It seems better for @backslashchar{} to always
+% print a typewriter backslash, hence we use an explicit \mathchar,
+% which is the decimal equivalent of "715c (class 7, e.g., use \fam;
+% ignored family value; char position "5C).  We can't use " for the
+% usual hex value because it has already been made active.
+@def@normalbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}}
+@let@backslashchar = @normalbackslash % @backslashchar{} is for user documents.
+
 % On startup, @fixbackslash assigns:
 %  @let \ = @normalbackslash
-
 % \rawbackslash defines an active \ to do \backslashcurfont.
 % \otherbackslash defines an active \ to be a literal `\' character with
-% catcode other.
+% catcode other.  We switch back and forth between these.
 @gdef@rawbackslash{@let\=@backslashcurfont}
 @gdef@otherbackslash{@let\=@realbackslash}
 
 % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'.
+% the literal character `\'.  Also revert - to its normal character, in
+% case the active - from code has slipped in.
 %
-@def@normalturnoffactive{%
-  @let\=@normalbackslash
-  @let"=@normaldoublequote
-  @let~=@normaltilde
-  @let^=@normalcaret
-  @let_=@normalunderscore
-  @let|=@normalverticalbar
-  @let<=@normalless
-  @let>=@normalgreater
-  @let+=@normalplus
-  @let$=@normaldollar %$ font-lock fix
-  @markupsetuplqdefault
-  @markupsetuprqdefault
-  @unsepspaces
+{@catcode`- = @active
+ @gdef@normalturnoffactive{%
+   @let-=@normaldash
+   @let"=@normaldoublequote
+   @let$=@normaldollar %$ font-lock fix
+   @let+=@normalplus
+   @let<=@normalless
+   @let>=@normalgreater
+   @let\=@normalbackslash
+   @let^=@normalcaret
+   @let_=@normalunderscore
+   @let|=@normalverticalbar
+   @let~=@normaltilde
+   @markupsetuplqdefault
+   @markupsetuprqdefault
+   @unsepspaces
+ }
 }
 
 % Make _ and + \other characters, temporarily.
@@ -9262,10 +10041,19 @@
 % Say @foo, not \foo, in error messages.
 @escapechar = `@@
 
+% These (along with & and #) are made active for url-breaking, so need
+% active definitions as the normal characters.
+@def@normaldot{.}
+@def@normalquest{?}
+@def@normalslash{/}
+
 % These look ok in all fonts, so just make them not special.
-@catcode`@& = @other
-@catcode`@# = @other
-@catcode`@% = @other
+% @hashchar{} gets its own user-level command, because of #line.
+@catcode`@& = @other @def@normalamp{&}
+@catcode`@# = @other @def@normalhash{#}
+@catcode`@% = @other @def@normalpercent{%}
+
+@let @hashchar = @normalhash
 
 @c Finally, make ` and ' active, so that txicodequoteundirected and
 @c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}.  If we