# Makefile.in generated by automake 1.11.1 from Makefile.am.
# Octave/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


pkgdatadir = $(datadir)/libsndfile
pkgincludedir = $(includedir)/libsndfile
pkglibdir = $(libdir)/libsndfile
pkglibexecdir = $(libexecdir)/libsndfile
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
target_triplet = x86_64-unknown-linux-gnu
subdir = Octave
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/M4/add_cflags.m4 \
	$(top_srcdir)/M4/add_cxxflags.m4 $(top_srcdir)/M4/clip_mode.m4 \
	$(top_srcdir)/M4/endian.m4 $(top_srcdir)/M4/extra_largefile.m4 \
	$(top_srcdir)/M4/extra_pkg.m4 \
	$(top_srcdir)/M4/flexible_array.m4 \
	$(top_srcdir)/M4/gcc_version.m4 $(top_srcdir)/M4/libtool.m4 \
	$(top_srcdir)/M4/lrint.m4 $(top_srcdir)/M4/lrintf.m4 \
	$(top_srcdir)/M4/ltoptions.m4 $(top_srcdir)/M4/ltsugar.m4 \
	$(top_srcdir)/M4/ltversion.m4 $(top_srcdir)/M4/lt~obsolete.m4 \
	$(top_srcdir)/M4/mkoctfile_version.m4 \
	$(top_srcdir)/M4/octave.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(octconfigdir)"
DATA = $(noinst_DATA) $(octconfig_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /home/lisional/git/sflphone-android/jni/libsndfile-1.0.25/Cfg/missing --run aclocal-1.11
ACLOCAL_AMFLAGS = -I M4
ALSA_LIBS = -lasound
AMTAR = ${SHELL} /home/lisional/git/sflphone-android/jni/libsndfile-1.0.25/Cfg/missing --run tar
AM_DEFAULT_VERBOSITY = 0
AR = ar
AUTOCONF = ${SHELL} /home/lisional/git/sflphone-android/jni/libsndfile-1.0.25/Cfg/missing --run autoconf
AUTOHEADER = ${SHELL} /home/lisional/git/sflphone-android/jni/libsndfile-1.0.25/Cfg/missing --run autoheader
AUTOMAKE = ${SHELL} /home/lisional/git/sflphone-android/jni/libsndfile-1.0.25/Cfg/missing --run automake-1.11
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -std=gnu99 -Wall -Wextra -Wdeclaration-after-statement -Wpointer-arith -funsigned-char -Wstrict-prototypes -Wmissing-prototypes -Waggregate-return -Wcast-align -Wcast-qual -Wnested-externs -Wshadow -Wbad-function-cast -Wwrite-strings -Wundef  -pipe 
CLEAN_VERSION = 1.0.25
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2 -Wall -Wextra -Wcast-align -Wcast-qual -Wshadow -Wwrite-strings -Wctor-dtor-privacy -Wnon-virtual-dtor -Woverloaded-virtual -Wreorder -Wsign-promo -Wundef 
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E

# Prevent any extension.
EXEEXT = 
EXTERNAL_CFLAGS = 
EXTERNAL_LIBS = 
FGREP = /usr/bin/grep -F
FLAC_CFLAGS = 
FLAC_LIBS = 
GCC_MAJOR_VERSION = 4
GCC_MINOR_VERSION = 7
GCC_VERSION = 4.7.2
GETCONF = 
GREP = /usr/bin/grep
HAVE_AUTOGEN = no
HAVE_MKOCTFILE = no
HAVE_OCTAVE = no
HAVE_OCTAVE_CONFIG = no
HAVE_WINE = no
HOST_TRIPLET = x86_64-unknown-linux-gnu
HTML_BGCOLOUR = black
HTML_FGCOLOUR = white
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/bin/ld -m elf_x86_64
LDFLAGS = 
LIBOBJS = 
LIBS = -lm 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBTOOL_DEPS = Cfg/ltmain.sh
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /home/lisional/git/sflphone-android/jni/libsndfile-1.0.25/Cfg/missing --run makeinfo
MANIFEST_TOOL = :
MKDIR_P = /usr/bin/mkdir -p
MKOCTFILE = 
MKOCTFILE_VERSION = 
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OCTAVE = 
OCTAVE_CONFIG = 
OCTAVE_CONFIG_VERSION = 
OCTAVE_DEST_MDIR = 
OCTAVE_DEST_ODIR = /sndfile
OCTAVE_VERSION = 
OGG_CFLAGS = 
OGG_LIBS = 
OS_SPECIFIC_CFLAGS = 
OS_SPECIFIC_LINKS = 
OTOOL = 
OTOOL64 = 
PACKAGE = libsndfile
PACKAGE_BUGREPORT = sndfile@mega-nerd.com
PACKAGE_NAME = libsndfile
PACKAGE_STRING = libsndfile 1.0.25
PACKAGE_TARNAME = libsndfile
PACKAGE_URL = http://www.mega-nerd.com/libsndfile/
PACKAGE_VERSION = 1.0.25
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
PKG_CONFIG_LIBDIR = 
PKG_CONFIG_PATH = 
RANLIB = ranlib
RC = 
SED = /usr/bin/sed
SET_MAKE = 
SF_COUNT_MAX = 0x7FFFFFFFFFFFFFFFLL
SHARED_VERSION_INFO = 1:25:0
SHELL = /bin/sh
SHLIB_VERSION_ARG = -Wl,--version-script=$(srcdir)/Symbols.gnu-binutils
SIZEOF_SF_COUNT_T = 8
SNDIO_LIBS = 
SPEEX_CFLAGS = 
SPEEX_LIBS = 
SQLITE3_CFLAGS =  
SQLITE3_LIBS = -lsqlite3  
STRIP = strip
TYPEOF_SF_COUNT_T = int64_t
VERSION = 1.0.25
VORBISENC_CFLAGS = 
VORBISENC_LIBS = 
VORBIS_CFLAGS = 
VORBIS_LIBS = 
WIN_RC_VERSION = 1,0,25
abs_builddir = /home/lisional/git/sflphone-android/jni/libsndfile-1.0.25/Octave
abs_srcdir = /home/lisional/git/sflphone-android/jni/libsndfile-1.0.25/Octave
abs_top_builddir = /home/lisional/git/sflphone-android/jni/libsndfile-1.0.25
abs_top_srcdir = /home/lisional/git/sflphone-android/jni/libsndfile-1.0.25
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
htmldocdir = /usr/local/share/doc/libsndfile1-dev/html
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/lisional/git/sflphone-android/jni/libsndfile-1.0.25/Cfg/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /usr/bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target = x86_64-unknown-linux-gnu
target_alias = 
target_cpu = x86_64
target_os = linux-gnu
target_vendor = unknown
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
CXXLD = $(CXX)
CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \
	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@

EXTRA_DIST = sndfile_load.m sndfile_save.m sndfile_play.m \
	octave_test.m octave_test.sh $(oct_module_srcs) PKG_ADD

octconfigdir = $(exec_prefix)/share/octave/site/m
octconfig_DATA = sndfile_load.m sndfile_save.m sndfile_play.m
OCT_CXXFLAGS = @OCT_CXXFLAGS@
OCT_LIB_DIR = @OCT_LIB_DIR@
OCT_LIBS = @OCT_LIBS@
SNDFILEDIR = $(top_builddir)/src
INCLUDES = -I$(SNDFILEDIR)
oct_module_srcs = sndfile.cc
oct_module_files = sndfile.oct PKG_ADD

# Make these noinst so they can be installed manually.
noinst_DATA = $(oct_module_files)

# Used by shave which cleans up automake generated Makefile output.
V = @
Q = $(V:1=)
QUIET_GEN = $(Q:@=@echo '  GEN   '$@;)
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Octave/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu Octave/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-octconfigDATA: $(octconfig_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(octconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(octconfigdir)"
	@list='$(octconfig_DATA)'; test -n "$(octconfigdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(octconfigdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(octconfigdir)" || exit $$?; \
	done

uninstall-octconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(octconfig_DATA)'; test -n "$(octconfigdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(octconfigdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(octconfigdir)" && rm -f $$files
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(octconfigdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-octconfigDATA

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am: install-exec-local

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-local uninstall-octconfigDATA

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	clean-local distclean distclean-generic distclean-libtool \
	distdir dvi dvi-am html html-am info info-am install \
	install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-exec-local \
	install-html install-html-am install-info install-info-am \
	install-man install-octconfigDATA install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-local uninstall-octconfigDATA


# Use Octave's mkoctfile to do all the heavy lifting. Unfortunately, its
# a little dumb so we need to guide it carefully.
sndfile.oct : sndfile.o
	$(QUIET_GEN) $(MKOCTFILE) -v $(INCLUDES) $(top_builddir)/Octave/$+ -L$(SNDFILEDIR)/.libs -L$(SNDFILEDIR) -lsndfile -o $(top_builddir)/Octave/$@ > /dev/null

sndfile.o : sndfile.cc
	$(QUIET_GEN) $(MKOCTFILE) -v $(INCLUDES) -c $+ -o $(top_builddir)/Octave/$@ > /dev/null

# Allow for the test being run in the build dir, but the test script
# being located in the source dir.
check :
	octave_src_dir=$(srcdir) $(srcdir)/octave_test.sh

# Since the octave modules are installed in a special location, a custom install
# and uninstall routine must be specified.
install-exec-local : $(oct_module_files)
	@$(NORMAL_INSTALL)
	test -z "$(OCTAVE_DEST_ODIR)" || $(mkdir_p) "$(DESTDIR)$(OCTAVE_DEST_ODIR)"
	@list='$(oct_module_files)'; for p in $$list; do \
	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  if test -f $$p \
	     || test -f $$p1 \
	  ; then \
	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL) '$$p' '$(DESTDIR)$(OCTAVE_DEST_ODIR)/$$f'"; \
	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL) "$$p" "$(DESTDIR)$(OCTAVE_DEST_ODIR)/$$f" || exit 1; \
	  else :; fi; \
	done

uninstall-local :
	@$(NORMAL_UNINSTALL)
	@list='$(oct_module_files)'; for p in $$list; do \
	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
	  echo " rm -f '$(DESTDIR)$(OCTAVE_DEST_ODIR)/$$f'"; \
	  rm -f "$(DESTDIR)$(OCTAVE_DEST_ODIR)/$$f"; \
	done

clean-local :
	rm -f sndfile.o sndfile.oct

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: