* #30460: added opus dep
diff --git a/jni/libopus/celt/_kiss_fft_guts.h b/jni/libopus/celt/_kiss_fft_guts.h
new file mode 100644
index 0000000..33e62c6
--- /dev/null
+++ b/jni/libopus/celt/_kiss_fft_guts.h
@@ -0,0 +1,175 @@
+/*Copyright (c) 2003-2004, Mark Borgerding
+
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.*/
+
+#ifndef KISS_FFT_GUTS_H
+#define KISS_FFT_GUTS_H
+
+#define MIN(a,b) ((a)<(b) ? (a):(b))
+#define MAX(a,b) ((a)>(b) ? (a):(b))
+
+/* kiss_fft.h
+ defines kiss_fft_scalar as either short or a float type
+ and defines
+ typedef struct { kiss_fft_scalar r; kiss_fft_scalar i; }kiss_fft_cpx; */
+#include "kiss_fft.h"
+
+/*
+ Explanation of macros dealing with complex math:
+
+ C_MUL(m,a,b) : m = a*b
+ C_FIXDIV( c , div ) : if a fixed point impl., c /= div. noop otherwise
+ C_SUB( res, a,b) : res = a - b
+ C_SUBFROM( res , a) : res -= a
+ C_ADDTO( res , a) : res += a
+ * */
+#ifdef FIXED_POINT
+#include "arch.h"
+
+
+#define SAMP_MAX 2147483647
+#define TWID_MAX 32767
+#define TRIG_UPSCALE 1
+
+#define SAMP_MIN -SAMP_MAX
+
+
+# define S_MUL(a,b) MULT16_32_Q15(b, a)
+
+# define C_MUL(m,a,b) \
+ do{ (m).r = SUB32(S_MUL((a).r,(b).r) , S_MUL((a).i,(b).i)); \
+ (m).i = ADD32(S_MUL((a).r,(b).i) , S_MUL((a).i,(b).r)); }while(0)
+
+# define C_MULC(m,a,b) \
+ do{ (m).r = ADD32(S_MUL((a).r,(b).r) , S_MUL((a).i,(b).i)); \
+ (m).i = SUB32(S_MUL((a).i,(b).r) , S_MUL((a).r,(b).i)); }while(0)
+
+# define C_MUL4(m,a,b) \
+ do{ (m).r = SHR32(SUB32(S_MUL((a).r,(b).r) , S_MUL((a).i,(b).i)),2); \
+ (m).i = SHR32(ADD32(S_MUL((a).r,(b).i) , S_MUL((a).i,(b).r)),2); }while(0)
+
+# define C_MULBYSCALAR( c, s ) \
+ do{ (c).r = S_MUL( (c).r , s ) ;\
+ (c).i = S_MUL( (c).i , s ) ; }while(0)
+
+# define DIVSCALAR(x,k) \
+ (x) = S_MUL( x, (TWID_MAX-((k)>>1))/(k)+1 )
+
+# define C_FIXDIV(c,div) \
+ do { DIVSCALAR( (c).r , div); \
+ DIVSCALAR( (c).i , div); }while (0)
+
+#define C_ADD( res, a,b)\
+ do {(res).r=ADD32((a).r,(b).r); (res).i=ADD32((a).i,(b).i); \
+ }while(0)
+#define C_SUB( res, a,b)\
+ do {(res).r=SUB32((a).r,(b).r); (res).i=SUB32((a).i,(b).i); \
+ }while(0)
+#define C_ADDTO( res , a)\
+ do {(res).r = ADD32((res).r, (a).r); (res).i = ADD32((res).i,(a).i);\
+ }while(0)
+
+#define C_SUBFROM( res , a)\
+ do {(res).r = ADD32((res).r,(a).r); (res).i = SUB32((res).i,(a).i); \
+ }while(0)
+
+#else /* not FIXED_POINT*/
+
+# define S_MUL(a,b) ( (a)*(b) )
+#define C_MUL(m,a,b) \
+ do{ (m).r = (a).r*(b).r - (a).i*(b).i;\
+ (m).i = (a).r*(b).i + (a).i*(b).r; }while(0)
+#define C_MULC(m,a,b) \
+ do{ (m).r = (a).r*(b).r + (a).i*(b).i;\
+ (m).i = (a).i*(b).r - (a).r*(b).i; }while(0)
+
+#define C_MUL4(m,a,b) C_MUL(m,a,b)
+
+# define C_FIXDIV(c,div) /* NOOP */
+# define C_MULBYSCALAR( c, s ) \
+ do{ (c).r *= (s);\
+ (c).i *= (s); }while(0)
+#endif
+
+#ifndef CHECK_OVERFLOW_OP
+# define CHECK_OVERFLOW_OP(a,op,b) /* noop */
+#endif
+
+#ifndef C_ADD
+#define C_ADD( res, a,b)\
+ do { \
+ CHECK_OVERFLOW_OP((a).r,+,(b).r)\
+ CHECK_OVERFLOW_OP((a).i,+,(b).i)\
+ (res).r=(a).r+(b).r; (res).i=(a).i+(b).i; \
+ }while(0)
+#define C_SUB( res, a,b)\
+ do { \
+ CHECK_OVERFLOW_OP((a).r,-,(b).r)\
+ CHECK_OVERFLOW_OP((a).i,-,(b).i)\
+ (res).r=(a).r-(b).r; (res).i=(a).i-(b).i; \
+ }while(0)
+#define C_ADDTO( res , a)\
+ do { \
+ CHECK_OVERFLOW_OP((res).r,+,(a).r)\
+ CHECK_OVERFLOW_OP((res).i,+,(a).i)\
+ (res).r += (a).r; (res).i += (a).i;\
+ }while(0)
+
+#define C_SUBFROM( res , a)\
+ do {\
+ CHECK_OVERFLOW_OP((res).r,-,(a).r)\
+ CHECK_OVERFLOW_OP((res).i,-,(a).i)\
+ (res).r -= (a).r; (res).i -= (a).i; \
+ }while(0)
+#endif /* C_ADD defined */
+
+#ifdef FIXED_POINT
+/*# define KISS_FFT_COS(phase) TRIG_UPSCALE*floor(MIN(32767,MAX(-32767,.5+32768 * cos (phase))))
+# define KISS_FFT_SIN(phase) TRIG_UPSCALE*floor(MIN(32767,MAX(-32767,.5+32768 * sin (phase))))*/
+# define KISS_FFT_COS(phase) floor(.5+TWID_MAX*cos (phase))
+# define KISS_FFT_SIN(phase) floor(.5+TWID_MAX*sin (phase))
+# define HALF_OF(x) ((x)>>1)
+#elif defined(USE_SIMD)
+# define KISS_FFT_COS(phase) _mm_set1_ps( cos(phase) )
+# define KISS_FFT_SIN(phase) _mm_set1_ps( sin(phase) )
+# define HALF_OF(x) ((x)*_mm_set1_ps(.5f))
+#else
+# define KISS_FFT_COS(phase) (kiss_fft_scalar) cos(phase)
+# define KISS_FFT_SIN(phase) (kiss_fft_scalar) sin(phase)
+# define HALF_OF(x) ((x)*.5f)
+#endif
+
+#define kf_cexp(x,phase) \
+ do{ \
+ (x)->r = KISS_FFT_COS(phase);\
+ (x)->i = KISS_FFT_SIN(phase);\
+ }while(0)
+
+#define kf_cexp2(x,phase) \
+ do{ \
+ (x)->r = TRIG_UPSCALE*celt_cos_norm((phase));\
+ (x)->i = TRIG_UPSCALE*celt_cos_norm((phase)-32768);\
+}while(0)
+
+#endif /* KISS_FFT_GUTS_H */