* #27232: jni: added pjproject checkout as regular git content
We will remove it once the next release of pjsip (with Android support)
comes out and is merged into SFLphone.
diff --git a/jni/pjproject-android/pjlib/include/pj/config_site_sample.h b/jni/pjproject-android/pjlib/include/pj/config_site_sample.h
new file mode 100644
index 0000000..c48ea8e
--- /dev/null
+++ b/jni/pjproject-android/pjlib/include/pj/config_site_sample.h
@@ -0,0 +1,485 @@
+/*
+ * This file contains several sample settings especially for Windows
+ * Mobile and Symbian targets. You can include this file in your
+ * <pj/config_site.h> file.
+ *
+ * The Windows Mobile and Symbian settings will be activated
+ * automatically if you include this file.
+ *
+ * In addition, you may specify one of these macros (before including
+ * this file) to activate additional settings:
+ *
+ * #define PJ_CONFIG_NOKIA_APS_DIRECT
+ * Use this macro to activate the APS-Direct feature. Please see
+ * http://trac.pjsip.org/repos/wiki/Nokia_APS_VAS_Direct for more
+ * info.
+ *
+ * #define PJ_CONFIG_WIN32_WMME_DIRECT
+ * Configuration to activate "APS-Direct" media mode on Windows or
+ * Windows Mobile, useful for testing purposes only.
+ */
+
+
+/*
+ * Typical configuration for WinCE target.
+ */
+#if defined(PJ_WIN32_WINCE) && PJ_WIN32_WINCE!=0
+
+ /*
+ * PJLIB settings.
+ */
+
+ /* Disable floating point support */
+ #define PJ_HAS_FLOATING_POINT 0
+
+ /*
+ * PJMEDIA settings
+ */
+
+ /* Select codecs to disable */
+ #define PJMEDIA_HAS_L16_CODEC 0
+ #define PJMEDIA_HAS_ILBC_CODEC 0
+
+ /* We probably need more buffers on WM, so increase the limit */
+ #define PJMEDIA_SOUND_BUFFER_COUNT 32
+
+ /* Fine tune Speex's default settings for best performance/quality */
+ #define PJMEDIA_CODEC_SPEEX_DEFAULT_QUALITY 5
+
+ /* For CPU reason, disable speex AEC and use the echo suppressor. */
+ #define PJMEDIA_HAS_SPEEX_AEC 0
+
+ /* Previously, resampling is disabled due to performance reason and
+ * this condition prevented some 'light' wideband codecs (e.g: G722.1)
+ * to work along with narrowband codecs. Lately, some tests showed
+ * that 16kHz <-> 8kHz resampling using libresample small filter was
+ * affordable on ARM9 260 MHz, so here we decided to enable resampling.
+ * Note that it is important to make sure that libresample is created
+ * using small filter. For example PJSUA_DEFAULT_CODEC_QUALITY must
+ * be set to 3 or 4 so pjsua-lib will apply small filter resampling.
+ */
+ //#define PJMEDIA_RESAMPLE_IMP PJMEDIA_RESAMPLE_NONE
+ #define PJMEDIA_RESAMPLE_IMP PJMEDIA_RESAMPLE_LIBRESAMPLE
+
+ /* Use the lighter WSOLA implementation */
+ #define PJMEDIA_WSOLA_IMP PJMEDIA_WSOLA_IMP_WSOLA_LITE
+
+ /*
+ * PJSIP settings.
+ */
+
+ /* Set maximum number of dialog/transaction/calls to minimum to reduce
+ * memory usage
+ */
+ #define PJSIP_MAX_TSX_COUNT 31
+ #define PJSIP_MAX_DIALOG_COUNT 31
+ #define PJSUA_MAX_CALLS 4
+
+ /*
+ * PJSUA settings
+ */
+
+ /* Default codec quality, previously was set to 5, however it is now
+ * set to 4 to make sure pjsua instantiates resampler with small filter.
+ */
+ #define PJSUA_DEFAULT_CODEC_QUALITY 4
+
+ /* Set maximum number of objects to minimum to reduce memory usage */
+ #define PJSUA_MAX_ACC 4
+ #define PJSUA_MAX_PLAYERS 4
+ #define PJSUA_MAX_RECORDERS 4
+ #define PJSUA_MAX_CONF_PORTS (PJSUA_MAX_CALLS+2*PJSUA_MAX_PLAYERS)
+ #define PJSUA_MAX_BUDDIES 32
+
+#endif /* PJ_WIN32_WINCE */
+
+
+/*
+ * Typical configuration for Symbian OS target
+ */
+#if defined(PJ_SYMBIAN) && PJ_SYMBIAN!=0
+
+ /*
+ * PJLIB settings.
+ */
+
+ /* Disable floating point support */
+ #define PJ_HAS_FLOATING_POINT 0
+
+ /* Misc PJLIB setting */
+ #define PJ_MAXPATH 80
+
+ /* This is important for Symbian. Symbian lacks vsnprintf(), so
+ * if the log buffer is not long enough it's possible that
+ * large incoming packet will corrupt memory when the log tries
+ * to log the packet.
+ */
+ #define PJ_LOG_MAX_SIZE (PJSIP_MAX_PKT_LEN+500)
+
+ /* Since we don't have threads, log buffer can use static buffer
+ * rather than stack
+ */
+ #define PJ_LOG_USE_STACK_BUFFER 0
+
+ /* Disable check stack since it increases footprint */
+ #define PJ_OS_HAS_CHECK_STACK 0
+
+
+ /*
+ * PJMEDIA settings
+ */
+
+ /* Disable non-Symbian audio devices */
+ #define PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO 0
+ #define PJMEDIA_AUDIO_DEV_HAS_WMME 0
+
+ /* Select codecs to disable */
+ #define PJMEDIA_HAS_L16_CODEC 0
+ #define PJMEDIA_HAS_ILBC_CODEC 0
+ #define PJMEDIA_HAS_G722_CODEC 0
+
+ /* Fine tune Speex's default settings for best performance/quality */
+ #define PJMEDIA_CODEC_SPEEX_DEFAULT_QUALITY 5
+
+ /* For CPU reason, disable speex AEC and use the echo suppressor. */
+ #define PJMEDIA_HAS_SPEEX_AEC 0
+
+ /* Previously, resampling is disabled due to performance reason and
+ * this condition prevented some 'light' wideband codecs (e.g: G722.1)
+ * to work along with narrowband codecs. Lately, some tests showed
+ * that 16kHz <-> 8kHz resampling using libresample small filter was
+ * affordable on ARM9 222 MHz, so here we decided to enable resampling.
+ * Note that it is important to make sure that libresample is created
+ * using small filter. For example PJSUA_DEFAULT_CODEC_QUALITY must
+ * be set to 3 or 4 so pjsua-lib will apply small filter resampling.
+ */
+ //#define PJMEDIA_RESAMPLE_IMP PJMEDIA_RESAMPLE_NONE
+ #define PJMEDIA_RESAMPLE_IMP PJMEDIA_RESAMPLE_LIBRESAMPLE
+
+ /* Use the lighter WSOLA implementation */
+ #define PJMEDIA_WSOLA_IMP PJMEDIA_WSOLA_IMP_WSOLA_LITE
+
+ /* We probably need more buffers especially if MDA audio backend
+ * is used, so increase the limit
+ */
+ #define PJMEDIA_SOUND_BUFFER_COUNT 32
+
+ /*
+ * PJSIP settings.
+ */
+
+ /* Disable safe module access, since we don't use multithreading */
+ #define PJSIP_SAFE_MODULE 0
+
+ /* Use large enough packet size */
+ #define PJSIP_MAX_PKT_LEN 2000
+
+ /* Symbian has problem with too many large blocks */
+ #define PJSIP_POOL_LEN_ENDPT 1000
+ #define PJSIP_POOL_INC_ENDPT 1000
+ #define PJSIP_POOL_RDATA_LEN 2000
+ #define PJSIP_POOL_RDATA_INC 2000
+ #define PJSIP_POOL_LEN_TDATA 2000
+ #define PJSIP_POOL_INC_TDATA 512
+ #define PJSIP_POOL_LEN_UA 2000
+ #define PJSIP_POOL_INC_UA 1000
+ #define PJSIP_POOL_TSX_LAYER_LEN 256
+ #define PJSIP_POOL_TSX_LAYER_INC 256
+ #define PJSIP_POOL_TSX_LEN 512
+ #define PJSIP_POOL_TSX_INC 128
+
+ /*
+ * PJSUA settings.
+ */
+
+ /* Default codec quality, previously was set to 5, however it is now
+ * set to 4 to make sure pjsua instantiates resampler with small filter.
+ */
+ #define PJSUA_DEFAULT_CODEC_QUALITY 4
+
+ /* Set maximum number of dialog/transaction/calls to minimum */
+ #define PJSIP_MAX_TSX_COUNT 31
+ #define PJSIP_MAX_DIALOG_COUNT 31
+ #define PJSUA_MAX_CALLS 4
+
+ /* Other pjsua settings */
+ #define PJSUA_MAX_ACC 4
+ #define PJSUA_MAX_PLAYERS 4
+ #define PJSUA_MAX_RECORDERS 4
+ #define PJSUA_MAX_CONF_PORTS (PJSUA_MAX_CALLS+2*PJSUA_MAX_PLAYERS)
+ #define PJSUA_MAX_BUDDIES 32
+#endif
+
+
+/*
+ * Additional configuration to activate APS-Direct feature for
+ * Nokia S60 target
+ *
+ * Please see http://trac.pjsip.org/repos/wiki/Nokia_APS_VAS_Direct
+ */
+#ifdef PJ_CONFIG_NOKIA_APS_DIRECT
+
+ /* MUST use switchboard rather than the conference bridge */
+ #define PJMEDIA_CONF_USE_SWITCH_BOARD 1
+
+ /* Enable APS sound device backend and disable MDA & VAS */
+ #define PJMEDIA_AUDIO_DEV_HAS_SYMB_MDA 0
+ #define PJMEDIA_AUDIO_DEV_HAS_SYMB_APS 1
+ #define PJMEDIA_AUDIO_DEV_HAS_SYMB_VAS 0
+
+ /* Enable passthrough codec framework */
+ #define PJMEDIA_HAS_PASSTHROUGH_CODECS 1
+
+ /* And selectively enable which codecs are supported by the handset */
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMU 1
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMA 1
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_AMR 1
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_G729 1
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_ILBC 1
+
+#endif
+
+
+/*
+ * Additional configuration to activate VAS-Direct feature for
+ * Nokia S60 target
+ *
+ * Please see http://trac.pjsip.org/repos/wiki/Nokia_APS_VAS_Direct
+ */
+#ifdef PJ_CONFIG_NOKIA_VAS_DIRECT
+
+ /* MUST use switchboard rather than the conference bridge */
+ #define PJMEDIA_CONF_USE_SWITCH_BOARD 1
+
+ /* Enable VAS sound device backend and disable MDA & APS */
+ #define PJMEDIA_AUDIO_DEV_HAS_SYMB_MDA 0
+ #define PJMEDIA_AUDIO_DEV_HAS_SYMB_APS 0
+ #define PJMEDIA_AUDIO_DEV_HAS_SYMB_VAS 1
+
+ /* Enable passthrough codec framework */
+ #define PJMEDIA_HAS_PASSTHROUGH_CODECS 1
+
+ /* And selectively enable which codecs are supported by the handset */
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMU 1
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMA 1
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_AMR 1
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_G729 1
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_ILBC 1
+
+#endif
+
+
+/*
+ * Configuration to activate "APS-Direct" media mode on Windows,
+ * useful for testing purposes only.
+ */
+#ifdef PJ_CONFIG_WIN32_WMME_DIRECT
+
+ /* MUST use switchboard rather than the conference bridge */
+ #define PJMEDIA_CONF_USE_SWITCH_BOARD 1
+
+ /* Only WMME supports the "direct" feature */
+ #define PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO 0
+ #define PJMEDIA_AUDIO_DEV_HAS_WMME 1
+
+ /* Enable passthrough codec framework */
+ #define PJMEDIA_HAS_PASSTHROUGH_CODECS 1
+
+ /* Only PCMA and PCMU are supported by WMME-direct */
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMU 1
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_PCMA 1
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_AMR 0
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_G729 0
+ #define PJMEDIA_HAS_PASSTHROUGH_CODEC_ILBC 0
+
+#endif
+
+/*
+ * iPhone sample settings.
+ */
+#if PJ_CONFIG_IPHONE
+ /*
+ * PJLIB settings.
+ */
+
+ /* Both armv6 and armv7 has FP hardware support.
+ * See https://trac.pjsip.org/repos/ticket/1589 for more info
+ */
+ #define PJ_HAS_FLOATING_POINT 1
+
+ /*
+ * PJMEDIA settings
+ */
+
+ /* We have our own native CoreAudio backend */
+ #define PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO 0
+ #define PJMEDIA_AUDIO_DEV_HAS_WMME 0
+ #define PJMEDIA_AUDIO_DEV_HAS_COREAUDIO 1
+
+ /* The CoreAudio backend has built-in echo canceller! */
+ #define PJMEDIA_HAS_SPEEX_AEC 0
+
+ /* Disable some codecs */
+ #define PJMEDIA_HAS_L16_CODEC 0
+ #define PJMEDIA_HAS_G722_CODEC 0
+
+ /* Use the built-in CoreAudio's iLBC codec (yay!) */
+ #define PJMEDIA_HAS_ILBC_CODEC 1
+ #define PJMEDIA_ILBC_CODEC_USE_COREAUDIO 1
+
+ /* Fine tune Speex's default settings for best performance/quality */
+ #define PJMEDIA_CODEC_SPEEX_DEFAULT_QUALITY 5
+
+ /*
+ * PJSIP settings.
+ */
+
+ /* Increase allowable packet size, just in case */
+ //#define PJSIP_MAX_PKT_LEN 2000
+
+ /*
+ * PJSUA settings.
+ */
+
+ /* Default codec quality, previously was set to 5, however it is now
+ * set to 4 to make sure pjsua instantiates resampler with small filter.
+ */
+ #define PJSUA_DEFAULT_CODEC_QUALITY 4
+
+ /* Set maximum number of dialog/transaction/calls to minimum */
+ #define PJSIP_MAX_TSX_COUNT 31
+ #define PJSIP_MAX_DIALOG_COUNT 31
+ #define PJSUA_MAX_CALLS 4
+
+ /* Other pjsua settings */
+ #define PJSUA_MAX_ACC 4
+ #define PJSUA_MAX_PLAYERS 4
+ #define PJSUA_MAX_RECORDERS 4
+ #define PJSUA_MAX_CONF_PORTS (PJSUA_MAX_CALLS+2*PJSUA_MAX_PLAYERS)
+ #define PJSUA_MAX_BUDDIES 32
+
+#endif
+
+/*
+ * Android sample settings.
+ */
+#if PJ_CONFIG_ANDROID
+
+ #define PJ_ANDROID 1
+
+ /*
+ * PJLIB settings.
+ */
+
+ /* Disable floating point support */
+ #undef PJ_HAS_FLOATING_POINT
+ #define PJ_HAS_FLOATING_POINT 0
+
+ /*
+ * PJMEDIA settings
+ */
+
+ /* We have our own OpenSL ES backend */
+ #define PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO 0
+ #define PJMEDIA_AUDIO_DEV_HAS_WMME 0
+ #define PJMEDIA_AUDIO_DEV_HAS_OPENSL 1
+ #define PJMEDIA_AUDIO_DEV_HAS_ANDROID_JNI 0
+
+ /* Disable some codecs */
+ #define PJMEDIA_HAS_L16_CODEC 0
+ #define PJMEDIA_HAS_G722_CODEC 0
+
+ /* Fine tune Speex's default settings for best performance/quality */
+ #define PJMEDIA_CODEC_SPEEX_DEFAULT_QUALITY 5
+
+ /*
+ * PJSIP settings.
+ */
+
+ /* Increase allowable packet size, just in case */
+ //#define PJSIP_MAX_PKT_LEN 2000
+
+ /*
+ * PJSUA settings.
+ */
+
+ /* Default codec quality, previously was set to 5, however it is now
+ * set to 4 to make sure pjsua instantiates resampler with small filter.
+ */
+ #define PJSUA_DEFAULT_CODEC_QUALITY 4
+
+ /* Set maximum number of dialog/transaction/calls to minimum */
+ #define PJSIP_MAX_TSX_COUNT 31
+ #define PJSIP_MAX_DIALOG_COUNT 31
+ #define PJSUA_MAX_CALLS 4
+
+ /* Other pjsua settings */
+ #define PJSUA_MAX_ACC 4
+ #define PJSUA_MAX_PLAYERS 4
+ #define PJSUA_MAX_RECORDERS 4
+ #define PJSUA_MAX_CONF_PORTS (PJSUA_MAX_CALLS+2*PJSUA_MAX_PLAYERS)
+ #define PJSUA_MAX_BUDDIES 32
+#endif
+
+
+/*
+ * BB10
+ */
+#if defined(PJ_CONFIG_BB10) && PJ_CONFIG_BB10
+ /* Quality 3 - 4 to use resampling small filter */
+ #define PJSUA_DEFAULT_CODEC_QUALITY 4
+ #define PJMEDIA_HAS_LEGACY_SOUND_API 0
+ #undef PJMEDIA_HAS_SPEEX_AEC
+ #define PJMEDIA_HAS_SPEEX_AEC 0
+ #undef PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO
+ #define PJMEDIA_AUDIO_DEV_HAS_PORTAUDIO 0
+#endif
+
+
+/*
+ * Minimum size
+ */
+#ifdef PJ_CONFIG_MINIMAL_SIZE
+
+# undef PJ_OS_HAS_CHECK_STACK
+# define PJ_OS_HAS_CHECK_STACK 0
+# define PJ_LOG_MAX_LEVEL 0
+# define PJ_ENABLE_EXTRA_CHECK 0
+# define PJ_HAS_ERROR_STRING 0
+# undef PJ_IOQUEUE_MAX_HANDLES
+/* Putting max handles to lower than 32 will make pj_fd_set_t size smaller
+ * than native fdset_t and will trigger assertion on sock_select.c.
+ */
+# define PJ_IOQUEUE_MAX_HANDLES 32
+# define PJ_CRC32_HAS_TABLES 0
+# define PJSIP_MAX_TSX_COUNT 15
+# define PJSIP_MAX_DIALOG_COUNT 15
+# define PJSIP_UDP_SO_SNDBUF_SIZE 4000
+# define PJSIP_UDP_SO_RCVBUF_SIZE 4000
+# define PJMEDIA_HAS_ALAW_ULAW_TABLE 0
+
+#elif defined(PJ_CONFIG_MAXIMUM_SPEED)
+# define PJ_SCANNER_USE_BITWISE 0
+# undef PJ_OS_HAS_CHECK_STACK
+# define PJ_OS_HAS_CHECK_STACK 0
+# define PJ_LOG_MAX_LEVEL 3
+# define PJ_ENABLE_EXTRA_CHECK 0
+# define PJ_IOQUEUE_MAX_HANDLES 5000
+# define PJSIP_MAX_TSX_COUNT ((640*1024)-1)
+# define PJSIP_MAX_DIALOG_COUNT ((640*1024)-1)
+# define PJSIP_UDP_SO_SNDBUF_SIZE (24*1024*1024)
+# define PJSIP_UDP_SO_RCVBUF_SIZE (24*1024*1024)
+# define PJ_DEBUG 0
+# define PJSIP_SAFE_MODULE 0
+# define PJ_HAS_STRICMP_ALNUM 0
+# define PJ_HASH_USE_OWN_TOLOWER 1
+# define PJSIP_UNESCAPE_IN_PLACE 1
+
+# if defined(PJ_WIN32) || defined(PJ_WIN64)
+# define PJSIP_MAX_NET_EVENTS 10
+# endif
+
+# define PJSUA_MAX_CALLS 512
+
+#endif
+