#13795: Initial commit for sflphone-android
includes: libexpat libyaml libdbus-c++ commoncpp ccrtp
libdbus (from android-4.0.4 sources)
TODO:
- git ignores "/jni/sflphone", sflphone repo should be cloned.
- sflphone-android only needs daemon directory. Ideally it should be possible
to clone it without cloning the whole sflphone project.
into sfl-android (commit 6a0fa7a "#13961: Fix cipher handling" has been used here)
- add pjsip-android project as a git submodule
- sflphone-android needs pjsip android project. Ideally daemon git repository
should not embed pjsip. Instead pjsip should be clone from official repositories.
Considering this, structure should have three distincts git repos:
sflphone-android/.git
sflphone-android/jni/ccrtp-1.8.0-android
sflphone-android/jni/commoncpp2-1.8.1-android
sflphone-android/jni/dbus
sflphone-android/jni/libdbus-c++-0.9.0-android
sflphone-android/jni/libexpat
sflphone-android/jni/libyaml
sflphone-android/jni/sflphone-daemon/.git
sflphone-android/jni/sflphone-daemon/src/audio
sflphone-android/jni/sflphone-daemon/src/config
sflphone-android/jni/sflphone-daemon/src/dbus
sflphone-android/jni/sflphone-daemon/src/history
sflphone-android/jni/sflphone-daemon/src/hooks
sflphone-android/jni/sflphone-daemon/src/iax
sflphone-android/jni/sflphone-daemon/src/sip
sflphone-android/jni/sflphone-daemon/src/video
sflphone-android/jni/pjsip-android/.git
Signed-off-by: Emeric Vigier <emeric.vigier@savoirfairelinux.com>
diff --git a/jni/commoncpp2-1.8.1-android/doc/Makefile b/jni/commoncpp2-1.8.1-android/doc/Makefile
new file mode 100644
index 0000000..ec5688e
--- /dev/null
+++ b/jni/commoncpp2-1.8.1-android/doc/Makefile
@@ -0,0 +1,712 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# doc/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+# Copyright (C) 1999-2005 Open Source Telecom Corporation.
+#
+# This file is free software; as a special exception the author gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+
+pkgdatadir = $(datadir)/commoncpp2
+pkgincludedir = $(includedir)/commoncpp2
+pkglibdir = $(libdir)/commoncpp2
+pkglibexecdir = $(libexecdir)/commoncpp2
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-unknown-linux-gnu
+host_triplet = arm-unknown-linux-androideabi
+target_triplet = arm-unknown-linux-androideabi
+subdir = doc
+DIST_COMMON = $(commoncpp2_TEXINFOS) $(srcdir)/Doxyfile.in \
+ $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/m4/ost_cxx.m4 $(top_srcdir)/m4/ost_debug.m4 \
+ $(top_srcdir)/m4/ost_dynamic.m4 $(top_srcdir)/m4/ost_endian.m4 \
+ $(top_srcdir)/m4/ost_getopt.m4 $(top_srcdir)/m4/ost_maint.m4 \
+ $(top_srcdir)/m4/ost_misc.m4 $(top_srcdir)/m4/ost_poll.m4 \
+ $(top_srcdir)/m4/ost_posix.m4 $(top_srcdir)/m4/ost_prog.m4 \
+ $(top_srcdir)/m4/ost_pthread.m4 \
+ $(top_srcdir)/m4/ost_reentrant.m4 \
+ $(top_srcdir)/m4/ost_signal.m4 $(top_srcdir)/m4/ost_socket.m4 \
+ $(top_srcdir)/m4/ost_ssl.m4 $(top_srcdir)/m4/ost_stlport.m4 \
+ $(top_srcdir)/m4/ost_string.m4 $(top_srcdir)/m4/ost_systime.m4 \
+ $(top_srcdir)/m4/ost_types.m4 $(top_srcdir)/m4/ost_win32.m4 \
+ $(top_srcdir)/m4/win32msc.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = Doxyfile
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+INFO_DEPS = $(srcdir)/commoncpp2.info
+TEXINFO_TEX = $(top_srcdir)/autoconf/texinfo.tex
+am__TEXINFO_TEX_DIR = $(top_srcdir)/autoconf
+DVIS = commoncpp2.dvi
+PDFS = commoncpp2.pdf
+PSS = commoncpp2.ps
+HTMLS = commoncpp2.html
+TEXINFOS = commoncpp2.texi
+TEXI2DVI = texi2dvi
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
+am__installdirs = "$(DESTDIR)$(infodir)"
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+DATA = $(noinst_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/evigier/git/commoncpp2-1.8.1-android/autoconf/missing --run aclocal-1.11
+AMTAR = ${SHELL} /home/evigier/git/commoncpp2-1.8.1-android/autoconf/missing --run tar
+AR = arm-linux-androideabi-ar
+AS = as
+AUTOCONF = ${SHELL} /home/evigier/git/commoncpp2-1.8.1-android/autoconf/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/evigier/git/commoncpp2-1.8.1-android/autoconf/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/evigier/git/commoncpp2-1.8.1-android/autoconf/missing --run automake-1.11
+AWK = gawk
+BASE_LIB = ../src/libccgnu2.la
+CC = arm-linux-androideabi-gcc
+CCDEPMODE = depmode=gcc3
+CCXX_DIR = $(top_srcdir)/inc
+CFLAGS = -g -O2
+COMMON_FLAGS = -D_GNU_SOURCE -I/home/evigier/android-ndk-r8b/platforms/android-14/arch-arm/usr/include
+CPP = arm-linux-androideabi-gcc -E
+CPPFLAGS =
+CPPUNIT_LIBS =
+CXX = arm-linux-androideabi-g++
+CXXCPP = arm-linux-androideabi-g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS = -Wno-psabi
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = dlltool
+DOXYGEN = no
+DSYMUTIL =
+DUMPBIN =
+DYN_LOADER = -ldl
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+EGREP = /bin/grep -E
+EXEEXT =
+FGREP = /bin/grep -F
+FTPDIR =
+GETOPT_LIBS =
+GREP = /bin/grep
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+KDOC_DIR = $(top_srcdir)/doc
+LD = /home/evigier/android-14b-toolchain/arm-linux-androideabi/bin/ld
+LDFLAGS =
+LIBGETOPTOBJS =
+LIBOBJS =
+LIBS = -L/home/evigier/android-ndk-r8b/platforms/android-14/arch-arm/usr/lib
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIB_MAJOR = 0
+LIB_VERSION = 1_8
+LIPO =
+LN_S = ln -s
+LTLIBOBJS =
+LT_CCXX_VERSION = -version-info 0:1
+LT_MAJOR = 0
+LT_MINOR = 1
+LT_RELEASE = 1.8
+LT_SUBVER = 0.1
+MAINT = #
+MAKEINFO = ${SHELL} /home/evigier/git/commoncpp2-1.8.1-android/autoconf/missing --run makeinfo
+MANIFEST_TOOL = :
+MKDIR_P = /bin/mkdir -p
+MODULE_FLAGS = -module -shared -avoid-version
+NM = /home/evigier/android-14b-toolchain/bin/arm-linux-androideabi-nm -B
+NMEDIT =
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL =
+OTOOL64 =
+PACKAGE = commoncpp2
+PACKAGE_BUGREPORT =
+PACKAGE_NAME =
+PACKAGE_STRING =
+PACKAGE_TARNAME =
+PACKAGE_URL =
+PACKAGE_VERSION =
+PATH_SEPARATOR = :
+PTHREAD_CC =
+RANLIB = arm-linux-androideabi-ranlib
+SED = /bin/sed
+SET_MAKE =
+SHARED_FLAGS =
+SHELL = /bin/bash
+SOCKET_LIBS =
+SSL_LIBS =
+STAGE2 =
+STRIP = arm-linux-androideabi-strip
+THREAD_FLAGS =
+THREAD_LIBS = -pthread
+VERSION = 1.8.1
+WARN_FLAGS = -pedantic -Wall
+WINVERSION = 1,8,1,0
+ZSTREAM_LIBS = -lz
+abs_builddir = /home/evigier/git/commoncpp2-1.8.1-android/doc
+abs_srcdir = /home/evigier/git/commoncpp2-1.8.1-android/doc
+abs_top_builddir = /home/evigier/git/commoncpp2-1.8.1-android
+abs_top_srcdir = /home/evigier/git/commoncpp2-1.8.1-android
+ac_ct_AR =
+ac_ct_CC =
+ac_ct_CXX =
+ac_ct_DUMPBIN =
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-unknown-linux-gnu
+build_alias =
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = unknown
+builddir = .
+ccincludedir = ${includedir}/cc++2
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE}
+dvidir = ${docdir}
+etc_confdir = /home/evigier/android-ndk-r8b/platforms/android-14/arch-arm/usr/etc
+exec_prefix = ${prefix}
+host = arm-unknown-linux-androideabi
+host_alias = arm-linux-androideabi
+host_cpu = arm
+host_os = linux-androideabi
+host_vendor = unknown
+htmldir = ${docdir}
+includedir = ${prefix}/include
+incprefix =
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /home/evigier/git/commoncpp2-1.8.1-android/autoconf/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+mandir = ${datarootdir}/man
+mkdir_p = /bin/mkdir -p
+oldincludedir = /usr/include
+ost_cv_dynloader = yes
+pdfdir = ${docdir}
+prefix = /home/evigier/android-ndk-r8b/platforms/android-14/arch-arm/usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = ${prefix}/etc
+target = arm-unknown-linux-androideabi
+target_alias =
+target_cpu = arm
+target_os = linux-androideabi
+target_vendor = unknown
+thrprefix = /usr/include
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+MAINTAINERCLEANFILES = Makefile.in Makefile
+EXTRA_DIST = Doxyfile Doxyfile.in
+info_TEXINFOS = commoncpp2.texi
+commoncpp2_TEXINFOS = gpl.texi fdl.texi fdlnotice.texi
+#noinst_DATA = doxy
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .dvi .html .info .pdf .ps .texi
+$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: # $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+.texi.info:
+ restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+ am__cwd=`pwd` && $(am__cd) $(srcdir) && \
+ rm -rf $$backupdir && mkdir $$backupdir && \
+ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+ done; \
+ else :; fi && \
+ cd "$$am__cwd"; \
+ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+ -o $@ $<; \
+ then \
+ rc=0; \
+ $(am__cd) $(srcdir); \
+ else \
+ rc=$$?; \
+ $(am__cd) $(srcdir) && \
+ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+ fi; \
+ rm -rf $$backupdir; exit $$rc
+
+.texi.dvi:
+ TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+ $(TEXI2DVI) $<
+
+.texi.pdf:
+ TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+ $(TEXI2PDF) $<
+
+.texi.html:
+ rm -rf $(@:.html=.htp)
+ if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+ -o $(@:.html=.htp) $<; \
+ then \
+ rm -rf $@; \
+ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+ mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
+ else \
+ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+ rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
+ exit 1; \
+ fi
+$(srcdir)/commoncpp2.info: commoncpp2.texi $(commoncpp2_TEXINFOS)
+commoncpp2.dvi: commoncpp2.texi $(commoncpp2_TEXINFOS)
+commoncpp2.pdf: commoncpp2.texi $(commoncpp2_TEXINFOS)
+commoncpp2.html: commoncpp2.texi $(commoncpp2_TEXINFOS)
+.dvi.ps:
+ TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ $(DVIPS) -o $@ $<
+
+uninstall-dvi-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+ rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+ done
+
+uninstall-html-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+ rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+ done
+
+uninstall-info-am:
+ @$(PRE_UNINSTALL)
+ @if test -d '$(DESTDIR)$(infodir)' && \
+ (install-info --version && \
+ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+ list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+ if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+ then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
+ done; \
+ else :; fi
+ @$(NORMAL_UNINSTALL)
+ @list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+ (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
+ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+ else :; fi); \
+ done
+
+uninstall-pdf-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+ done
+
+uninstall-ps-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PSS)'; test -n "$(psdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(psdir)/$$f"; \
+ done
+
+dist-info: $(INFO_DEPS)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ list='$(INFO_DEPS)'; \
+ for base in $$list; do \
+ case $$base in \
+ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
+ if test -f $$base; then d=.; else d=$(srcdir); fi; \
+ base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+ if test -f $$file; then \
+ relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+ test -f "$(distdir)/$$relfile" || \
+ cp -p $$file "$(distdir)/$$relfile"; \
+ else :; fi; \
+ done; \
+ done
+
+mostlyclean-aminfo:
+ -rm -rf commoncpp2.aux commoncpp2.cp commoncpp2.cps commoncpp2.fn \
+ commoncpp2.fns commoncpp2.ky commoncpp2.kys commoncpp2.log \
+ commoncpp2.pg commoncpp2.pgs commoncpp2.tmp commoncpp2.toc \
+ commoncpp2.tp commoncpp2.tps commoncpp2.vr commoncpp2.vrs
+
+clean-aminfo:
+ -test -z "commoncpp2.dvi commoncpp2.pdf commoncpp2.ps commoncpp2.html" \
+ || rm -rf commoncpp2.dvi commoncpp2.pdf commoncpp2.ps commoncpp2.html
+
+maintainer-clean-aminfo:
+ @list='$(INFO_DEPS)'; for i in $$list; do \
+ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
+ done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-info
+check-am: all-am
+check: check-am
+all-am: Makefile $(INFO_DEPS) $(DATA)
+installdirs:
+ for dir in "$(DESTDIR)$(infodir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-aminfo clean-generic clean-libtool clean-local \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am: $(DVIS)
+
+html: html-am
+
+html-am: $(HTMLS)
+
+info: info-am
+
+info-am: $(INFO_DEPS)
+
+install-data-am: install-info-am
+
+install-dvi: install-dvi-am
+
+install-dvi-am: $(DVIS)
+ @$(NORMAL_INSTALL)
+ test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
+ @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
+ done
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+ @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ $(am__strip_dir) \
+ if test -d "$$d$$p"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+ else \
+ list2="$$list2 $$d$$p"; \
+ fi; \
+ done; \
+ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+ done; }
+install-info: install-info-am
+
+install-info-am: $(INFO_DEPS)
+ @$(NORMAL_INSTALL)
+ test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+ for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+ if test -f $$ifile; then \
+ echo "$$ifile"; \
+ else : ; fi; \
+ done; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
+ @$(POST_INSTALL)
+ @if (install-info --version && \
+ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
+ done; \
+ else : ; fi
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+ @$(NORMAL_INSTALL)
+ test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
+install-ps: install-ps-am
+
+install-ps-am: $(PSS)
+ @$(NORMAL_INSTALL)
+ test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
+ @list='$(PSS)'; test -n "$(psdir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+ maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am: $(PDFS)
+
+ps: ps-am
+
+ps-am: $(PSS)
+
+uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
+ uninstall-pdf-am uninstall-ps-am
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
+ clean-libtool clean-local dist-info distclean \
+ distclean-generic distclean-libtool distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
+ mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool pdf \
+ pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
+ uninstall-html-am uninstall-info-am uninstall-pdf-am \
+ uninstall-ps-am
+
+
+#doxy: Doxyfile
+# $(DOXYGEN) Doxyfile
+# touch doxy
+
+clean-local:
+ -rm -rf html
+ -rm -rf latex
+ -rm -rf man3
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: