diff --git a/jni/libdbus-c++-0.9.0-android/examples/Makefile b/jni/libdbus-c++-0.9.0-android/examples/Makefile
new file mode 100644
index 0000000..7cc9336
--- /dev/null
+++ b/jni/libdbus-c++-0.9.0-android/examples/Makefile
@@ -0,0 +1,585 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# examples/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+pkgdatadir = $(datadir)/libdbus-c++
+pkgincludedir = $(includedir)/libdbus-c++
+pkglibdir = $(libdir)/libdbus-c++
+pkglibexecdir = $(libexecdir)/libdbus-c++
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-unknown-linux-gnu
+host_triplet = arm-unknown-linux-androideabi
+subdir = examples
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = properties echo hal glib ecore echo_ecore
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = ${SHELL} /home/evigier/git/libdbus-c++-0.9.0-android/missing --run aclocal-1.11
+AMTAR = ${SHELL} /home/evigier/git/libdbus-c++-0.9.0-android/missing --run tar
+AR = arm-linux-androideabi-ar
+AUTOCONF = ${SHELL} /home/evigier/git/libdbus-c++-0.9.0-android/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/evigier/git/libdbus-c++-0.9.0-android/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/evigier/git/libdbus-c++-0.9.0-android/missing --run automake-1.11
+AWK = gawk
+BUILD_LIBDBUS_CXX_DIR = $(top_builddir)
+CC = arm-linux-androideabi-gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -g -O2
+CPP = arm-linux-androideabi-gcc -E
+CPPFLAGS = 
+CXX = arm-linux-androideabi-g++
+CXXCPP = arm-linux-androideabi-g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS = -g -O2 -fvisibility=hidden
+CXX_FOR_BUILD = arm-linux-androideabi-g++
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = no
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GREP = /bin/grep
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+LD = /home/evigier/android-14b-toolchain/arm-linux-androideabi/bin/ld
+LDFLAGS = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBOBJS = 
+MAKEINFO = ${SHELL} /home/evigier/git/libdbus-c++-0.9.0-android/missing --run makeinfo
+MANIFEST_TOOL = :
+MKDIR_P = /bin/mkdir -p
+NM = /home/evigier/android-14b-toolchain/bin/arm-linux-androideabi-nm -B
+NMEDIT = 
+OBJDUMP = arm-linux-androideabi-objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = libdbus-c++
+PACKAGE_BUGREPORT = andreas.volz@tux-style.com
+PACKAGE_NAME = libdbus-c++
+PACKAGE_STRING = libdbus-c++ 0.9.0
+PACKAGE_TARNAME = libdbus-c--
+PACKAGE_URL = 
+PACKAGE_VERSION = 0.9.0
+PATH_SEPARATOR = :
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PTHREAD_CC = arm-linux-androideabi-gcc
+PTHREAD_CFLAGS = 
+PTHREAD_LIBS = 
+RANLIB = arm-linux-androideabi-ranlib
+RT_LIBS = 
+SED = /bin/sed
+SET_MAKE = 
+SHELL = /bin/bash
+STRIP = arm-linux-androideabi-strip
+VERSION = 0.9.0
+abs_builddir = /home/evigier/git/libdbus-c++-0.9.0-android/examples
+abs_srcdir = /home/evigier/git/libdbus-c++-0.9.0-android/examples
+abs_top_builddir = /home/evigier/git/libdbus-c++-0.9.0-android
+abs_top_srcdir = /home/evigier/git/libdbus-c++-0.9.0-android
+ac_ct_AR = 
+ac_ct_CC = 
+ac_ct_CXX = 
+ac_ct_DUMPBIN = 
+acx_pthread_config = 
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-unknown-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = unknown
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+dbus_CFLAGS = -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include  
+dbus_LIBS = -ldbus-1 -lpthread -lrt  
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+ecore_CFLAGS = 
+ecore_LIBS = 
+exec_prefix = ${prefix}
+glib_CFLAGS = -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include  
+glib_LIBS = -lglib-2.0  
+gtkmm_CFLAGS = 
+gtkmm_LIBS = 
+host = arm-unknown-linux-androideabi
+host_alias = arm-linux-androideabi
+host_cpu = arm
+host_os = linux-androideabi
+host_vendor = unknown
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /home/evigier/git/libdbus-c++-0.9.0-android/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+mandir = ${datarootdir}/man
+mkdir_p = /bin/mkdir -p
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+prefix = /home/evigier/android-ndk-r8b/platforms/android-14/arch-arm/usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target_alias = 
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+xml_CFLAGS = 
+xml_LIBS = -lexpat
+SUBDIRS = properties echo hal glib ecore echo_ecore
+MAINTAINERCLEANFILES = \
+	Makefile.in
+
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign examples/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign examples/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am check check-am clean clean-generic clean-libtool \
+	ctags ctags-recursive distclean distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: